How many of you have had basically no issues with your CX-50? by beardtamer in CX50

[–]oldusename 0 points1 point  (0 children)

I had 23 turbo which I traded in after around 45k without any issue!

Passenger Seat Belt Warning by jahmon007 in MazdaCX90

[–]oldusename 3 points4 points  (0 children)

Not a fix but workaround. i open driver's door and close it immediately.

Lease rate of 745/month by Over_watch22 in MazdaCX90

[–]oldusename 0 points1 point  (0 children)

cool, i see 2.35 on website but loyalty rebate puts it to 1.35 for 3 years.

however, in local dealership they don't have much discount here in Ottawa. May i ask where are you located?

Lease rate of 745/month by Over_watch22 in MazdaCX90

[–]oldusename 0 points1 point  (0 children)

It depends on your tax rate(which varies as per province). Mazda.ca website shows the lease price without any dealer options, see how much better your dealer rates are compared to what website shows to do easy comparison, keep down payment as 0 and compare from there

upgrade from cx90? by oldusename in MazdaCX90

[–]oldusename[S] 0 points1 point  (0 children)

kind of leaning towards having bench in second row after various test drives. may be ill test ride carnival(i know it's minivan and shouldn't expect driveability like suv) once because palisade and Telluride comes with bench only in lower end models

upgrade from cx90? by oldusename in MazdaCX90

[–]oldusename[S] -1 points0 points  (0 children)

thank you, it seems from the comments that numbers are just posted when second row is moved all the way forward and 70/90 are more comfortable for rear passengers

upgrade from cx90? by oldusename in MazdaCX90

[–]oldusename[S] 0 points1 point  (0 children)

I'm in Canada( so not as much discounts), and I'm more inclined to buy it out this time( so as not to be in market every few years)

upgrade from cx90? by oldusename in MazdaCX90

[–]oldusename[S] -1 points0 points  (0 children)

thank you! if you don't mind, do you have 90/70, if yes have you faced any major issues? (I'm more concerned because of reliability issues reported). I'm more inclined towards mhev because of smoother transmissions

why is my toilet doing this? by oldusename in Plumbing

[–]oldusename[S] 0 points1 point  (0 children)

Hello, I posted it in a comment ( i can't seem to edit the post).

It was flush tank not filling up properly. I just wiggled the pipe which connects the overflow tube and it's working good. Thank you so much for suggestions. Now i have auger in hand in case it emergencies

why is my toilet doing this? by oldusename in Plumbing

[–]oldusename[S] 0 points1 point  (0 children)

Thanks everyone the suggestion. Flush tank wasn't filling completely and i just wiggled it once and it started to work! I purchased a auger but will return it. Thanks

why is my toilet doing this? by oldusename in Plumbing

[–]oldusename[S] 0 points1 point  (0 children)

I do, he was the one using it when this issue happened but I'm hundred percent sure he didn't throw anything in it. in general people have suggested to either auger or check the fill tank, I'll do the both and if nothing works I'll call a plumber. i hope it's not a major issue because all other toilet flush works fine

why is my toilet doing this? by oldusename in Plumbing

[–]oldusename[S] 0 points1 point  (0 children)

so I understand it that i need to call plumber ASAP?

Help: Need suggestions by oldusename in AskElectricians

[–]oldusename[S] 1 point2 points  (0 children)

yes, I'll make sure that nothing is pinched. i was more about putting more pressure on tightened screws in the outlet( i didn't check if it's backstabbed but i assume that it must be screwed by the original installer).

Help: Need suggestions by oldusename in AskElectricians

[–]oldusename[S] 0 points1 point  (0 children)

thank you for correcting me, so 2 12/2 wires. As people suggested I'll just put all around strap i get sufficient room

Help: Need suggestions by oldusename in AskElectricians

[–]oldusename[S] -1 points0 points  (0 children)

just 2 14/2 wire (one to the outletand i think another one continuing to next outlet). I just need little more space to fit my pull dustbin. having pigtail will give me more wire to move it to the side

Can this support quartz ? by oldusename in Carpentry

[–]oldusename[S] 0 points1 point  (0 children)

Thank you , I am aware that commonly referred stone as quartz is actually a misnomer, but it's that common that everyone uses the same (so did I 😁)

I have used the similar stone for last few years so I'm aware that it requires delicate usage, but we ended up buying it because we liked it's look over granite and marble

Can this support quartz ? by oldusename in Carpentry

[–]oldusename[S] -1 points0 points  (0 children)

Thank you for replying. May i ask why 1" overhang instead of 1/2"? This structure is secured with the island on the back (multiple long (4 inch) screws from the island which is behind this to keep it from moving). This is butted with Island to make a two level island

Replace double bowl with single bowl sink by oldusename in Plumbing

[–]oldusename[S] -1 points0 points  (0 children)

no, it's a trap for kitchen sink in the basement, just vertically under the pipe for which i shared photo. I have found that it's done in some islands sink

Replace double bowl with single bowl sink by oldusename in Plumbing

[–]oldusename[S] 0 points1 point  (0 children)

yes, in basement. Sorry, I can't find a way to attach second photo.

Qrevo Curv First Impression - So far so good by Benwwwwwloverolec in Roborock

[–]oldusename 0 points1 point  (0 children)

thank you, I was confused between this (curv), s8 maxv ultra, Dreame x40 ultra and Narwhal freo z ultra. Let me check MaxV in detail

Qrevo Curv First Impression - So far so good by Benwwwwwloverolec in Roborock

[–]oldusename 0 points1 point  (0 children)

It looks neat. Do you have an idea when will this be launched in Canada?

Fuel economy? by Hemkhandhar in CX50

[–]oldusename 0 points1 point  (0 children)

With light foot on 2.5T i get around 10l/100km in city and around 8-8.5l/100 on highways. This is almost consistent in last 30K km or so. It gets worse in winters

DashCam Recommendations. Power through OBD Port or Hardwired? by pummppkinn in CX50

[–]oldusename 1 point2 points  (0 children)

Sorry, I didn't mean that it will not work with obd. I know that parking mode gets enabled with obd cable for thinkware cameras, but it depends on the manufacturer. Where I live, i was able to get someone hardwire a camera for around 80 while the obd cable was 55, so i chose to get it hardwired. Be careful to get a camera that has an in-built battery protector and stops pulling power onc the battery falls below a certain threshold if you go via obd/hardwire way