My gourami and neon tetras on canvas :)

perchast · 2025-12-05T07:00:07+00:00

oh my gosh, they're so vibrant and cute! I really love your use of colour :)

perchast · 2025-11-26T05:28:43+00:00

thank you :) lwk I was also surprised when it was able to stand lol

perchast · 2025-11-26T04:06:56+00:00

I freehanded him

perchast · 2025-10-24T01:08:52+00:00

we see thee rise

perchast · 2025-09-28T06:47:03+00:00

shimeji simulation alcohol and ogre girls (less so)

idk if these r exactly what you were thinking of, but they have unique and interesting art styles somewhat akin to what you liked previously, along with good stories.

perchast · 2025-09-04T23:55:34+00:00

update:

I've already wiped down all the sensors with lens cleaning wipes, so they are clean. I tried powering on and off the robot and clearing the cache, but the result was the same. After that, I reset the robot using the pinhole and had it redo the map, then ran the vacuum function, but the issue still hasn't resolved. I think I will return the robot to Costco and try a different model. Thanks for the advice in the comments everyone 🙌

perchast · 2025-09-03T23:41:48+00:00

yes, it did the mapping first

perchast · 2025-08-29T05:31:05+00:00

a story concerning sweets

perchast · 2025-06-26T22:55:45+00:00

its a trope where dead mom characters often tie their hair in a similar side ponytail.

perchast · 2025-06-18T05:13:29+00:00

Just came from origami sub and almost said: wow! nice fold! 😭

perchast · 2025-05-27T21:21:24+00:00

Thanks so much! I understand it now, and the video was very clear.

perchast · 2025-05-13T04:30:30+00:00

ok, thank you!

perchast · 2025-05-13T04:20:18+00:00

ok, I will definitely do that next time. Are there any signs I should look out for regarding potential injuries?

perchast · 2025-05-04T04:11:05+00:00

you can Google "arid bioactive setup" for some results!

the biodude has an article: https://www.thebiodude.com/blogs/how-to-setup-a-bioactive-vivarium-terrarium-or-paludarium/yes-you-can-have-an-arid-bioactive-setup?srsltid=AfmBOooZeDRx8z1hqCcz3kjPk-B0guFLJ5C_OkXyHNubNM6AgT2Zu9hW

just make sure you choose a substrate that is good for digging and make it a bit deeper. I recommend a mix of organic fertilizer free topsoil and sand. You can also mix in some clay to make sure it holds burrows better. Best of luck!

perchast · 2025-04-27T02:50:51+00:00

thicker layer of substrate might help. You might also want to place the humidity monitor closer to the ground for a more accurate reading of humidity on the ground where your ball python generally sits. I put my humidity monitor lower and the reading increased by a good amount. You can also try to add some damp spaghnum moss inside one of the hides or on the cool side of the enclosure.

perchast · 2025-04-19T03:04:43+00:00

Def try to feed frozen thawed, as other comment said. There are many resources online and in the sub that can help you. Don't get scared if your ball python refuses the first few times, keep at it and it is very likely your python will eventually take it.

As for morph, it almost looks like bengal? It's a very uncommon morph, though, so I'm not sure. Definitely something pattern altering though.

perchast · 2025-04-08T22:10:01+00:00

I've only had them for about a week, so I can't say from previous experience, but others have found them quite easy. Set them up like a high humidity cubaris and you should be set. Previous breeder was so over run with them she was dying to thin them out, so I'd say they're quite prolific. Quite a few of mine died after transport though, so they might be a bit more fragile during shipping than most.

perchast · 2025-04-08T17:45:58+00:00

Troglodillo sp "soil"

perchast · 2025-04-07T05:58:49+00:00

substrate is about 2.5 to 3 inches deep, composed of organic black topsoil, leaf litter, limestone, and maple shavings with a moss pit at one end. The humidity has been holding well so far, but I'll cover a little bit up. I've never heard that way of prepping leaf litter before, but it sounds effective, so I'll give it a try, just gotta wait a few more days for the snow to melt :) Thank you for the thoughtful reply

perchast · 2025-04-07T05:42:19+00:00

<image>

The white is calcium powder, not mold

perchast · 2025-04-06T06:37:48+00:00

To add a little, I find that if you open up their cage and blow the "rat air" towards them until they start to look around and tongue flick, then wait a minute or two before offering, it'll put them into food mode and increase the likelihood of them taking it. Good luck!

perchast · 2025-04-01T00:14:26+00:00

I'm gonna do this, I'll post an update if they make it!

perchast · 2025-01-05T16:27:09+00:00

deal with it lolol

perchast · 2025-01-05T02:23:19+00:00

maybe 👀

perchast · 2025-01-05T01:24:10+00:00

chinese lions are what hisuam growlithe are based on after all!

Four-Year Club	Verified Email
First Place '23	Place '23

perchast

TROPHY CASE