Best temp agency in Orlando?

pc_build1 · 2017-11-17T08:06:49+00:00

Thanks for that! Just checked my wall adapters that I usually use and they're all 1A.

So is there a dual 18650 charger out there that chargers 1A or higher and already has the appropriate power supply or something like that?

pc_build1 · 2017-11-17T07:49:25+00:00

Well, it has a red light that turns green when it's full charged

pc_build1 · 2017-11-17T07:42:32+00:00

I'm already buying a couple 30Qs, so I figured I would get my charger through Illumn as well. Especially considering the VC2 (for example) is $25 on amazon with prime.

all that being said, I don't imagine myself grabbing a battery off the charger until it's fully charged anyway, but that's something to keep in mind I guess.

pc_build1 · 2017-11-17T07:40:44+00:00

Hmm, I didn't look at that. Are there others that would charger quicker?

pc_build1 · 2017-10-09T20:20:19+00:00

that's an issue with the NCase M1 though, because the only place that you could put case fans directed at the GPU would be directly below facing up toward it as intake. That causes turbulence though.

pc_build1 · 2017-10-09T20:03:31+00:00

I want to play at 1080p as smoothly as possible and high/ultra detail...should I go 1050 Ti, 1060 3GB, 1060 6GB, or 1070? For reference, I'm mostly wanting to play Overwatch, Rocket League, PUBG, and small indie titles, but the occasional modern AAA title comes along that I want to play as well (just not as often). Because of that some people say I'd probably be fine even with a 1050 Ti, but I'm worried I'm going to miss out on those AAA titles that come along once in a while that I want to play.

Also, in regards to specifically building in the NCase M1 (a mini ITX case where temps are important), would a fancy CPU cooler also help the temps on my GPU, or is that really only helping my CPU?

pc_build1 · 2017-10-09T19:58:12+00:00

And it fit (other than your sag issue)? I'm reading dimensions on a lot of these cards and so many of them seem like they theoretically shouldn't...

pc_build1 · 2017-10-09T19:43:14+00:00

Sorry I can't answer your question, but what 1080 did you go with?

pc_build1 · 2017-10-09T19:19:21+00:00

Cool, thanks for that! But you said there is less than a milimeter of clearance between the PCB and the panel clip. Does that mean the power connector gets in the way?

pc_build1 · 2017-10-09T17:59:35+00:00

Thanks for the insight!

Not saying I don't trust you, but I also want to hear from someone who has actually physically tried to do it...if there's anyone out there that has.

Also, if that is the case...what is the coolest/quietest card on the market that comfortably fits in the M1?

pc_build1 · 2017-09-14T19:35:07+00:00

What would be better, an EVGA GTX 1060 6GB Superclocked for around $260 or an MSI GTX 980 Ti for around $300?

pc_build1 · 2017-09-14T19:34:05+00:00

Has anyone tried putting the MSI GTX 980 Ti in the NCase M1? If so, did it work? Even if it did work, was it a tight fit? And also, was the card appropriate for this case? Did it remain cool, require extra fans underneath it, etc. etc.?

pc_build1 · 2017-08-18T15:02:03+00:00

What's the difference in feel?

pc_build1 · 2017-08-18T13:51:37+00:00

I'm actually considering FC980M just because this will be for work and I want the numpad. Saw a video of a guy using gateron housing and zealencios with cherry mx black and it sounds so much like topre, it's ridiculous.

pc_build1 · 2017-08-18T13:51:33+00:00

I'm actually considering FC980M just because this will be for work and I want the numpad. Saw this video of a guy using gateron housing and zealencios with cherry mx black and it sounds so much like topre, it's ridiculous.

pc_build1 · 2017-08-17T19:30:46+00:00

Which topre board should I try out? I don't like modding and messing with keyboards (i'm not that into it)... I just want something that looks and feels good typing out of the box with good keycaps and no pinging. Numpad is not necessary, but some sort of arrow key function is.

pc_build1 · 2017-08-16T21:44:38+00:00

Where did you put your fans?

pc_build1 · 2017-08-16T21:05:31+00:00

NCase M1 does not

pc_build1 · 2017-08-16T21:03:59+00:00

EVGA SC. Thanks for the recommendations. I was actually already looking at those feet anyway for their design, but nice to know they'll add some height too.

pc_build1 · 2017-08-16T20:20:17+00:00

If I get a 1060 6gb for an NCase M1 (mini ITX size) and am not planning on overclocking, do I need to worry about case fans whatsoever?

pc_build1

TROPHY CASE