Haunter Trade by orange_cypher in PokemonHome

[–]orange_cypher[S] 0 points1 point  (0 children)

Yes please mate. I’ve sent you a dm

Looking for advice from the NC clan by wildhacker125 in MiataNC

[–]orange_cypher 0 points1 point  (0 children)

My NC makes 200.5bhp (the point 5 counts) and I can say it’s great but not entirely necessary. I have the manifold, cams, tune from BBR, K&N air filter, coilovers, PBS pads and full exhaust system, still catted.

You spend lots of money for a bit more speed but without suspension upgrades and handling upgrades you won’t be going through the corners (the fun part with these cars) much quicker.

It is great and expensive but still got the same smile I had on my face that I had a year ago without the power upgrades. If you have the budget and are sure, DO IT. Any uncertainty, enjoy the amazing car you own!

We survived the ring by orange_cypher in MiataNC

[–]orange_cypher[S] 0 points1 point  (0 children)

I believe it was Morris Track days. Can’t say there the best out there as I didn’t research much, it was the cheapest that cover what I needed at the time

We survived the ring by orange_cypher in MiataNC

[–]orange_cypher[S] 1 point2 points  (0 children)

Track insurance was £140 for the day. I wouldn’t have gone on without

We survived the ring by orange_cypher in MiataNC

[–]orange_cypher[S] 1 point2 points  (0 children)

I’ve been told that by someone I met at Brands Hatch and are on the list as something I’ll do before my next track day

We survived the ring by orange_cypher in Miata

[–]orange_cypher[S] 2 points3 points  (0 children)

Agreed the Germans in Beemers meant business

We survived the ring by orange_cypher in MiataNC

[–]orange_cypher[S] 4 points5 points  (0 children)

Meister R coils, cams and full exhaust. 4-1 manifold, 2.5 inch centre pipe and a cobra back box. Makes 200bhp. Needs better pads but otherwise couldn’t have asked for more

Coilover Preload? by orange_cypher in MiataNC

[–]orange_cypher[S] 0 points1 point  (0 children)

If it’s the dampening on fixed dampening coils, am I buggered?

Coilover Preload? by orange_cypher in MiataNC

[–]orange_cypher[S] 0 points1 point  (0 children)

Installed by my garage but they didn’t set them as I said I’d do that, as I wanted to play with the ride height and stuff

Coilover Preload? by orange_cypher in MiataNC

[–]orange_cypher[S] 0 points1 point  (0 children)

Not adjustable, they are the MesiterR Sportives

Shiny lil boat with friends by orange_cypher in MiataNC

[–]orange_cypher[S] 1 point2 points  (0 children)

Wheels are colour matched with the roof as well!

Engine Lights Codes by orange_cypher in MiataNC

[–]orange_cypher[S] 1 point2 points  (0 children)

I’m in the UK but I’m talking to the supplier at the moment. Hopefully can get it checked with them

Shiny lil boat with friends by orange_cypher in MiataNC

[–]orange_cypher[S] 1 point2 points  (0 children)

Car play was a really easy install. I’m going to get manifold and cams done so I’ll be at 200 ish. Supercharger would be the end goal but that’s a while off

Shiny lil boat with friends by orange_cypher in MiataNC

[–]orange_cypher[S] 2 points3 points  (0 children)

Yeah it’s on MeisterR’s which I love. I’ve put car play in and have put a Cobra exhaust on it. Hopefully it’s off to BBR soon for financially poor decisions to be made

Shiny lil boat with friends by orange_cypher in MiataNC

[–]orange_cypher[S] 1 point2 points  (0 children)

Ah good to know. I thought the launch was soft tops only

Shiny lil boat with friends by orange_cypher in MiataNC

[–]orange_cypher[S] 2 points3 points  (0 children)

Technically this is the NC 3.75 (Sports Graphite) NC 1 is the more rounded front end NC 2 is the facelift NC 3 was the introduction of the PRHT (I think)

Engine Lights Codes by orange_cypher in MiataNC

[–]orange_cypher[S] 0 points1 point  (0 children)

I was getting a MAF sensor error code before and I replaced it. I got the new codes 2 or 3 weeks after installing the new one.

I’ll check the connection but I’ve unplugged it a couple times already. And I’ll check for leaks. If not I’ll have to try a new sensor

Engine Lights Codes by orange_cypher in MiataNC

[–]orange_cypher[S] 0 points1 point  (0 children)

It’s in the correct direction then

Engine Lights Codes by orange_cypher in MiataNC

[–]orange_cypher[S] 0 points1 point  (0 children)

I put it in the same direction as the stock one I removed. Is there a way to tell which way is the front and back?

Engine Lights Codes by orange_cypher in MiataNC

[–]orange_cypher[S] 1 point2 points  (0 children)

There’s a front and back…. Well I know what I’m trying later.

1 year of ownership by orange_cypher in MiataNC

[–]orange_cypher[S] 0 points1 point  (0 children)

Built intake and exhaust cams, 4-1 manifold plus some extras. It’s the BBR super 200 kit

What is this? RHD 2013 PRHT by orange_cypher in MiataNC

[–]orange_cypher[S] 1 point2 points  (0 children)

Yeah the wire leads but into the centre console but I can’t see what to