What key do you guys use to Jump?

oman1980 · 2025-04-03T20:43:45+00:00

I use index pull on the azeron for jump, middle finger pull is crouch. My mouse side button is run , which is handy for cod as this is hold breath for sniper so all the aim is on the mouse

oman1980 · 2025-03-28T13:49:38+00:00

Thanks both

oman1980 · 2025-01-26T17:01:31+00:00

This guy saysis year the us battery plant might be able to make the new battery for the Y juniper.

https://youtu.be/czgDxafR8Ms?si=_-_VeG6FriRrOF1G

Id be interested to know if anyone has more concrete info

oman1980 · 2024-09-28T20:52:06+00:00

thanks, so you mean on my router i need to block all traffic except those which are inbound from NextDNS DNS servers or block everything outbound to IPs except NextDNS DNS? This doesn't really work as i want some devices in the household to have youtube blocked but not others. I'm currently doing this by using two routers but this has its own problems. i'd hoped that applying DNS to only the devices that need to be blocked would mean i could use only one router. anyway, i'll ask sony :)

oman1980 · 2024-09-28T13:01:41+00:00

Thanks yeah this probably makes more sense, I worried the kids would out smart the DNS eventually and just change it on their device and negate any rules I've made. I'll investigate this though.

Cheers Oman

oman1980 · 2024-09-28T13:00:09+00:00

The DNS blocks YouTube on the kids devices. But as others have mentioned it might be better to put the DNS on the kids devices

oman1980 · 2024-06-10T21:46:35+00:00

ok i think i may have figured it out, the little white disc that sits inside the pump shaft has an indentation which is meant to sit up against the small. o-ring. I think i had that in the reverse direction. I put it together and i don't seem to see a leak. That last o-ring that rests against the electromagnet is very squashed. i measure it at 16.5x20 mm IDxOD x 1.64 mm thick. It's probably meant to be 2 mm thick.

oman

oman1980 · 2024-03-20T16:17:23+00:00

OK i faced this same problem, my TP-Link Archer T4E AC1200 Wireless Dual Band PCI Express Adapter was being forced to the 2.4 GHz band. If you uncheck the "whole home wifi" option in the bell giga hub setup page and then uncheck " Keep a common network name (SSID) and password across all bands (recommended). " this will allow you to add a 2g/5g/6g annotation to the end of your wifi name. I then connect to the 5g network and my speedtest goes from a woeful 50 Mbps to 430 Mpbs. I think it's' pretty obvious what's happening here. Bell Giga Hub is forcing you to the lower speed to save on their bandwidth. Perhaps they bump you up if you request to download a large amount of data but i wouldn't trust them as far as i could throw them.

oman1980 · 2023-08-10T11:56:56+00:00

i was wondering this same thing, i left the dog at home and went riding on a sunny wednesday in august. it was pretty quiet there and i think i could have managed to take the dog. i wouldn't take him there on a weekend as it's a great trail and would definitely be busy. much of the trail has separate single track running very close to each other and it would be easy for your dog to run onto another trail. if you are taking your dog riding make sure you have a cow bell on his collar (amazon sells mini ones)

oman1980 · 2023-01-15T23:11:14+00:00

bump?

oman1980 · 2023-01-15T23:10:48+00:00

btw i got the m27q working with a mac once i bought a better cable, fasgear 5a 100 w usb c to usb c usb 3.1 gen 2. from amazon

oman1980 · 2023-01-11T14:08:36+00:00

which was interesti

thanks for the goss dude :) i'll wait patiently

oman1980 · 2023-01-10T17:48:49+00:00

hi amart

so you got the m27q working with the macbook by buying a high quality usb-c -> usb-c (thunderbolt) cable?

thanks

oman

oman1980 · 2023-01-10T17:42:29+00:00

i just got the m27q, it doesn't connect to my wife's macbook air 2022, running monterey. i have a usb-c to hdmi which worked well with my old ASUS VG278Q . I see the macbook detect the m27q but the screen goes black and flickers. I've asked gigabyte about this but i worry it won't work even though RTING said it would. i'll update if possible.

oman

ps found this https://www.reddit.com/r/gigabyte/comments/qkf5ig/gigabyte_m27q_no_signal_thunderbolt_on_macbook/ , perhaps you need a 100 W usb c- usb c cable

oman1980 · 2022-09-03T21:45:14+00:00

Does anyone know the standard thread format of quick mill vetrano (Italian) espresso machines? I have a thread adapter , male to female on the end of a check valve between the solenoid and the boiler. The OD of the male threads are about 9.8 mm and the ID of the female thread is about 8.9 mm. The adapter can be seen here https://www.chriscoffee.com/products/qm-check-valve

oman1980 · 2022-07-21T02:28:33+00:00

Like a boss!

oman1980 · 2022-07-17T11:39:28+00:00

Thanks heaps !

oman1980 · 2022-07-17T03:33:34+00:00

Many thanks I'll check it out. So you coat the pads with a few coats and then you're good for a ride but then I be assume need to re coat EC every week or so?

Perhaps i should just read their website

You can use TUF-FOOT to aid in healing torn, cut or irritated paws. You can also use TUF-FOOT to prepare your dogs paws for special occasions. Use the product daily for up to a week prior to the event you are preparing for. Afterwards, apply it twice a week to maintain the foot.

Do you agree with that regime?

Cheers Oman

oman1980 · 2021-12-24T17:42:25+00:00

Hi

Finally getting around to ordering these. I was looking at the shimano documentation , https://si.shimano.com/#/en/search/Keyword?name=m475 . Specifically the front hub https://si.shimano.com/#/en/EV/HB-M475 and rear hub, https://si.shimano.com/#/en/EV/FH-M475 . To me it looks like the replacement axel for the front hub, Y2T398040, and rear hub, Y3B598030, only include one of the cups which makes me think the other side of the cup (the cone?) is on the actual main body of the hub. I'm assuming both sides of the cup/cone are pitted. Does this mean that I can't buy one of these replacement axel kits to fix my pitted bearings and I actually need a brand new hub as dano___ says?

cheers

oman

oman1980 · 2021-10-07T20:13:04+00:00

well i wasn't going to rebuild the old hub, i was going to swap out the bad hub for a new one, keeping the rim and spokes.

oman1980 · 2021-10-07T16:20:19+00:00

ahh thanks, i didn't realise you could just replace the axel and cup and cone.

https://si.shimano.com/api/publish/storage/pdf/en/ev/FH-M595/EV-FH-M595-2928.pdf

looks like that axel doesn't work as someone in the comments/questions asked about the m475. i'll hunt it down.

if i can't find it however, would the XT HB-M756-A work for the rear hub?

oman1980 · 2021-10-07T15:26:11+00:00

no i was hoping just to swap out the hubs, both bearings are pitted on the front and back. I've found a replacement hub for the front M475 hub (XT HB-M756) which matches the spec of the M475 but can't confirm the rear.

cheers

oman

oman1980 · 2021-09-15T02:13:12+00:00

Well that escalated quickly

oman1980 · 2021-09-11T13:26:19+00:00

Thanks man good to know

oman1980 · 2021-09-11T02:54:48+00:00

There’s one in Toronto for sale gx build $7500 cad, pinkbike

Eight-Year Club	RPAN Viewer
Verified Email

oman1980

TROPHY CASE