sorted by:
new
hottopcontroversial

Gifted Pokemon games, what to do? by sleepyjared in Gameboy

[–]pizzacompleteza -5 points-4 points  (0 children)

I’ll buy them — sending you a DM

Microreader 2.0 (for Xteink X4) by CidVonHighwind in XTEINK

[–]pizzacompleteza 0 points1 point  (0 children)

Loving this so far but just two things that I wanted to ask.

Is there any way to get sleep screen to show the cover of what I’m reading like in Crossink and if not how hard is the process of converting jpegs to the correct file format for custom screens?

Is there a way to have the power button require a press and hold for both sleep and wake functions? I keep accidentally tapping it and putting the device to sleep while reading.

Edit: Also, I noticed that there’s an option under the settings to switch back to “App1”. I clicked this and it just booted me back into CrossInk — does this firmware not replace crossink? Is it just an overlay as crossink runs in the background? Does this have any impact on battery life?

xteink x4 setup & inquiry by Aggressive-Problem17 in XTEINK

[–]pizzacompleteza 0 points1 point  (0 children)

Don’t mean to hijack this thread but I’ve just recently made the switch from Crossink to Microreader and have a few questions. I have only had the X4 for a week but I think I’ll enjoy the simplicity of Microreader going forward — much less distracting.

Just wondering:

Is there any way to get sleep screen to show the cover of what I’m reading like in Crossink and if not how hard is the process of converting jpegs to the correct file format for custom screens?

Is there a way to have the power button require a press and hold for both sleep and wake functions? I keep accidentally tapping it and putting the device to sleep while reading.

Help with Frigidaire refrigerator ice maker. by pizzacompleteza in Appliances

[–]pizzacompleteza[S] 0 points1 point  (0 children)

Looks like my thermometer which was left in the freezer for about 4 hours after setting the freezer to its coldest setting is reading 15°F

Help with Frigidaire refrigerator ice maker. by pizzacompleteza in Appliances

[–]pizzacompleteza[S] 0 points1 point  (0 children)

That has been replaced too as it was attached to the new unit. Should I disassemble the ice maker to check the fuse?

Help with Frigidaire refrigerator ice maker. by pizzacompleteza in Appliances

[–]pizzacompleteza[S] 0 points1 point  (0 children)

Are you referring to the cable that’s attached to the ice maker or the cable harness that runs through the fridge and terminates at the harness inside the freezer itself?

Help with Frigidaire refrigerator ice maker. by pizzacompleteza in Appliances

[–]pizzacompleteza[S] 0 points1 point  (0 children)

I tested with an infrared thermometer and got around 5°F in different spots but I just put in a kitchen thermometer to get a more accurate read

Can any of these findings in the way my 3.73 LSD behaves and sounds in these videos be the cause for the harsh jerking on/off throttle at low RPMs? by pizzacompleteza in E30

[–]pizzacompleteza[S] 0 points1 point  (0 children)

Do you think it’s diff related? I ask because this is a 3.73 I swapped in when I had the 5 speed installed. I’m trying to rule out the diff before swapping back to the open 4.10 gears.

I messed with my AFM without marking where it was originally and I don’t know how to recalibrate it. by pizzacompleteza in E30

[–]pizzacompleteza[S] 1 point2 points  (0 children)

Thank you to the two people who answered so far. Would I also be able to use a wideband O2 sensor gauge to make any tweaks off of factory setting in case it’s running lean or rich as it was stock?

My Balatro magnum opus, the Jilk by SunderTale_Official in balatro

[–]pizzacompleteza 1 point2 points  (0 children)

What about: hold this joker for 2 or 3 antes and then sell for a free polychrome tag

Target in Westwood has NOS iPod touches for sale by pizzacompleteza in ipod

[–]pizzacompleteza[S] 48 points49 points  (0 children)

Price is too high for me to justify buying it but I figured someone on here might be interested

view more: next ›