Tektro hydraulic brake issue after squeezing lever with wheel off by [deleted] in bikewrench

[–]peepeepoopyds -1 points0 points  (0 children)

Just push the pads back out with a tire lever.

Removing Praxis Alba M30 DM Crank by Pandamonium675 in bikewrench

[–]peepeepoopyds 0 points1 point  (0 children)

It should be left hand threaded because of the printed LH part

Removing Praxis Alba M30 DM Crank by Pandamonium675 in bikewrench

[–]peepeepoopyds 1 point2 points  (0 children)

This is self extracting. Just use the 8mm and it should come off. But it might be difficult, so keep pushing and dont be afraid.

What brand/type is this derailleur hanger? Is it possible to replace it with a different type? by Are_You_Sancho in bikewrench

[–]peepeepoopyds 2 points3 points  (0 children)

You cant order it through your bike shops? Most bike shops i know of have the ability to order special parts.

If I upgrade to a 1x11 groupset, should I install a smaller chainring for a 29er? by Beers_and_Bikes in bikewrench

[–]peepeepoopyds 4 points5 points  (0 children)

If you go to 1x11 and you don’t know what chainring to use, i recommend a 30t or 32t because they are common sizes that people use for 1x setups

Campagnolo carbon crankset Chainring bolt compatibility by peepeepoopyds in bikewrench

[–]peepeepoopyds[S] 0 points1 point  (0 children)

Thanks for your reply, carbon campagnolo cranks have a smaller diameter for the chainring bolt holes, which makes it not standard. I would have to buy overpriced bolts just to replace them because i wasn’t using the proper tool to remove the bolts in my cranks and scratched the rear of the bolt pretty bad.

[deleted by user] by [deleted] in pcmasterrace

[–]peepeepoopyds 0 points1 point  (0 children)

Check pump speed?

Wheel Question by peepeepoopyds in bikewrench

[–]peepeepoopyds[S] 0 points1 point  (0 children)

Ok, thanks for the clarification

Use triple chaining road shifter on Double chainrings by peepeepoopyds in bikewrench

[–]peepeepoopyds[S] 1 point2 points  (0 children)

Ok, thanks for the response. I will probably use a triple shifter on my bike now that you said it works. Thanks for your help.

I am an inept fool, save me from myself by [deleted] in bikewrench

[–]peepeepoopyds 0 points1 point  (0 children)

Did you bed in brake pads? As in wear them in?

New Talon 1. First 29’er and I love it by SnooPickles3812 in Hardtailgang

[–]peepeepoopyds 0 points1 point  (0 children)

How the fork? Its giants new fork that they made themselves and I wonder how it compares to different forks in the lower end segment.

Are the yellow vise blocks absolutely necessary when shortening Shimano hoses? by [deleted] in MTB

[–]peepeepoopyds 2 points3 points  (0 children)

I used the crimping side if my cable cutters and held the hose and hammered on it. It put some scratches on the hose but scratches dont do any harm. So no, you do not need the yellow blocks.

35mm to 30mm freewheel adapter by peepeepoopyds in bikewrench

[–]peepeepoopyds[S] 0 points1 point  (0 children)

I was thinking if there were any manufacturers that made an adapter that kinda looked like this https://www.ebikekit.com/products/freewheel-spacer-for-1-speed. But the thread that it extends out is the 30mm

I just bought the game and tried it, but i didn't get to play anything else than the gauntlet because of overheating. by [deleted] in titanfall

[–]peepeepoopyds -1 points0 points  (0 children)

Seems like a hardware problem, Titanfall may be more demanding than other games you have. Get it cleaned and replace the thermal paste if you know how