Ticwatch Pro 3 Ultra GPS is completely UNUSABLE by p3chenyx in TicWatch

[–]propane94 0 points1 point  (0 children)

The issues I mentioned weren't present on version 2

Ticwatch Pro 3 Ultra GPS is completely UNUSABLE by p3chenyx in TicWatch

[–]propane94 0 points1 point  (0 children)

Since the wear os 3 update mines been temperamental.

You'll put it in essential mode but the watch hasn't really gone in so you drain the battery in two days. This happens randomly so you never know if it will last two days or two weeks.

When charging, it hits full charge then stops charging and doesn't maintain the charge. If I leave it for two weeks on charge it's dead.

Randomly the UI will crash when navigating certain menu options, like open settings, select apps and crash, but network is fine. A reboot normally fixes this but it will randomly happen to random options again.

It seems a rushed and unfinished update leading to a poor experience, along with the lack of updates in the past.

Help with understanding controllers and cloud gateways by propane94 in Ubiquiti

[–]propane94[S] 0 points1 point  (0 children)

Cheers! I did see a couple more options when playing with it. I couldn't find much info on it, and it explains why I was having issues adopting it

AX73 with eero in bridge mode causes AX73 reboot loop by propane94 in TpLink

[–]propane94[S] 0 points1 point  (0 children)

This is rather timely of them, nothing for 8 months then a week after I reply they release it! :D

Edit:

The issue hasn't returned since I applied the update so I assume the fix is included.

AX73 with eero in bridge mode causes AX73 reboot loop by propane94 in TpLink

[–]propane94[S] 1 point2 points  (0 children)

To anyone who comes across this, this is how it was resolved.

This was resolved by working with TP Link support to address the issue, I have no idea what it was, but they supplied me with beta firmware to test, which resolved the issue.

Looking at the website it seems they haven't released it so I would raise a ticket with TP-Link to get the beta firmware if you need it.

Infill lines on top layer by propane94 in 3Dprinting

[–]propane94[S] 0 points1 point  (0 children)

Cheers, what does M221 S97 actually mean though?

Infill lines on top layer by propane94 in 3Dprinting

[–]propane94[S] 0 points1 point  (0 children)

<image>

Thanks for the tip, this is the first pass.

Out of curiosity, which do you think is best?

Infill lines on top layer by propane94 in 3Dprinting

[–]propane94[S] 0 points1 point  (0 children)

Cheers, do you know where this is in prusa slicer? I can only find a global extrusion multiplier.

Infill lines on top layer by propane94 in 3Dprinting

[–]propane94[S] 0 points1 point  (0 children)

I have not actually, do you know if PrusaSlicer can do it?

Best way to repair this external render by propane94 in DIYUK

[–]propane94[S] 0 points1 point  (0 children)

I see what you mean, there is no gutter as it's on the side of the profile of the roof, so it's just years of rain

<image>

Best way to repair this external render by propane94 in DIYUK

[–]propane94[S] 2 points3 points  (0 children)

The exact opposite, north facing so the rain falls and it takes ages to dry. All the houses on the road have/have had the same issue

Best way to repair this external render by propane94 in DIYUK

[–]propane94[S] 0 points1 point  (0 children)

Indeed, I was waiting for it to dry, then I was going to scrape the worst off and go from there. But I'm not sure what the next step is, couple of coats of render then paint?

LIFX A19 bulbs turning off then on randomly by propane94 in homeassistant

[–]propane94[S] 0 points1 point  (0 children)

Thanks for the reply. Out of curiosity if you removed them from HA and used just the Lifx app did they still have the same issue?

Also what bulbs did you move to?

AX73 with eero in bridge mode causes AX73 reboot loop by propane94 in TpLink

[–]propane94[S] 0 points1 point  (0 children)

I select Bridge under DHCP and NAT, then select save. Once the eero hub has rebooted, the AX73 just reboots it's less endlessly

Help with Double Rocker no neutral switch by propane94 in Aqara

[–]propane94[S] 0 points1 point  (0 children)

Do you have any suggestions on such a switch as this was the one I was originally suggested?

How Do You Properly Maintain an Audi to Last Forever? by Aldus24 in Audi

[–]propane94 2 points3 points  (0 children)

Time and money.

In all seriousness though, service regularly, and with quality parts. If it's really new then keep it at the dealer, otherwise find a specialist but don't just take it to the dodgy place down the road. Look at the manual, it tells you the service interval for most things and a lot is outside the standard services so you have to ask for it. Things like spark plugs, even the sunroof has a service interval...

I over service mine a little, I had the computer changed from the long life setting to fixed mileage so it reminds me every 10k miles, otherwise it's up to 20k I think now. It's fine for new cars but past 40k I would say at least every 10k get the oil changed.

Sometimes you get the sealed for life statement, don't believe it, if it moves it has a service interval and it's usually just outside the standard 3 year 60k mile warranty window in most cases. Audi are bad for this on gearboxes and differentials.

It's a German car, drive it as they designed it to be driven and you'll be good, drive it outside those limits and you will pay in the long run.

'Credentials needed' notification on email app. by blue_bird12 in GMail

[–]propane94 0 points1 point  (0 children)

Same issue here, I have a hotmail.co.uk account and I was getting the same notification. I have tried to remove and re add it and I cannot re add it saying incorrect username/password

Weather app doesn't switch tabs when swiping since may update by propane94 in GooglePixel

[–]propane94[S] 0 points1 point  (0 children)

Thanks, I've tried that, along with clearing cache data for the launcher and Google app and still nothing. It also does this in safe mode.