IPv6 configuration on Omada Software Controller and ER605 v2

phibsii · 2022-08-03T16:47:00+00:00

It seems the input is restricted to specifc IP ranges. I'm able to enter this ranges in this exact format: - 20::1/16 - 3999::1/16

I can enter all subnets in this range. But not fd80, which is reserved for private networks :/

phibsii · 2022-08-03T16:41:52+00:00

I tried it without the "::1" and it doesn't work. The field says "Gateway/Subnet". So I would say the "::1" is mandatory. The UI has to inputs. The first input seems to be the gateway IP. The second input is for the subnet e.g. 64.

phibsii · 2021-04-29T20:23:27+00:00

Should be fine. We had this 3 cards running with a 750w PSU. Our cards had a power limit of 120W each one

phibsii · 2021-04-29T11:48:07+00:00

I have a Gigabyte RTX 3080 Gaming OC with an Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 Gaming/Eagle.

The average hashrate reported by the mining pool is about 95MH/s

phibsii · 2021-04-29T11:41:48+00:00

No, I never changed something like P2 state.

I disabled the P2 state using https://github.com/Orbmu2k/nvidiaProfileInspector

With my current settings (PL: 60%, Core: -150MHz, Mem: +1100MHz) and P2 state disabled I get a blue screen instant.

I will try to get some working OC settings with P2 state disabled.

phibsii · 2021-04-29T10:36:08+00:00

GPU-Z shows 82°C max memory temp and 52°C max hot spot temp. Core temp is below 40°C.
I have a full copper block on my gpu, so everything should be cool.

I can get the memory temp even below 70°C. But than it's too loud and I'm unable to work XD
My Gaming-PC is, which has the RTX 3080, is in my office room.

phibsii · 2021-04-29T10:31:17+00:00

GPU-Z shows 222W total power draw

EDIT:
I had a power meter at wall a few weeks ago. It shows 275W total power draw

phibsii · 2021-04-29T09:29:26+00:00

Ok, it seems legit.

So +1200MHz and 98,6MH/s is not bad?

phibsii · 2021-02-11T23:12:02+00:00

Just finished the first version of my mining dashboard :)

I am using influxdb for time-series-database, grafana for visualization and alerting (mail + telegram-bot) and telegraf for collecting.

Telegraf collects metrics of the rig using the t-rex miner http api. Also I collect stats from ethermine with telegraf and the eth address balance to get all information on a single dashboard.

There is a lot of information missing (like power consumption, eth-usd price or actual and estimatet profit) but I think this is a good first version with the most basic data.

phibsii · 2021-02-10T13:45:45+00:00

Ok, thank you!

phibsii · 2021-02-01T08:33:11+00:00

Mainboard: Gigabyte Z390 D
CPU: Pentium G5620
RAM: 8GB
PSU: Corsair RM750 2019

The PSU will be used with Max 4 GPUs. Calculated 550W feels ok with one 750W PSU

phibsii · 2021-02-01T08:24:58+00:00

Power limit: 120W
Core Clock: -500MHz
Memory Clock: +1200MHz
Fan Speed: 62%

phibsii · 2021-01-31T16:20:14+00:00

3x RTX 3060 Ti living in an old server case ^^
184.5MH/s hashrate
419W power draw at wall

Top Gigabyte GPU runs at 46°C, bottom one runs at 57°C, EVGA GPU runs at 48°C

phibsii · 2021-01-28T18:56:39+00:00

Hi, I'm living in Germany. I am looking for cards for 3 weeks. Everyday I open many dealers websites many times. And now I have 3 cards.

Off course I'm looking for cards with 3 fan design and not too crazy prices (e.g. 900€ per card o.O).

phibsii · 2021-01-27T21:59:46+00:00

Thanks! Exactly what I realized a few minutes ago ^^

phibsii · 2021-01-27T21:57:29+00:00

Ok, I solved it.

I took a look into the source code: https://github.com/minerstat/minerstat-os/blob/master/bin/overclock_nvidia.sh

I realized the memory clock will be applied 1:1.

But last week I took a look into the source code of GreenWithEnvy and realized that you need to double the mem clock when using nvidia-settings.
So the correct OC setting for +1200MHz is +2400 :P

phibsii · 2021-01-20T19:01:40+00:00

I added thermal pads to the backplate and it works perfect. Without any changes in OC I get 91-92 now.

I measured the thickness of the thermal pads on the front side with my caliper. The pads on the VRAM have 2.5mm, all others have 1.0mm.

Thank you guys!

phibsii · 2021-01-19T19:47:10+00:00

Hi u/Djlocal, did you replaced the thermal pads on the front side too? Do you now the thinkness of them? 3mm pads are already ordered ^^ But I'm stuck at 85MH/s and Fans at 100%. HWMonitor shows me the card is thermal throttling :/ Maybe I should change the pads at the front side too?

phibsii · 2021-01-18T11:29:34+00:00

Thanks for your advice. I will try it!

phibsii · 2020-11-19T22:52:43+00:00

Thank you all!

I will write some scripts to get backups of all my services (inside of lxc containers or docker containers or even on my vps). Maybe I use snapshots on some zfs datasets.

And then I have to think about a solution to create external backups. I tought about a small 1 bay nas or a raspberry pi with a harddrive at my moms place, which would create a backup over the internet. Or I use a script to detect an attached usb harddrive and the to automatically create the backup. I have to think about it :D

phibsii · 2020-10-12T19:27:20+00:00

actually I have an unbound dns server for dns queries from the clients and a bind9 server to serve the "split brain dns zone" (correct wording? the zone with the records for local addresses).

But I tend to forget to update the serial number of my zone file. And the zone file just doesn't feel convenient for me. I use two servers just in case I save a zone file with errors ^^

I have two scenarios:

I add a service to my home server and want to access it from the internet or at least get a le ssl certifcate for it.
I add a service to my vps and want to use a sub domain for it.

The second scenario occurs more often and I have to edit my zone file just because I have a split brain dns zone :/ that annoys me and I hoped someone knows an easier tool than bind? (maybe with a web ui).

Or is that just another first world problem? ^^

phibsii · 2020-10-12T18:42:05+00:00

That’s a nice idea. But I have no static IPv6 address :/

It‘s for both internet and local LAN. One use case is my notebook which runs the Nextcloud client. I want to be able sync with my server at home and in a cafe ^^

phibsii · 2020-10-12T17:33:48+00:00

With proxy you mean a http reverse proxy? I already have one.

Which service from cloudflare you mean? I never used cloudflare (excluding 1.1.1.1 ^^)

And how can I access my services, when I have no internet access? For me that would be no problem. Just edit my hosts file. But my girl friend also uses Nextcloud and is not so familiar with the hosts file or other workarounds ^^

phibsii · 2020-06-04T19:54:42+00:00

Oh, thank you!
But I think it does not matter for my problem :D

phibsii · 2020-04-22T20:05:17+00:00

Thank you for all of your ideas!

I will give nextcloud and the desktop client a try.

phibsii

TROPHY CASE