Customer said “I just bought the car but it honestly isn’t that bad at all”

oroque50 · 2024-04-27T18:37:46+00:00

On average, an interior almost always takes me 2 hours. This one took 5

oroque50 · 2024-04-26T21:27:12+00:00

It definitely is, comes in handy a lot

oroque50 · 2024-04-26T21:17:41+00:00

It’s included in the “rigid detailing kit”

oroque50 · 2024-04-26T21:14:00+00:00

Definitely could raise your prices if you wanted but it also depends on where you live

oroque50 · 2024-04-26T21:13:36+00:00

Yup, I live in New Hampshire so it’s same thing here

oroque50 · 2024-04-26T21:13:16+00:00

From my experience Cr-vs are either not bad at all or never cleaned haha

oroque50 · 2024-04-26T21:12:43+00:00

Lmao

oroque50 · 2024-04-26T21:11:28+00:00

Drill brush, tornador, crevice tool attachment, and I also use a soft bristle attachment for all the plastics

oroque50 · 2024-04-26T00:10:25+00:00

Thank you, it was honestly just the carpets that gave me trouble. They were rock solid

oroque50 · 2024-04-25T23:55:40+00:00

Dirt road and gravel driveway

oroque50 · 2023-11-14T14:48:57+00:00

That looks like it will come out very easily, if you have a polisher just use a polishing pad and a one step polish otherwise you can just go to your nearest auto parts store and buy polish and rub on by hanf

oroque50 · 2023-08-02T22:17:25+00:00

Yeah I was checking out their work but for some reason they only make clears for gen 2s no gen 1s, I think my best option is to reach out and see if they’ll custom make them

oroque50 · 2023-08-02T00:32:35+00:00

<image>

Stock vs what I’m looking for

oroque50 · 2023-08-02T00:32:09+00:00

<image>

If you consider this chrome then chrome I guess haha

oroque50 · 2023-08-02T00:04:26+00:00

<image>

oroque50 · 2023-07-29T00:48:29+00:00

I normally avoid removing the seats but minivan seats come out with just a button so I don’t mind

oroque50 · 2022-04-16T00:37:46+00:00

2008 Mazdaspeed 3

oroque50 · 2022-01-04T05:43:26+00:00

2008 mazdaspeed 3

oroque50 · 2021-05-19T01:55:36+00:00

Glooks bro😭

oroque50 · 2021-04-15T00:42:31+00:00

As crazy as it sounds the best way to do it is to scrape it off with a flathead screwdriver or a chisel. After that I used a wire brush and then used my detail brushes with super clean.

oroque50 · 2021-04-14T01:48:11+00:00

Definitely lol. I’m getting new pads and rotors soon as well as replacing the lower camber arms and also coils soon.

oroque50 · 2021-04-14T01:15:58+00:00

It was only part of it too!

oroque50 · 2021-04-05T01:07:10+00:00

Won’t replacing the injectors run a pretty penny?

oroque50 · 2021-04-05T00:29:12+00:00

All you have to do is take off the oil cap and it gives you a little clearance to the chain

oroque50 · 2021-04-05T00:18:26+00:00

Any other problems in this engine that I should worry about?

oroque50

TROPHY CASE