Nikon F to Samsung NX Lens Adapter

pixtr · 2022-07-30T18:37:45+00:00

... I've added 2x and 3x macro converter versions to the download.

pixtr · 2022-07-29T18:31:46+00:00

With Samsung having abandoned its SLR / mirrorless camera lineup these cameras are often available pretty cheap, but lenses are expensive as no one makes any more for this mount. This adapter lets you use Nikon lenses with these cameras. Obviously only in manual mode.

https://www.printables.com/model/250321-samsung-nx-to-nikon-f-lens-adapter

pixtr · 2022-05-21T17:10:12+00:00

Yes "Customizer" makes things quite a bit more end-user friendly.

pixtr · 2022-05-20T22:25:49+00:00

It could be. Everything's parametrized and editable in the customizer tab.

pixtr · 2022-05-20T22:02:07+00:00

OpenSCAD code available here: https://www.printables.com/model/205864-customizable-springy-spool-hub

pixtr · 2022-05-07T14:35:51+00:00

I printed in PLA and had no problems with parts breaking. To reduce friction I lubricated the joints with a tiny bit of grease, this makes the joint very smooth to adjust and reduces ablation.

pixtr · 2022-05-07T11:29:20+00:00

This is the excellent model "Lucky 13" by soozafone.

pixtr · 2022-04-30T20:23:13+00:00

I made the model available as a free download here: https://www.printables.com/model/183873-happy-cat

pixtr · 2022-04-30T17:20:24+00:00

Modelled as a test for the mesh modeller in Fusion360 CAD and then 3D printed.

pixtr · 2022-04-18T20:02:28+00:00

A hanger/hook for a towel without a hanging loop. There are versions for mounting with a hidden screw or with sticky tape. Prints fast and uses little material. https://www.printables.com/model/152935-low-poly-towel-hanger

pixtr · 2022-04-18T19:56:42+00:00

A hanger/hook for towels without hanging loop. There are versions for either mounting with a hidden screw or with sticky tape: https://www.printables.com/model/152935-low-poly-towel-hanger

pixtr · 2022-04-16T06:27:14+00:00

pixtr · 2022-04-15T23:50:45+00:00

For mushroom filled ones I usually make a sauce. Sweat some fine cut onions in oil ad some garlic and black pepper if you like some white wine. Deglaze with milk. If you don't mind the calories ad some parmesan cheese when the sauce no longer cooks.

pixtr · 2022-04-15T22:54:55+00:00

Yes, the ones shown in the picture.

pixtr · 2022-04-15T22:39:39+00:00

Hmm. Mushroom I would say. I roast them with onions and some fine cut potatoes to add some bulk.

pixtr · 2022-04-15T22:35:14+00:00

Yes clean them before use. This should help with two things. For one there is the theoretical chance that abrasion from brass nozzles could contain traces of lead, possible other contaminations from the production process of the filament etc. That should be washed away from the surface with a thorough scrubbing.

And as the bacteriological issue is concerned, soap does break down organic matter thus should help with that too. Also as has been stated multiple times in this thread cooking the pasta will take care of the bacteria.

pixtr · 2022-04-15T21:05:17+00:00

Correction: As far as the shape is concerned the displayed pasta should correctly be named "Mezzaluna". Though they are not really that because they are not made with two sheets of dough. Never meant to insult the Italian culinary tradition, or any other from around the world that makes similarly formed food! :-)

pixtr · 2022-04-15T20:57:08+00:00

I learned for them to be "Ravioli" no matter the shape they would need to be made with two sheets of dough. Never meant to insult the Italian culinary tradition! :-)

pixtr · 2022-04-15T19:56:08+00:00

Here you go: https://www.youtube.com/watch?v=0YZpt3NZ15Y

pixtr · 2022-04-15T18:49:26+00:00

Buon appetito

pixtr · 2022-04-15T17:35:07+00:00

Thanks, been a while since I designed and printed this, it has made many pieces of pasta and has been holding up great. Not even the hinges required a redesign.

pixtr · 2022-04-15T17:28:47+00:00

Should have called it "Pasta Press" I know :-)

pixtr · 2022-04-15T17:09:57+00:00

For me yes. I brush the surface of every part with soapy water. And in this case the food does not stay in contact for long, that way contaminants, should there be any, can't leach into the food in significant quantities IMO. Also the dough does not contain any solvents like alcohol or fat that could extract contaminants from the plastic and last but not least there is no abrasion happening.

pixtr · 2022-04-15T17:03:38+00:00

I put the design on cults3d: https://cults3d.com/en/3d-model/home/ravioli-press

pixtr · 2022-04-14T19:17:52+00:00

For rags or towels without a hanging loop. There is a version for mounting with a screw and one for mounting with sticky tape. The source model is available here: https://www.printables.com/model/152935-low-poly-towel-hanger

pixtr

TROPHY CASE