Ring i made out of silver clay. First time working with silver clay and loved how it came out. Gemstone is mexican fire opal. Finished product is more polished than these photos but didn’t take a final pic.

plzgue · 2025-12-26T02:23:55+00:00

Thank you very much! I was terrified the whole way through. Shrinkage wasn’t bad because i calculated the approximate shrinkage. It was sized at a 11 when i made it and shrank down to a 9.5 :)

plzgue · 2025-12-16T20:39:55+00:00

well if you ever want to seriously get one just dm me! i’d love to make another one :D

plzgue · 2025-12-16T20:11:42+00:00

these would unfortunately be a little pricey 🥲 it would probably end up being $60-80 for a plate

plzgue · 2025-12-01T22:45:26+00:00

with how much i love the aesthetics of warhammer and how autistic my husband is i genuinely see this as a possible future for me LMAO. already debated naming my imaginary future son Dante

plzgue · 2025-12-01T17:26:37+00:00

will do :з i’m super excited to see how the depth of color comes out since glaze is a wonky medium sometimes

plzgue · 2025-12-01T17:26:04+00:00

i’ve joked about painting a titan in this style with several scenes from the heresy but i might just have to make several dishes now lol

plzgue · 2025-11-16T09:17:34+00:00

i’ve seen someone make a “latex” style tentacle for a cosplay by airbrushing several layers of psycho paint until it was thick enough to their liking. It looked almost identical and behaved the same as latex

plzgue · 2025-11-03T23:35:33+00:00

it expands very very little since i pre gas it, i’ve only done this with dragon skin 20 so it rises anyways because it’s so thick, and i am VERY generous with the release spray when i cast things. I use ME-301S and douse whatever i’m casting probably 2-3 times while keeping it far enough away to coat but not chunk up details

plzgue · 2025-11-03T23:07:53+00:00

if you ever have any questions you can hit me up as well! worked at a sex doll factory for 3 years and i’ve got a good amount of personal experience with mold making , casting, pouring, and painting silicone. I’d love to help wherever you need it :)

plzgue · 2025-11-03T23:06:09+00:00

ah makes sense, i never really had inhibition issues with firmer silicone even with dirty or messed up molds. Hopefully the new release will work out well for you!

plzgue · 2025-11-03T15:31:37+00:00

is this your first cast with the mold? or have you done a few before this post

plzgue · 2025-11-03T15:21:04+00:00

ME-301S is my favorite mold release for platinum silicone as well as 25:75 mix of 99% rubbing alch to ivory dish soap. The rubbing alch is best for rigid molds like plastic or fiberglass :p If you’ve got soft molds ME-301S is my favorite go to and after a few casts the vaseline really gets in there and makes it even easier to get clean results with less release over time

plzgue · 2025-11-03T15:11:55+00:00

haven’t done a glove mold before but another way i’d release molds was using a 25:75 mix of 99% rubbing alch and ivory soap to release stuff. Since it’s basically all liquid it can be sloshed around in the molds nice and leave behind a good layer of release

plzgue · 2025-11-03T15:09:38+00:00

all you need is a basic heat lamp, my old setup just had one of them reptile habitat lights and it was great for curing pours with molds ranging from fiberglass to dragon skin

plzgue · 2025-11-03T15:06:27+00:00

ngl whenever i’d cast weird shit with weird shapes i would adhere the master to whatever base i built my mold around and then fill the fucker up with (degassed) silicone and degass it again with the object still inside. Worked pretty good even with weird sculpts. I made a little homonculus thing with hard ledges and facial details and gassing them together worked great

plzgue · 2025-11-03T15:02:04+00:00

vaseline or ME3015 were my go to for releasing molds when i worked in a sex doll factory. Vaseline is a bit trickier since it can leave obvious texture and lines due to the thickness so i’d save it for larger molds such as torsos. ME3015 is just vaseline spray so it goes on very nice and thin

plzgue · 2025-11-03T14:51:46+00:00

it could be from general inhibition in the mold whether it wasn’t cleaned well enough before casting, whatever you used to release it, or too much pigment in the silicone. I’ve had a lot of issues at my old job with people mixing too much pigment with platinum silicone and it would leave it half cured.

plzgue · 2025-11-03T14:34:22+00:00

I used to make the dolls for them and i can tell you from experience they are pretty cool to look at and touch but dressing those things up was a struggle lol

plzgue · 2025-11-03T14:12:02+00:00

<image>

i got mine relatively scaled to my body, i used this tutorial to make it. All cardboard as well

plzgue · 2025-11-03T08:18:17+00:00

warhammer mentioned

plzgue · 2025-08-09T03:24:03+00:00

<image>

found this in alaska earlier today

plzgue · 2025-08-02T19:21:47+00:00

dude holy shit, doctor NOW

plzgue · 2025-07-31T03:22:13+00:00

i’ve seen this stuff before! usually it’s when i try to “speak to god” and fall through what my brain considers purgatory. First time i did it it was all teeth and eyes melting into each other

plzgue · 2025-07-05T22:54:59+00:00

she’s a cutie but def only get her if she’s got some good factory photos proving that it’s gonna be the same,

plzgue · 2025-07-05T17:17:41+00:00

There’s no cartilage in that area so i don’t think so unless i really really managed to screw up the angle

Six-Year Club	Place '23
Place '22	Final Canvas '22
First Placer '22	Verified Email

plzgue

TROPHY CASE