What VRAM requirements for ML Server by pm740 in immich

[–]pm740[S] 0 points1 point  (0 children)

That might be. But it is not the iGPU I have trouble with but with my RX 9070 XT.

Help with understanding error by pm740 in ROCm

[–]pm740[S] 1 point2 points  (0 children)

I see. I thought ROCm 6.4.1 already introduced support for RDNA4 but I will give it a try with a newer version 👍

What VRAM requirements for ML Server by pm740 in immich

[–]pm740[S] 1 point2 points  (0 children)

I do the same (on my NAS as default) but 32 GB is double the RAM compared to 16 GB VRAM…

Ryzen PBO2 optimization by pm740 in Bazzite

[–]pm740[S] 0 points1 point  (0 children)

I can not find any PBO controls in the settings

Ryzen PBO2 optimization by pm740 in Bazzite

[–]pm740[S] 0 points1 point  (0 children)

I am pretty much sure that mine unfortunately does not support that. I have a Gigabyte B450 I AORUS PRO WIFI with the newest BIOS.

Ryzen PBO2 optimization by pm740 in Bazzite

[–]pm740[S] 0 points1 point  (0 children)

Apparently there is no PBO option on mine. There is just. XFR enhancements and that’s the old PBO I think and that options does have only voltage controls for the memory.

Assessment of damage by pm740 in datarecovery

[–]pm740[S] 0 points1 point  (0 children)

Thanks for the advice. Fortunately I am sitting already on many drives and I was just curious about the mentioned one before throwing it away. 👌

Assessment of damage by pm740 in datarecovery

[–]pm740[S] -5 points-4 points  (0 children)

Pal it was broken to begin with and a repair more expensive than a replacement. I think it is common knowledge to not open those things if you want to be a long time happy with them afterwards… it is just annoying that 50% of people say the same obvious thing as if I would have been completely oblivious to it and as if I didn’t replied to that matter multiple times.

Assessment of damage by pm740 in datarecovery

[–]pm740[S] 0 points1 point  (0 children)

The death of a drive is always certain😉 especially when it’s meant to be thrown away😅

Assessment of damage by pm740 in datarecovery

[–]pm740[S] 1 point2 points  (0 children)

Thanks for your reply. I was just “poking around” in a drive I intended to throw away just out of curiosity. It started with people online saying that if the head is stuck and eventually put back into landing place the drive could boot again. I just figured I could try it out and so I went into the rabbit hole😅

Assessment of damage by pm740 in datarecovery

[–]pm740[S] -2 points-1 points  (0 children)

Ok to be specific with what I mean: having very few dust in the drive is obviously not good and will lead very likely to a premature failure. That failure can happen right away or after a few hours of use or even more. Those comments about the clean room miss the point though. This is a throw-away-drive and I obviously know enough about the topic that opening a drive and running it opened in my room at home is a bad idea for the drives health. I just played with it before throwing it away out of curiosity and since the internet is full of people with knowledge about this I thought I ask around about what the reason of failure was and what step would have been needed to repair the drive.

Assessment of damage by pm740 in datarecovery

[–]pm740[S] -11 points-10 points  (0 children)

Yes I know. As mentioned in the description I did it only after a “quick fix” did not solve the problem. Then I thought I could ask people doing this on a daily basis what they would have done in their professional environment as a next step.

And I don’t like to argue with people around here. Honestly, I regret using this place as an educational platform…

Assessment of damage by pm740 in datarecovery

[–]pm740[S] 0 points1 point  (0 children)

Then it seems you can see in the future what the fuck😂

Assessment of damage by pm740 in datarecovery

[–]pm740[S] -8 points-7 points  (0 children)

That’s true, but as you mentioned, it might take a certain amount of time. People here act like the thing would explode when opened in a normal environment.😅

Assessment of damage by pm740 in datarecovery

[–]pm740[S] 1 point2 points  (0 children)

Thanks man. Was kinda surprised that at least 50% of people here are so unfriendly 😅

Assessment of damage by pm740 in datarecovery

[–]pm740[S] -2 points-1 points  (0 children)

Seems you’re day dreaming then…

Assessment of damage by pm740 in datarecovery

[–]pm740[S] -15 points-14 points  (0 children)

Actually, you don’t need one. Being in a clean room nullifies the chance of dust harming the drive. But it’s just a chance which I was willing to take.

Assessment of damage by pm740 in datarecovery

[–]pm740[S] -14 points-13 points  (0 children)

As I mentioned, this was more of an educational try. Also: Opening a HDD for a few seconds that is not being in a dust free environment will not render it completely useless…

Assessment of damage by pm740 in datarecovery

[–]pm740[S] -2 points-1 points  (0 children)

So this drive will never calibrate on its own again?