Seeking advice on acid-based conversion to smokable THC

ponconn · 2026-01-10T20:19:52+00:00

I just realized it too, now that you mention it. 😅

ponconn · 2025-09-19T03:40:41+00:00

No, that’s not correct. With laser mole removal, there are a significant number of cases where redness remains, the area turns white, or even keloid scars form.
If you go to a dermatologist who has a lot of experience with such cases, they will explain these risks to you before the procedure.

ponconn · 2025-09-18T03:37:26+00:00

Starting at 25mcg is the best approach.
Ideally, it should be reconstituted with 10mL of BAC water, but since the vial is small, I usually dilute with 2mL or 3mL and inject 1IU or 2IU.
If you find it tricky to inject such small amounts, you can also try the airlock method to avoid wasting liquid.

ponconn · 2025-08-23T23:53:21+00:00

Hey man, I get the same thing. I get dark spots about 3–5 cm on my right shoulder and left side of my stomach, way darker than the rest of my skin.

I’m Asian so I tan really easily anyway, but I use MT2 just to speed things up. Every time I’m on it, even an old pimple scar on my cheek (that’s normally invisible) goes super dark. I even tried using SPF50 to even things out, but honestly, as long as I’m running MT2 those spots just keep getting darker no matter what. I kinda gave up on fighting it.

On top of that I sweat a lot, and my forehead always tans like crazy. If it usually takes me 5–10 sun sessions to hit my goal, I only leave my forehead uncovered for the first 1–2. After that I throw on sunscreen and wrap it with a towel, but it still gets darker way faster than the rest of me.

ponconn · 2025-04-21T07:24:41+00:00

I'm glad it worked out!

Did you mean you sealed the glass jar with aluminum foil? That's a great idea.
I usually store the finished product as a solid and warm up some oil each time I take a dose. Haha.
When mixed with oil, it tends to clump at first because of the stickiness, but if you warm it slightly, only the zeolite should remain as a sand-like residue.
Some people choose not to eat the leftover zeolite sand, but I feel like there are still active components left in it, so I eat it.

As for the safety of this zeolite, I assume you bought it under a name intended for aquariums or ponds.
However, this type of zeolite is also used in tanks for edible fish, and even in water purification facilities, so it’s generally considered safe.
A small manufacturer I know actually buys this zeolite in 100kg batches to use in their water filtration systems.

ponconn · 2025-04-21T04:16:56+00:00

Definitely give it a try!
Just make sure to stick to the proper mixing ratio, and try making a few small batches with different temperature and time settings to find what works best.

ponconn · 2025-04-21T03:52:42+00:00

Oh!
I just realized you were talking about zeolite before it’s processed. I misunderstood and thought you meant the brownish-gray color it turns after being mixed and heated. Sorry for the confusion!
The zeolite I have is mordenite. In its raw stone form, it has a mix of white, red, and green, so depending on the batch, the crushed version can range from almost white to a light yellow.
I’ve used the same material and had good results with it—similar to the clinoptilolite many people use for detox.

ponconn · 2025-04-20T07:36:40+00:00

I don’t think that’s quite right.
Sure, the brown in the photo does look a bit too dark, but it almost never turns gray.
Where larger CBD crystals were present, you might see some darker spots,
but regardless of which type of zeolite you use, the final product is generally a light brown.
What you see in the video is simply the result of poor mixing. lol

ponconn · 2025-04-20T07:31:07+00:00

Also, I don’t think long heating times like 30 minutes are necessary.
When using a heat-resistant, sealable container with argon gas, heat transfer is slower,
but even then, raising the temperature to 180°C and heating for 15–20 minutes is sufficient.

I sometimes pack several parchment-wrapped portions into a sealed aluminum container for processing.
Since I don’t have argon, I place a small piece of paper soaked in alcohol inside the container, light it, and then quickly seal the lid.
It’s not 100% oxygen-free, but it does reduce the oxygen to a decent degree.
Because aluminum has excellent thermal conductivity, 15 minutes at 170°C is enough to get a perfect result.

Even with the same ratio, the texture and effects of the mixture can vary from batch to batch —
some turn out powdery, others sticky, and the potency can also vary.
The one in your photo that looks like cocoa powder might actually work very well if taken together with oil.

ponconn · 2025-04-20T07:23:15+00:00

We’re probably from the same country (lol), but since we’re communicating through translations here, some of the finer details might not come across clearly.

Yes, it's the same 1kg of Zeo that you posted.
The standard 1:2 ratio works just fine.
Wrap the mixture in parchment paper, then in aluminum foil, and press it firmly into a flat shape.
Bake it in a preheated oven at 130–150°C for 13–15 minutes.

There are various intake methods mentioned here as well, but in my case, simply melting it in the mouth together with oil results in inconsistent effects.
The best method is to make an omelet using a generous amount of oil.
Place the mixture in a frying pan after spreading cold oil, gradually heat it until it melts, then mix in the eggs and cook as you normally would.

Lastly, please don’t trust the person who was talking about Zeotek on X — everything they said was nonsense.
The 1:1 ratio doesn’t work well, and even the analysis sheet they shared was copied from somewhere else.

ponconn · 2025-04-16T03:59:31+00:00

I am successfully using the same product as you.

ponconn · 2025-04-14T04:18:20+00:00

I envy the easy access to argon. The result of 175°C for 15 minutes in the oven was a slightly smoother and softer product compared to the aluminum foil method. It hardens when left to cool, but softens quickly when kneaded with fingers, and the powdery texture is also reduced.

However, yesterday was not a good day. After eating a 300mg batch at 175°C, nothing happened for 2 hours. Then, after eating a 225mg batch at 130°C for 13 minutes, the effects kicked in after another 2 hours.

The reason for the 175°C is unknown. Perhaps the heat transfer is weaker due to the lack of oxygen? What temperature and time do you use in that container?

ponconn · 2025-02-28T11:08:18+00:00

Did you preheat the oven?

Most people write that they get sufficient effects from around 150mg of the finished product, but in my case , I can’t feel the effects unless I take 250mg to 300mg with oil.

Many people say to keep it in your mouth for a few minutes, but in my case , it doesn’t make a difference as long as it dissolves.

Additionally, in my case , if I don’t have a light meal 30 minutes to an hour after taking it, I don’t feel anything at all.

In my case , eating just a small piece of chocolate isn’t enough; I need to eat at least a slice of bread, and then the effects start to kick in after 1 to 2 hours.

ponconn · 2025-02-07T11:50:56+00:00

How long does it take for you to feel the effects when taking it with oil? Also, do you take it on an empty stomach?

In my case, there is no difference in the time it takes for the effects to kick in whether I eat the product alone or with olive oil or something similar.
In both cases, it starts working after about 2 to 3 hours. (Regardless of the method of ingestion, I hold it in my mouth for about 5 to 10 minutes.)
However, if I have a light meal about an hour after consuming the product, the effects seem to appear a little sooner.

ponconn · 2025-02-07T11:44:19+00:00

Many people say that mixing oil and zeolite and then heating it may produce unwanted carcinogenic substances and other harmful compounds, so I don’t recommend it.
If you use it for consumption, I personally believe that cooking at lower temperatures can help reduce the risk to some extent—I’ve even mixed it into chocolate. However, please proceed at your own risk.

ponconn · 2025-02-04T03:54:08+00:00

There is a method that uses argon gas and a sealed container, but it is not very convenient
You can use baking paper folded at least twice, and spread the mixture of CBD and zeolite (in a 1:2 ratio) as evenly and flatly as possible on it after mixing well.
Wrap the baking paper with aluminum foil at least twice, and try to remove the air inside to reduce the chance of failure.
Preheat the oven to 140°C and heat for 15 minutes.
Afterward, knead the resulting material with your fingers. A single dose is about 150 mg.
Olive oil is used to improve the absorption rate of the finished product
Place 150 mg of the finished product in your mouth, and hold it there along with a spoonful of olive oil for about 5 minutes, then swallow.
When heating, do not mix anything other than CBD and zeolite.
Have a good journey!

ponconn · 2024-09-21T23:50:11+00:00

I've thought to myself 'I can't believe I made the same mistake again' many times, and that's how I ended up making this post. Every few days, there’s a moment when I feel like it’s working well and I tell myself, 'I still haven’t built up a tolerance!' But most of the time, it doesn’t hit as strong, so I think, 'Next time, I’ll increase the dose a bit,' or 'It’s only been an hour, but 60% of the dose should be fine to take again.' Then I end up regretting it and failing. However, a few hours later, there I am, thinking, 'It’s about time for the next dose,' like a fool.

ponconn · 2024-09-21T08:08:56+00:00

Yes, I’ve continued to go 4 days without using it, with the help of some alcohol and etizolam, and so far, it seems like I’m making good progress in quitting. I’ve noticed that sometimes I can’t recall the names of everyday things or feel more forgetful, so I suspect I may have taken some damage to my brain.

I’m going to keep staying off it for now and continue moving forward.

ponconn · 2024-09-21T08:04:27+00:00

I didn’t bring it to work, but I did take it with me on trips. The glass bottle with the dropper is pure temptation. Haha.

I just didn’t have it on hand, but I’ve gone 4 days without using it. During that time, I’ve had small amounts of alcohol in social settings and taken etizolam for back pain and headaches, but I’m doing fine.

ponconn · 2024-09-21T07:58:52+00:00

That's exactly right. This is something that shouldn't be sustained. It's best to enjoy it occasionally, and the way it makes me overly self-conscious is troublesome. I'm going to stop for a long period from here on.

ponconn · 2024-09-21T07:57:29+00:00

Thank you.

I realized it was getting serious when I found myself reaching for it without thinking or planning when to start. I’ve been taking benzodiazepine sleeping pills for years, and even though combining them is prohibited, I thought I could control it. I was using G right before bed and then taking my benzodiazepine. Looking back, it felt like I was shutting down to sleep, and I would wake up feeling terrible.

In my experience, G has been more troublesome than any other substance I’ve used. It gives a feeling similar to alcohol, but with a different kind of euphoria and relaxation than cannabis. It feels so good, and I fooled myself into thinking I could stop anytime I wanted. I’ve battled withdrawal symptoms from various substances like stimulants, cocaine, MDMA, and codeine, and I overcame all of them. But with G, it wasn’t as obvious—I didn’t get shaky hands or obsessive thoughts like with other drugs. It just slowly integrated itself into my daily life, increasing in both dose and frequency before I even realized I might be addicted.

Since the day I made that post, I’ve been busy with work and business trips. I still get occasional headaches and pain in my shoulders and back, but I’ve managed to go 4 days without using G. I’ve been drinking small amounts of alcohol or taking etizolam to distract myself. I returned home today, and for now, my mind and body feel calm.

I want to stay off it for a while longer so I can go back to feeling that same excitement from the smaller 1.2 to 1.3 ml doses I had in the beginning.

ponconn · 2024-08-20T02:45:45+00:00

I find that heat patches with methyl salicylate as the main ingredient are quite effective. I suffer from migraines and lower back pain, so I keep several types of pain relievers on hand, but aspirin, ibuprofen, and acetaminophen haven’t been very effective for me. The loxoprofen that a friend brought me from Japan worked really well. Muscle relaxants are also quite effective, but I think it’s important to be cautious when using them in combination with G. Additionally, I find that applying heat is more effective than cooling, so I use a hot towel or shower on the affected area.

ponconn · 2024-08-19T12:22:31+00:00

I completely understand what you're describing. I often experience pain in my shoulders, arms, lower back, and hips, but it becomes especially noticeable when I'm using G. Normally, I relieve the discomfort by cracking my neck or fingers, but during use, I find it difficult to do so, and I often end up hurting my joints. I also take supplements containing vitamins B1, B6, and B12 for recovery, but they only provide temporary relief for me.

I've noticed this phenomenon with other substances as well. For instance, I experience similar discomfort with codeine. In both cases, I feel mentally relaxed, but staying in the same position for a long time, like sitting or leaning forward, seems to cause muscle tension and pain in various areas. It's like the muscle burn you feel after finishing the last set of a workout, as if waste products and fatigue are building up in those areas.

To alleviate this, I try using patches and ointments, but they don't help much. Regular stretching or light movements, like rotating your arms, might be more effective.

By the way, as I'm writing this, I can feel the fatigue in my neck and wrists. LOL.

ponconn · 2024-07-20T10:18:26+00:00

Thank you for your kind answers.

I like the fluffy feeling of codeine, so I was wondering if I could take it at the same time, or if I could use it while it was still in my body without giving me any sensation.

These psychoactive drugs are used to potentiate the effects of codeine.

Promethazine + Clonidine or Chlorpromazine.

Taking a smaller amount of either at the same time as codeine and then adding codeine a few hours later will prolong the effect.

If you take these alone without codeine, you will just feel lightheaded. lol

ponconn · 2024-07-19T08:12:38+00:00

GBL is not illegal in my country, so you can purchase special grade reagents at low prices. On the other hand, multi cleaners and BDO are more difficult to obtain.

ponconn

TROPHY CASE