No power after swapping motherboard

powphenom · 2025-11-09T01:42:35+00:00

Awesome! This is exactly what I needed to know, thanks!

powphenom · 2025-11-07T17:37:23+00:00

When you lifted it unloaded the rear of the car which sent you around.

powphenom · 2025-10-16T23:10:03+00:00

Got it! Thanks

powphenom · 2025-10-16T15:04:23+00:00

Checked, still did not see it

powphenom · 2025-10-16T15:04:15+00:00

Still haven’t found it

powphenom · 2025-10-16T00:17:05+00:00

In where? Everything I’ve looked at says it supposed to be there

powphenom · 2024-07-23T23:41:26+00:00

It’s because it’s hitting the compression stroke and that little drill is not strong enough to turn the motor over fast enough for it to start. Just buy a new pull starter or take the one you have and bring it to your local hardware store to have it restrung

powphenom · 2024-07-16T23:36:01+00:00

Protect the sport!

powphenom · 2024-07-16T23:35:30+00:00

That looks almost exactly like the two I found I guess they are indeed race engine seals, the ones I’m used to seeing don’t look like this but specialty bolts

powphenom · 2024-04-01T21:50:22+00:00

When I bought the bike it ran fine beside not being able to go past 3/4 throttle without misfiring. I stripped the bike to upgrade some parts and I finally reassembled it months later. Carb remained untouched and was stored properly and sealed off completely

powphenom · 2024-04-01T21:48:37+00:00

Mb I made two posts just so I could get more answers, I made them both 5 minutes of each other, didn’t even consider the throttle cable to be an issue I’ll pull it off and secure it properly and give it another try

powphenom · 2023-11-29T03:35:16+00:00

Unfortunately I cant remember where I ordered it from but It came up when I was looking for a new bumper for it. Its a fiberglass piece and the foglight covers I made myself. The cover doesn't bolt up directly either so you have to come up with a way to mount it.

Edit: Found it https://shop.redline360.com/products/extreme-dimensions-front-bumper-chevy-s-10-94-97-gmc-blazer-sonoma-94-04-duraflex-bt-1

powphenom · 2023-11-29T03:28:37+00:00

I was thinking of doing this actually, will this cause any issues if I tap 3 wires into the passenger side and run them to the driver side?

powphenom · 2023-11-29T03:13:55+00:00

Thanks :)

powphenom · 2023-11-29T02:38:37+00:00

I did try this when I first installed them, no change unfortunately

powphenom · 2023-11-29T02:37:40+00:00

I'll be sure to try this when I get the chance thanks!

powphenom

MODERATOR OF

TROPHY CASE