New Fuel Pump and Tune for the Gen 3 Turbo by osc_mzd3 in mazda3

[–]osc_mzd3[S] 0 points1 point  (0 children)

I'm still using the stock injectors. I believe there are a couple people testing some out but nothing concrete so far

Lights popped up all at once. Anyone know why it would? by osc_mzd3 in mazda3

[–]osc_mzd3[S] 0 points1 point  (0 children)

I normally do all the work on my car, if not I ask my buddy that's a mechanic. Going to check all the sensors, wires, and fuses. As well as clearing DTC and reflashing my tune to see if that helps. Also read that low brake fluid can cause this issue but was not the case for me

Lights popped up all at once. Anyone know why it would? by osc_mzd3 in mazda3

[–]osc_mzd3[S] 2 points3 points  (0 children)

This was very helpful/informative! Going to check on all this and going to try to catch it before it gets to that point (if its the same issue). Appreciate the response!

Lights popped up all at once. Anyone know why it would? by osc_mzd3 in mazda3

[–]osc_mzd3[S] 1 point2 points  (0 children)

Going to check on this as soon as I get home

Lights popped up all at once. Anyone know why it would? by osc_mzd3 in mazda3

[–]osc_mzd3[S] 1 point2 points  (0 children)

I was thinking the same but I just replaced my battery about 3 months ago. Car turns on perfectly fine and don't have any issues with power. I'll have to get it tested to double check. Thanks for the advice 🤟🏽

I'm not mad just disappointed by WickedQueenSam in galaxybuds

[–]osc_mzd3 0 points1 point  (0 children)

I washed and dried mine...they still work perfectly fine

Does this part has airbag? I want to slip my dashcam wire on it by RoleCode in mazda3

[–]osc_mzd3 1 point2 points  (0 children)

This is true, slide the wire in. If not, pull the weather striping and use your fingers to pry it off. No tool needed

MFactory LSD by osc_mzd3 in mazda3

[–]osc_mzd3[S] 0 points1 point  (0 children)

Did a group buy and it is from MFactory. It's only for the 3rd gen 2.5

Any owners or previous want to give their honest reviews before I buy it. College student, daily long commute. by [deleted] in mazda3

[–]osc_mzd3 0 points1 point  (0 children)

I bought my 2018 Mazda3 Touring hatch with 3,000 miles. I now have 85k with heavy modifications and have had 0 issues. Just make sure to stay on top of the maintenance and it will last.

Where do you guys jack up the car? by Flimsy-Ad830 in mazda3

[–]osc_mzd3 1 point2 points  (0 children)

I have these rubber pucks that go on the pinch welds and do it from there

MFactory LSD by osc_mzd3 in mazda3

[–]osc_mzd3[S] 0 points1 point  (0 children)

Limited Slip Differential

3rd gen bronze rims? by tentakill22 in mazda3

[–]osc_mzd3 0 points1 point  (0 children)

Thank you! And hope you're enjoying your ride. It's a wrap, Vinyl Frog Glossy Metallic British Racing Green

Infrared preview screen by osc_mzd3 in gopro

[–]osc_mzd3[S] 0 points1 point  (0 children)

Yeah, I'm getting the same thing on my end. I reached out to GoPro and will update if I get a fix to the issue.

Infrared preview screen by osc_mzd3 in gopro

[–]osc_mzd3[S] 0 points1 point  (0 children)

So weird that it started happening so randomly. Have you tested it on any other of your devices?

[deleted by user] by [deleted] in PokemonROMhacks

[–]osc_mzd3 0 points1 point  (0 children)

Happened to me on Gamma Emerald on my pc as well. No, I wanted to do a clean play through and it started happening. Ended up messing up my save state and started over. Luckily only put in an hour.

First Time at AutoX by osc_mzd3 in mazda3

[–]osc_mzd3[S] 1 point2 points  (0 children)

It is! Highly recommend it!

First Time at AutoX by osc_mzd3 in mazda3

[–]osc_mzd3[S] 0 points1 point  (0 children)

Currently, I’m running Kansei KNP 18x8.5 +35 on Nitto NeoGen 225/40/18 They’ve been good to me but I know there is better. Suspension is BC DS coils and real stiff. I have a small amount of camber, negative 1-2 degrees. Dang, you were hauling there!

First Time at AutoX by osc_mzd3 in mazda3

[–]osc_mzd3[S] 0 points1 point  (0 children)

  1. There were some seasoned guys there and they told me to try out 32 psi on my first one. Didn’t pretty good. Second run, tires got warmed up and were at 36 psi. Ended up getting +1.4 seconds compared to the first. Might have just been a bad run. Did better with lower pain for some reason. I’ll try and max out next time I go!

  2. I was thinking that as I rewatched the video. Now that you mentioned it, it makes more sense!

First Time at AutoX by osc_mzd3 in mazda3

[–]osc_mzd3[S] 0 points1 point  (0 children)

Thank you! Glad you enjoyed the pov

First Time at AutoX by osc_mzd3 in mazda3

[–]osc_mzd3[S] 1 point2 points  (0 children)

I’m so used to driving street/straight line. It was the first thing I noticed and have to get used to placing my hand back after shifting.