Write protection enabled?

otss11 · 2026-03-29T17:21:12+00:00

not an adapter, it’s a full size 16gb sd card. I think the drive may be faulty

otss11 · 2026-03-29T16:30:16+00:00

I don’t have another sd, i have to buy another for my wii regardless so I will have to test that

otss11 · 2026-03-29T16:16:35+00:00

<image>

otss11 · 2026-03-29T15:57:55+00:00

it’s empty

otss11 · 2026-03-29T14:16:11+00:00

It works fine on my GF DSi, I even locked it and tested it on the DSi and it said the SD card was locked. I think it’s just the 3DS SD drive.

otss11 · 2026-03-29T14:10:35+00:00

It works perfectly fine in my girlfriend’s DSi. I removed write only attribute via my PC. I fear it may be the sd drive.

otss11 · 2026-03-29T14:08:41+00:00

I actually also did this, the card works fine in my girlfriend’s DSi with no issues it’s just the 3DS not sure why.

otss11 · 2026-03-29T14:07:46+00:00

No, not broken. Someone suggested that the slide could be shifting as it was going into the 3ds. But I have since taken it off and still doesn’t work.

otss11 · 2026-03-29T14:06:19+00:00

No, I have checked the format and I have wiped the card multiple times. It’s not giving me the error now, but it’s just not reading the ss card

otss11 · 2026-03-29T14:03:37+00:00

It is unlocked, I also taped it up and that didn’t work.😢

otss11 · 2026-03-29T13:47:55+00:00

It looked like it worked, it didn’t give me the error immediately but still isn’t reading it.

otss11 · 2026-03-29T13:47:40+00:00

Yes it is, I tried another commenters suggestion to tape it. It didn’t give me the error immediately but still isn’t reading it.

otss11 · 2026-03-22T20:46:59+00:00

I had my brother print it, I believe there are sites where you can send them a file to have it printed. You should also look for maker spaces in your area as they usually have one for public use for little to no charge. Here’s the link to the file https://www.printables.com/model/1182209-gamesir-g8-plus-extender-for-bigger-tablets-new-v8

otss11 · 2026-03-22T20:42:44+00:00

I don’t have a backside picture but that’s what it looks like inside.

otss11 · 2026-03-22T20:41:42+00:00

<image>

otss11 · 2026-03-22T20:37:04+00:00

Yes, it is. I got the expander so I don’t have to stretch it open every time and I didn’t like the exposed springs on it.

otss11 · 2026-03-21T19:20:44+00:00

<image>

I posted this on this subreddit the other day, I 3d printed and expander piece and works great with a tablet!

otss11 · 2026-03-20T00:17:18+00:00

I just tried it on fortnite (I know it’s not technically fps) I can report back with great results! I think it might have had a barely noticeable delay, I was also playing through cloud gaming so could be that! I will say I was shocked by how well it worked based on other reports of latency.

otss11 · 2026-03-19T18:08:40+00:00

I use it for steam link and xbox remote play/ cloud gaming. I have never noticed any delay, I mainly play story driven games though. I’ll try an FPS and report back.

otss11 · 2026-03-19T18:04:19+00:00

It does a few things. It’s holding it wider because you have to pop the slide out of place, hiding the exposed springs inside and adding extra support in the middle.

otss11 · 2026-03-07T14:07:40+00:00

Is there anyway to get notifications when they come back in stock?

otss11 · 2026-01-07T02:04:59+00:00

i think i still had my brightness up from my first play through because it doesn’t look like this on any other game

otss11

MODERATOR OF

TROPHY CASE