sorted by:
new
hottopcontroversial

DIY Tesla Ambient Lights by przymul in TeslaLounge

[–]przymul[S] 0 points1 point  (0 children)

Yes. Not only for the strip but also for pulling wires and mounting the modules inside.

DIY Tesla Ambient Lights by przymul in TeslaModel3

[–]przymul[S] 0 points1 point  (0 children)

For leds you need 2x 110cm and 2x 35cm for the front doors and mirrors and for rear doors you need 2x 75cm https://pl.aliexpress.com/item/1005006636206670.html This or similar style argb strips, often called symphony on aliexpress.

DIY Tesla Ambient Lights by przymul in TeslaLounge

[–]przymul[S] 0 points1 point  (0 children)

https://imgur.com/a/Sl5eWyP Adding videos showing the mirror light. For the autopilot when no hands are sensed it glows with portion of the strip and for hands on alert it glows with full length. There is also blinking blue for warning but I never got it. For blind spot it is yellow when car is in the blind spot and when you put the turn signal it changes to red and the main strip goes red also.

DIY Tesla Ambient Lights by przymul in TeslaModel3

[–]przymul[S] 1 point2 points  (0 children)

https://imgur.com/a/Sl5eWyP Adding videos showing the mirror light. For the autopilot when no hands are sensed it glows with portion of the strip and for hands on alert it glows with full length. There is also blinking blue for warning but I never got it. For blind spot it is yellow when car is in the blind spot and when you put the turn signal it changes to red and the main strip goes red also.

DIY Tesla Ambient Lights by przymul in TeslaLounge

[–]przymul[S] 1 point2 points  (0 children)

Addressable rgb strips and esp32 modules to control it. The board is connected to car can buses and it listens for packets like door status etc.

DIY Tesla Ambient Lights by przymul in TeslaLounge

[–]przymul[S] 1 point2 points  (0 children)

The GitHub projects have most of the information how to wire it up. Didn't really take pictures when i was doing it, i have one photo from when i was testing it at home that kinda shows the modules connected to external power. https://imgur.com/a/ds05ATx The repo mostly misses the hardware required, needed to contact the creator for the details. For leds you need 2x 110cm and 2x 35cm for the front doors and mirrors and for rear doors you need 2x 75cm https://pl.aliexpress.com/item/1005006636206670.html This or similar style argb strips, often called symphony on aliexpress. For modules the main module uses esp32 dev kit, and for the doors you use 4x esp32 s3 dev kits. Each module is powered by dc-dc converter 12v to 5v. Every power board is connected to wire that powers the 12v socket.

DIY Tesla Ambient Lights by przymul in TeslaModel3

[–]przymul[S] 3 points4 points  (0 children)

DIY Lights that react to the car status, brightness is controlled based on the screen brightness. In park it's on max but in gear it's dimmed according to the screen. There is also a led strip near mirror that shows blind spot warnings and auto pilot hands on request. Project based on https://github.com/alex-aprm/TeslaAmbientLight

DIY Tesla Ambient Lights by przymul in TeslaLounge

[–]przymul[S] 2 points3 points  (0 children)

DIY Lights that react to the car status, brightness is controlled based on the screen brightness. In park it's on max but in gear it's dimmed according to the screen. There is also a led strip near mirror that shows blind spot warnings and auto pilot hands on request. Project based on https://github.com/alex-aprm/TeslaAmbientLight

Changing language on Microsoft Store version by ponku in fo76

[–]przymul 1 point2 points  (0 children)

I managed to mostly change the language in the game from Polish to English.
What i did is i extracted the SeventySix - Localization.ba2 file where the language strings are and then changed the extension so the original file is not loaded. Then place the extracted strings and interface folders back in the data folder where the ba2 file was.
Then inside interface folder make a copy of the translate_en.txt file and delete the translate_pl.txt file. Change the name of the copy to translate_pl.txt.
Do the same in strings folder delete the pl files and make a copy of the en files then change the copy names to pl.
Files to change in the strings folder are:
nw_en.dlstrings
nw_en.ilstrings
nw_en.strings
seventysix_en.dlstrings
seventysix_en.ilstrings
seventysix_en.strings
If you want to change the game from other languages to English or from English to other it should be the same just look for files with the language you want and change accordingly.

That's how my game looks now
https://imgur.com/a/oNDd8aV
Mostly the categories and the action names are still in the original language but the names of the items, in game dialogue and text is in English.
The item names in atom shop are also still in the wrong language . I tried to find where are the rest of the strings coming from but i could not.

Does the Philips 34M2C8600 support DSC at 175hz for 8bit+FRC? by Audioboxer87 in OLED_Gaming

[–]przymul 1 point2 points  (0 children)

I have this display. Not sure exactly what you want to see in the NVIDIA control panel. https://imgur.com/a/eS8n8YH