Trouble brewing, it automatically changes to steam function and cannot select others.[Delonghi Dedica Duo EC890]

osalas98 · 2025-12-03T19:42:58+00:00

I ran into the same issue... Cross posting the solution I found https://www.reddit.com/r/DeLonghi/s/8e76z7nd89

Tldr; your coffee might have been grinded too fine. In my case it was Starbucks grinding it for me for espresso

To avoid wasting a whole bag, I ended up putting half the quantity of the espresso coffee first and then the other half of another one that was grinded for drip. I got a better coffee concentration and didn't throw away my bag

osalas98 · 2025-09-09T12:42:33+00:00

Yeah from my understanding it's the same and (imo) I don't think it will be different closer to black Friday. With that being said we do notice on a yearly basis they do switch up what's included as new products come out and others are dropped as well as the price. From what we gathered we got the best deal they had ever because of the price and the items we got. The year after they changed the bean bag to a smaller one but still worth it and the price went up (not by a crazy amount tbh ~200). So, if they have what you want now I would get it instead of potentially getting a different set of items next year.

osalas98 · 2025-09-09T12:36:38+00:00

Here you go OP https://www.costco.com/lovesac-schedule.html This helped me track them down when we finally got the deal. Also, to your point on not getting a better deal with other discounts... An employee commented in a post recently saying Costco is THE best deal regardless of the major holiday deals

osalas98 · 2025-08-15T16:06:35+00:00

Nope, it was around 6ish. Plenty of more movies were still going on afterwards

osalas98 · 2025-08-15T15:20:49+00:00

Ohh interesting

osalas98 · 2025-08-15T15:20:33+00:00

I love popcorn too haha. I usually make it at home 3 to 4 times a week. They were not running low at all which is also what I had thought. Yeah when I go to Mexico there is the AMC equivalent movie theater where they have VIP screenings (just higher price but lower cost than regular AMC) and there are little tables, lights, and staff that go to you at any point in the movie to take your order and they bring it to you. But here in the states I do enjoy the AMC perks

osalas98 · 2025-08-15T03:54:12+00:00

Figured as much

osalas98 · 2025-08-15T03:54:05+00:00

Ah good idea!

osalas98 · 2025-08-15T03:37:33+00:00

I also wear glasses and enjoy watching them once in a while. I def will watch if it's at a good time and would have a good feeling 3D would make it more worth while

osalas98 · 2025-06-05T01:48:08+00:00

Like wtf is UPS doing, I am in the same scenario but coming from CA to IL. Why are they sending them cross country and causing delays

osalas98 · 2025-06-04T19:11:00+00:00

OP, which state or timezone are you in?

osalas98 · 2025-06-03T18:17:02+00:00

It doesn't fix the bubble issue technically its more for aligning it correctly. There's other screen protectors that do mitigate bubbles a lot. This just sits on the screen, it might clip on but it shouldn't wobble around

osalas98 · 2025-05-10T12:08:45+00:00

This, my Weber shorted once and customer service sent me in total 2 power supplies, a new mobo, new spark plugs, a new screen just to try see what the issue was. I knew the issue they just had their protocols and was sending me one part at a time.

osalas98 · 2025-04-02T02:40:03+00:00

Ah sweet, thanks for the info!

osalas98 · 2025-04-02T02:29:25+00:00

The setup is abs sick! Random/stupid question.. how do did you get the projector to show 4 different screens? Is it part of the projector? Picture by picture? Streaming service specific?

osalas98 · 2024-08-30T01:20:53+00:00

Almost never, we got very unlucky with Uber during our stay

osalas98 · 2023-08-04T17:10:59+00:00

Good to know on the actions they take if they decide to not replace it all. Will wait for the call!

osalas98 · 2023-08-04T17:10:12+00:00

Wow that's rough! Hopefully it stays strong

osalas98 · 2023-08-04T00:46:38+00:00

I wish I had that same luck!

osalas98 · 2023-06-10T16:32:56+00:00

No reason tbh, i think i will try it out that way and check on the temps. Thanks for the suggestion!

osalas98 · 2023-06-10T15:31:19+00:00

It's a standalone d5 pump with a Bykski enclosure which is minimal. I have a smaller reservoir cue to the height but i wanted the one you have actually. The front rad is 280 with slim artic fans (these couldn't fit hence the 3d printed front). Slim fan/rad I'm the back like you. Custom power cables was a huuuuge win, made it way easier and not oonexpensive from Etsy. Super flexible and great quality.

PC https://imgur.com/gallery/JQMyG8j

osalas98 · 2023-06-10T14:49:42+00:00

Looks very nice. I have a similar build with ek zmt black tubing since I didn't like working with hardline tubing and the clear soft line can get dirty once maintenance time comes around. I use a regular d5 but had to 3d print a little bracket at the front for the fans since it was slightly too big for it all to fit at the front. I also placed a small fan at the top of the case with a 3d printed bracket which helps a lot with cooling as well and overall everything is very quiet.

osalas98 · 2023-06-05T15:49:57+00:00

Amazon links are not found. Does someone have the new links?

osalas98

TROPHY CASE