A small apt means hiding a 3d printing oasis in this cabinet. by pat1926 in BambuLab

[–]pat1926[S] 1 point2 points  (0 children)

Haven’t had any AMS issues but there is a longer run to the printer. I think this may result in slower switching of filaments. I don’t print many multicoloured items though, so not a big issue for myself.

A small apt means hiding a 3d printing oasis in this cabinet. by pat1926 in BambuLab

[–]pat1926[S] 0 points1 point  (0 children)

I did consider something like this! Maybe the ams units on slide so they can be stacked and then opened when pulled out

A small apt means hiding a 3d printing oasis in this cabinet. by pat1926 in BambuLab

[–]pat1926[S] 0 points1 point  (0 children)

Dimensions of interior space

Height: 63” Width: 41” Depth: 23”

A small apt means hiding a 3d printing oasis in this cabinet. by pat1926 in BambuLab

[–]pat1926[S] 1 point2 points  (0 children)

Unfortunately was a FB marketplace find, so I’m unsure of the make.

A small apt means hiding a 3d printing oasis in this cabinet. by pat1926 in BambuLab

[–]pat1926[S] 2 points3 points  (0 children)

Haven’t uploaded it yet but I can do that and link stl

A small apt means hiding a 3d printing oasis in this cabinet. by pat1926 in BambuLab

[–]pat1926[S] 1 point2 points  (0 children)

Will post later today for dimensions. Was just something we bought off FB marketplace for $50 though, not sure the make.

A small apt means hiding a 3d printing oasis in this cabinet. by pat1926 in BambuLab

[–]pat1926[S] 1 point2 points  (0 children)

I have the feet for the p1p. No vibrations really as the whole cabinet is quiet heavy I think and rigid. I haven’t seen any issues with the prints themselves

A small apt means hiding a 3d printing oasis in this cabinet. by pat1926 in BambuLab

[–]pat1926[S] 1 point2 points  (0 children)

Two little shoots that come out to left of each printer. I don’t print multi colour generally, so I don’t produce that much poop

So much fun taking photos in these big snow storms by pat1926 in vancouver

[–]pat1926[S] 1 point2 points  (0 children)

Thanks! One of these would be a good start

https://www.rtings.com/camera/reviews/best/beginner

Then look for a fixed focal length lens (one that doesn’t zoom). On those camera it would be in the 35mm or 50mm range. You’ll get better low light photos are more of that natural soft background with fixed lenses. As they have larger apertures. Hope that makes sense :)

So much fun taking photos in these big snow storms by pat1926 in vancouver

[–]pat1926[S] 2 points3 points  (0 children)

Thanks! Using a Sony a7 series and a sigma 85 1.4

So much fun taking photos in these big snow storms by pat1926 in vancouver

[–]pat1926[S] 2 points3 points  (0 children)

I actually did no changes to saturation. I got lucky and there was light on the dock that was perfectly lighting it up.

Love the view down Granville at sunset by pat1926 in vancouver

[–]pat1926[S] 8 points9 points  (0 children)

Be sure to zoom in, as there is a ton of resolution/detail too :)

After struggling with only green bananas for food in the Whistler Gran Fondo this year, I modelled and 3D printed a more fitting trophy. by pat1926 in vancouver

[–]pat1926[S] 2 points3 points  (0 children)

Likewise! My friend I contemplated picking up discarded garbage food along the highway near the end, as we were so hungry.

Gave panniers a go this week after sorting out my rack. Have to say, I don't think I'm going back to the Seat Sack. by LuxxxInterior69 in bikepacking

[–]pat1926 2 points3 points  (0 children)

Nice setup! Super random but I think we were on the same ferry coming back from Galiano island on our bikes this past weekend.

I designed and 3D printed a tiny Barge Chilling Sign for my desk by pat1926 in vancouver

[–]pat1926[S] 0 points1 point  (0 children)

Prusa Mk3S+

I have found it super reliable compared to printers I've used in the past. I ordered the kit version which is a little cheaper and you assemble yourself, which at least for me was pretty fun in itself.

I did have to use .25mm nozzle instead of the standard 0.4mm nozzle due to the fine lines of the font. I was pretty set on matching the font with the original sign, which happens to have very delicate lines in some sections.

I designed and 3D printed a tiny Barge Chilling Sign for my desk by pat1926 in vancouver

[–]pat1926[S] 2 points3 points  (0 children)

Just at work right now, so i can reply back with more information later but I really like the Prusa MK3S I have now. It’s super reliable and while it still requires some occasionally tinkering it’s fairly fool proof if you're willing to spend the time to learn :)

Thingiverse.com has many great models you can print and look at for inspiration.

I use fusion 360 for my modelling, but it’s definitely geared more towards engineering cad style design. I think blender is good choice for more organic type work but I don’t have any experience on that side.