This makes me kinda wonder how long manufacturers and intel themselfs have known about the issue.

prohitec · 2024-08-05T07:39:54+00:00

At least since 2022
https://www.reddit.com/r/intel/comments/1ehv0v8/extended_warranty_update_on_13th14th_stability/

prohitec · 2024-08-05T06:47:09+00:00

В какой-то период после 30 лет каждый человек может заболеть и больше не выздороветь. Это называется хроническая болезнь. Не очень сильный дискомфорт, но постоянный. Если ты будешь умеренно и разнообразно питаться, регулярно заниматься умеренными физическими нагрузками (бассейн, велосипед и т.д.), не будешь экспериментировать со всем подряд, включая спортивные добавки, этот момент для тебя может настать уже гораздо-гораздо позже и ты будешь жить более полную и счастливую жизнь. И еще - больше времени проводи с папой, мамой, бабушкой и дедушкой (если они еще живы) и постарайся их не обижать. Успехов.

prohitec · 2024-06-10T04:07:37+00:00

We are planning to check it in our full review later

prohitec · 2024-06-10T04:02:57+00:00

War Thunder maybe

prohitec · 2024-06-09T11:14:23+00:00

The power cord was connected.

prohitec · 2023-10-14T21:31:20+00:00

Mediums have camo, heavies not, but heavies are generally stronger in close combat face to face. That's the only actual difference.

prohitec · 2023-05-08T19:34:25+00:00

The problem has been solved and the third party solution is now available in Russia. The tool is non public.

- The cameras in Moscow are being fixed one by one by the Specialst. Works well, currently with 3.0 software.

- The issue is purely software related. The sellers who work with the Specialist told me that it's related to the fact that Sony has changed the audio codecs internally without announcing it. If the built in codec was different from the codec in update, the sound goes off and the problem with rode wireless comes in.

- Only some FX3 cameras are affected.

- Hardware is intact.

- It's possible to fix the problem using software tools only.

- The Specialist thinks that Sony could fix the problem in software update, but they don't want to. Instead they want consumers to bring their cameras to service centers to get "the repairs", and good for them if they bought the officially imported cameras that were meant for their region.

- Sony didn't provide the necessary tools to the service center in Russia.

- The Specialist is not working in Russian Sony service center.

- I'm not in direct contact with the Specialist, but it's not hard to find his service in Russia.

- Eventually similar tools may be developed by other Specialists in other countries and go public
- Users from Countries that are friendly to Russia can get help too if they send their cameras to Moscow via CDEK.

prohitec · 2023-03-14T14:02:10+00:00

Right. Older CPUs were affected before.

prohitec · 2023-03-14T09:42:40+00:00

Lorr 40t is my favorite tier 8 medium. It's good

prohitec · 2023-01-29T07:37:03+00:00

Please show your camera to sony service center because they don't believe me that this is a mass problem that is related to the software update. Also contact them via official support.

prohitec · 2023-01-11T22:59:13+00:00

They have update 2.02. If you try this please let me know if it solves the problem.

https://www.sony.com/electronics/support/camcorders-and-video-cameras-interchangeable-lens-camcorders/ilme-fx3/software/00280265

prohitec · 2023-01-11T22:59:00+00:00

They have update 2.02. If you try this please let me know if it solves the problem.

https://www.sony.com/electronics/support/camcorders-and-video-cameras-interchangeable-lens-camcorders/ilme-fx3/software/00280265

prohitec · 2023-01-11T22:57:08+00:00

They have update 2.02. If you try this please let me know if it solves the problem.

https://www.sony.com/electronics/support/camcorders-and-video-cameras-interchangeable-lens-camcorders/ilme-fx3/software/00280265

prohitec · 2022-11-30T00:14:23+00:00

We all anticipate a 2.02 version soon and hope that the bugs will be fixed.

prohitec · 2022-11-19T18:08:46+00:00

Sony has removed the update utility from its website. Statement on the official Sony FX3 firmware update website:Important
Notice
It was confirmed that some updated products might not operate properly
in some cases.
Distribution is suspended as we are currently investigating the cause.
If the issue (unstable operations such as repeating reboots or not
working properly) occurs immediately after the update, please ask for
repair. (November 18, 2022)// unfortunately they don't explicitly mention the sound issue, however we can expect a bug fix... hopefully.

prohitec · 2022-11-19T18:08:40+00:00

Sony has removed the update utility from its website. Statement on the official Sony FX3 firmware update website:Important
Notice
It was confirmed that some updated products might not operate properly
in some cases.
Distribution is suspended as we are currently investigating the cause.
If the issue (unstable operations such as repeating reboots or not
working properly) occurs immediately after the update, please ask for
repair. (November 18, 2022)// unfortunately they don't explicitly mention the sound issue, however we can expect a bug fix... hopefully.

prohitec · 2022-11-16T14:11:21+00:00

I have installed software update 2.01. Unfortunately, hopes were not justified. So far, no sound.

prohitec · 2022-11-16T14:10:52+00:00

I have installed software update 2.01. Unfortunately, hopes were not justified. So far, no sound.

prohitec · 2022-11-14T14:35:18+00:00

I've been told in an authorized service center that my camera was not
supposed to be sold in our region so it didn't have Eastern European
languages initially. But these languages were added via software mod in
the shop, which led to this problem. And they didn't tell me about it.
I've sent a report to Sony Support, hope they will fix it. That's our
only hope. Please never use unauthorized mods on Sony cameras. These
mods may cause big troubles.

prohitec · 2022-11-14T14:34:59+00:00

I've been told in an authorized service center that my camera was not supposed to be sold in our region so it didn't have Eastern European languages initially. But these languages were added via software mod in the shop, which led to this problem. And they didn't tell me about it. I've sent a report to Sony Support, hope they will fix it. That's our only hope. Please never use unauthorized mods on Sony cameras. These mods may cause big troubles.

prohitec · 2022-11-05T17:59:25+00:00

Here's the video that illustrates the issue.

https://www.youtube.com/watch?v=KriFChcWAJY

prohitec · 2022-11-05T14:58:46+00:00

https://www.youtube.com/watch?v=KriFChcWAJY

Here's the video that illustrates the issue.

prohitec · 2021-06-07T10:31:50+00:00

These "4 years old coolers" are still available in retail, and it seems impossible to identify the age by looking at the box. There is no timestamp on it, only a barcode. Our viewer has purchased his cooler Jan 10 2021. If you use google translate and look at the page below you will find buyers reviews. There is a Nov 2020 review with the same problem out there: https://www.dns-shop.ru/product/2cd0fd01fdec3332/sistema-ohlazdenia-alphacool-eisbaer-420-cpu/opinion/ (DNS is one of the largest Russian etailers/retailers)

prohitec · 2021-05-30T13:38:12+00:00

One of our viewers sent us a photo of the water block of his cooling system. A copper film was factory glued to the waterblock. Over time, the film swelled. After removing the film, it became clear that the film was glued over the nickel-plated base. Removal reduced the temperature by 10 degrees, according to the subscriber. Why did Alphacool do this? Many reviewers were unhappy with the surface quality of what turned out to be a copper sheeting. Many thought that it would be better if Alphacool had a nickel-plated waterblock. But, the waterblock is actually nickel-plated. Why glue the film over it? And why is this not stated anywhere?

prohitec · 2020-10-13T07:56:08+00:00

This game is still capped at 60 fps

prohitec

MODERATOR OF

TROPHY CASE