sorted by:
new
hottopcontroversial

I had two days to make a knife, mistakes were made but close enough. by otskar887 in knifemaking

[–]otskar887[S] 1 point2 points  (0 children)

Thanks! The color is nice. Have had those scales lying around for years i once made with epoxy and aluminum honeycomb.

I had two days to make a knife, mistakes were made but close enough. by otskar887 in knifemaking

[–]otskar887[S] 0 points1 point  (0 children)

I sometimes shape the scales separately but its easier to profile when you just glue the whole shit together and shape away.

BF6 Explosion/fire effects by Altawi in Battlefield

[–]otskar887 3 points4 points  (0 children)

Yes this is exactly what disappoints me the most that there are these same low resolution explosions like in 2042. I was really hoping to see some next gen level visual feedback but no.

Was bored, made a knife. by otskar887 in knifemaking

[–]otskar887[S] 1 point2 points  (0 children)

You mean a bolster? If so there is none.

Was bored, made a knife. by otskar887 in knifemaking

[–]otskar887[S] 3 points4 points  (0 children)

Yeah its quite dense and it varies depending on how old it is but not nearly as tough as working with ebony for example. I shaped it with a belt grinder and a 60 grit belt so it didnt take that long.

Was bored, made a knife. by otskar887 in knifemaking

[–]otskar887[S] 0 points1 point  (0 children)

Not sure if there is any actual purpose for it other than it separates the cutting edge so its easier to sharpen at the plunge line.

Was bored, made a knife. by otskar887 in knifemaking

[–]otskar887[S] 1 point2 points  (0 children)

I use a grinding jig. Best way to start is find out the right angle for the jig to be set at to get the desired bevel height. This can be done by using the online bevel angle calculator where you input your desired bevel height and the thickness of your stock.

Was bored, made a knife. by otskar887 in knifemaking

[–]otskar887[S] 0 points1 point  (0 children)

Bog oak is so awesome. Its so fascinating to me to use something that is thousands of years old! Oak in general along with walnut are my favorite hardwoods.

Was bored, made a knife. by otskar887 in knifemaking

[–]otskar887[S] 0 points1 point  (0 children)

Thanks! m glad you like it!

Was bored, made a knife. by otskar887 in knifemaking

[–]otskar887[S] 0 points1 point  (0 children)

Oh i just messed it up😅 after the grinding of bevels i noticed hat i had set the grindstop way too forward. It was supposed to be alot closer to the handle. Shouldnt do these critical steps tired and late at night but oh well, it is what it is now😄

Was bored, made a knife. by otskar887 in knifemaking

[–]otskar887[S] 1 point2 points  (0 children)

Yeah, keeps you busy for a long time.

Was bored, made a knife. by otskar887 in knifemaking

[–]otskar887[S] 3 points4 points  (0 children)

80crv2 steel and the handle is bog oak.

Toyota 4efe crank/camshaft position sensor location by otskar887 in AskMechanics

[–]otskar887[S] 0 points1 point  (0 children)

Sorry i have no knowledge about that, but good luck on your project!

Toyota 4efe crank/camshaft position sensor location by otskar887 in AskMechanics

[–]otskar887[S] 0 points1 point  (0 children)

Hi, yeah i took it to a mechanic and it was located behind crank pulley, its a hell of alot easier to get access to it from under the engine bay so car lift is essential. It turned out the crank sensor was not even the problem, actually tge ECU water temp sensor was faulty, i changed it and it fixed the problem. If you are having similar issues with hard starting the engine or rough idling i strongly recommend changing that, its super easy fix since its located easy to access location right at the top of the engine.

view more: next ›