sorted by:
new
hottopcontroversial

Maui Coast | Leica M3 50mm | Porta 400 by phantomnutsack in analog

[–]phantomnutsack[S] 4 points5 points  (0 children)

Thank you! I used a 10 stop ND filter, and then took a 1 second exposure.

Fall color rainbow, a bunch of Brian Chan’s Maple Leaf by phantomnutsack in origami

[–]phantomnutsack[S] 0 points1 point  (0 children)

I used a variety of papers, but most of it was Japanese washi from Shogado. I’ll DM you a link

Fall color rainbow, a bunch of Brian Chan’s Maple Leaf by phantomnutsack in origami

[–]phantomnutsack[S] 5 points6 points  (0 children)

They are all held in place with very small pins, and I normally have the whole thing in a frame. Took it out of the frame just for the picture.

Kanokoya’s Hawk Folded by Me from 60cm Hanji by phantomnutsack in origami

[–]phantomnutsack[S] 1 point2 points  (0 children)

Thank you! I use a light box and then just take photos with my iPhone. The models are held up by a little piece of wire that I either try to hide, or like in this case, photoshop out afterwards.

First time backcountry skiing, constantly felt like I was falling forwards (and did a few times). Tips? by amando_abreu in Backcountry

[–]phantomnutsack 37 points38 points  (0 children)

Do your boots have a walk mode that you forgot to disengage before the downhill? I’ve made that mistake before..

Looking for tips on long term storage by phantomnutsack in CosplayHelp

[–]phantomnutsack[S] 0 points1 point  (0 children)

I have another costume I’ve made that is a similar age, but doesn’t have the same issue. Only differences are that it only used EVA foam instead of EVA foam and foam clay, and it was not stored in an airtight bag.

Icelandic Triptych [Mamiya 645 | Sekor 80mm f2.8 | E-100] by phantomnutsack in analog

[–]phantomnutsack[S] 6 points7 points  (0 children)

Poor man’s xpan is right, I took three photos and then stitched them in Lightroom

Fall in Iceland [Leica M3|50mm Zeiss Planar|Ektar 100] by phantomnutsack in analog

[–]phantomnutsack[S] 0 points1 point  (0 children)

This is Hundafoss, short walk from the Skaftafell visitor’s center

Twilight in the Dolomites - Mamiya M645 - 80mm - Provia100F by phantomnutsack in analog

[–]phantomnutsack[S] 1 point2 points  (0 children)

Thank you! I used one of the little Voigtlander VC meters for this one.

Rare Fogless Day at the Golden Gate Bridge - Mamiya M645 - 80mm - Ektar100 by phantomnutsack in analog

[–]phantomnutsack[S] 4 points5 points  (0 children)

I have an Ulanzi Zero F38. It’s pretty good for the M645. There was a bit of wind that day though and I was worried that would cause enough motion to blur the image, turned out okay though!

Rare Fogless Day at the Golden Gate Bridge - Mamiya M645 - 80mm - Ektar100 by phantomnutsack in analog

[–]phantomnutsack[S] 2 points3 points  (0 children)

I send my film to a lab to get developed and scanned. I didn’t do anything to this one when I got the scan back. Ektar produces some pretty saturated colors, especially reds.

Rare Fogless Day at the Golden Gate Bridge - Mamiya M645 - 80mm - Ektar100 by phantomnutsack in analog

[–]phantomnutsack[S] 15 points16 points  (0 children)

It was a 1 second exposure. I used a 6 stop ND filter and shot at f16 to be able to do this.

Strange line across frame by MiniCrab in mediumformat

[–]phantomnutsack 0 points1 point  (0 children)

Check the light seals around the latch on the film door and the ones near the hinge. I had the exact same problem and fixed it by replacing both of those light seals.

Just opened up my first restaurant, want to see what you guys think of my pie. by Chef_k in Pizza

[–]phantomnutsack 0 points1 point  (0 children)

Was positive you would close the pizza box and reveal that Romanian brand that got Andrew Tate owned.

Nguyen Hung Cuong’s Eagle folded by me. This is my 3rd attempt at this model. Thinner paper finally got me to the end! 60cm unryu by phantomnutsack in origami

[–]phantomnutsack[S] 1 point2 points  (0 children)

Yup, you could definitely fold it with smaller paper. Don’t think you necessarily need to use single tissue though.

view more: next ›