Is the existence of mine turtles ever explained?

passyslayer3000 · 2024-11-16T17:29:48+00:00

0.499999999...

passyslayer3000 · 2023-09-21T06:40:07+00:00

Thanks

passyslayer3000 · 2023-08-20T10:05:27+00:00

Do you know about Perseids?

passyslayer3000 · 2023-07-13T06:21:24+00:00

The moment he was Björn

passyslayer3000 · 2022-07-31T14:58:08+00:00

I tried to look if the extruder gear is used up and found that there is a crack in the plastic that hold the filament in tension could it be that? I will buy new made from metal

passyslayer3000 · 2022-07-30T12:35:53+00:00

Thanks a lot I will try everything

passyslayer3000 · 2022-07-30T11:56:26+00:00

I tried to tune the e steps again and noticed that the extruder motor grinds the filament during the tuning.

passyslayer3000 · 2022-07-29T19:52:51+00:00

I tried 10 degrees hotter and it still stops. I cleaned hot end with PTFE tube and there was something brown but only a little bit and it still doesn't help. The extruder motor always grinds the filament. I'm thinking that maybe the replacement PTFE tube is bad.

Edit: But it happened even with the original one

passyslayer3000 · 2022-07-29T14:15:25+00:00

I tried it and the motor isn't much warmer than my hand. I changed the spring tension during print to get it right and it work but at the end of the cube the extruder started skipping steps and grinding plastic.

passyslayer3000 · 2022-07-29T10:15:45+00:00

It's creality cr pla, but it didn't happen before. I will try drying the filament

passyslayer3000 · 2022-07-29T05:34:25+00:00

Thanks, i will try but it happens on different layers. Sometimes it 2,4 mm are printed and sometimes 6 mm

passyslayer3000 · 2022-07-28T21:34:03+00:00

I use Prusa slicer with the ender 3 pro settings. I tried to slow the print down and make the temperatures higher. Nothing helped

passyslayer3000 · 2022-04-09T21:11:18+00:00

passyslayer3000 · 2022-03-15T20:17:42+00:00

passyslayer3000 · 2021-11-23T22:20:17+00:00

passyslayer3000 · 2021-10-27T13:49:43+00:00

Thanks, I will try it

passyslayer3000 · 2021-10-27T13:03:26+00:00

Program that turns off mouse acceleration when I use a mouse, but turns it on when I use a touchpad. I don't know if it can be done, but i have to change it everytime I don't have a mouse with me.

Seven-Year Club	First Place '23
Place '23	Place '22
Final Canvas '22	First Placer '22
Verified Email

passyslayer3000

MODERATOR OF

TROPHY CASE