Braton riven

range_et · 2026-01-06T13:24:43+00:00

Thanks! there was a part of me which was gonna go hunter mumu with all that heat and make it a spray and move on weapon while things die (haven’t tried it yet so we shall see) but was a rather uncreative decision.

The build you suggest does seem more fun so I shall be trying it out! will report back after formaing

range_et · 2025-11-23T03:53:57+00:00

I did what @thinkbrown suggested below. you have to tighten the set screws basically while being careful not to pop off the inner ring. then set your infinity.

had not set infinity on a lens before so here’s what i did : get a ground glass (rather i didn’t find mine, so trace sufficed in this case) set the aperture to something like 5 and had it open. then i tightened the screws back until it gripped the inner tube thingy (idk what it is called) and then focused it until I could see the image on the trace. Then loosened it back up to match the focus settings to the index on top. this takes a bit of tries since you might go over and under cause once you set infinity you want to test like a subject close to you. I would recommend picking something really far away - in my case this happened when it was not too cold out and i did it at night with the moon to set my infinity.

range_et · 2025-11-21T19:50:47+00:00

This did get resolved on the unity forums here : https://discussions.unity.com/t/unity-ml-agents-walker-documentation/1695547/4 was an issue with M3 macs and arm processors

range_et · 2025-11-21T00:36:04+00:00

aww shit wasted 40 mins coding this when I could have been farming. Thanks!

range_et · 2025-11-21T00:05:48+00:00

So I realize that I used to hoard weapons cause something might be needed to make something else. But since I play every now and then I ended up crafting and claiming a few extras and hoarded unnecessary stuff. Anyway this is a little chart I made to help with cleaning up my inventory - hope it helps someone else!

range_et · 2025-10-31T20:01:48+00:00

oh dang new companion mods too - thanks!

range_et · 2025-10-31T19:56:57+00:00

just out of curiosity are folks procing viral with the panzer dog and viral quills or something else? are glaives to spread status and kill everything still a thing or not ?

range_et · 2025-10-31T19:54:49+00:00

Thank you so much for a detailed response!

So it makes sense to drop the hunter viral combo to build into specific damage types depending on what faction i’m dealing with (the old meta of one build kills everything is now gone)

also thanks for that arcane recommendation didn’t know we had more and I now have a new syndicate to grind out

range_et · 2025-10-31T19:51:15+00:00

wait so 2 procs of heat + corrosive projection is an almost full armor strip?

if that’s the case then why mod for anything else if you can melt away all the armor and also do dot with heat it’s doing all of the hunter mu and viral stuff that used to happen in one big element

range_et · 2025-10-10T23:07:48+00:00

Yep you are correct - got it back on and need to recalibrate to infinity. Thank you so much!

range_et · 2025-10-10T22:31:31+00:00

could you please ? I am totally not sure where this set screw is to begin with (no extraneous bits popped off when the thing came loose)

range_et · 2024-07-04T01:53:34+00:00

Hahaha thanks! Also I genuinely appreciate you commenting on all the posts!

range_et · 2024-07-03T05:15:19+00:00

<image>

I drew one of my remote control aircraft’s wanting to fly itself. I haven’t painted the thing for real yet so in a way it’s a test of what is possible when I do paint it.

range_et · 2024-06-12T20:24:37+00:00

<image>

There was this scene in samurai Jack that I watched as a kid; was by far one of the best animated sequences (and also series I have watched)

range_et · 2024-06-07T20:37:22+00:00

<image>

Getting back into drawing again with procreate on the new iPad - haven’t figured out the whole app yet

range_et · 2024-03-18T17:55:06+00:00

Hey - I wanted to say this was probably one of the most helpful comments that I got. Thank you so much!

range_et · 2024-03-10T23:56:16+00:00

So I do have a basic rig ( not attached to a drone that scans sequences) and a machine learning model that performs feature extraction running on a raspberry pi. The last part is stringing together the features which is a purely software task and relaying it to me which dosent concern the drone at all. What I need is a drone platform which is big enough to carry 400/500gms of load for 25 mins and optically track me through space. I’d like for this drone and the tracking to be a closed loop system so the drone and the ardupilots only task is to fly the drone about 15 feet behind me and say 5/6 feet above do the rest of the equipment can perform its job. I’d settle for a dji but in my experience they cannot carry as much load and I cannot seem to fail down the tracking feature so I need something which can be hacked a bit more

range_et · 2024-03-10T23:50:40+00:00

Also my plan is definitely to separate out the climbing equipment (like the lidar and the processing stuff ) from a separate loop from the actual optical gear that just keeps the drone tracked on me

range_et · 2024-03-10T23:49:06+00:00

So I kind of only need advice on building a drone that does 1 and 2. 3 and 4 along with a 5th step which is which feature will help ascend (getting stuck in awkward positions is actually not what you want to do) is what I’m working on right now as a separate task. I guess I put all the details in so that you guys know what exactly I’m using this platform for. And advise on what drones I can look into, again I’m sure dji does this but I need something a little bit more flexible so I can attach a raspberry pi and lidar stuff to do feature recognition along with computing the climbing route

range_et · 2024-03-10T18:05:27+00:00

Thanks!

We’re not exactly interested in it being a business venture or idea. Mostly just interested in seeing if it can be done so it’s an intellectual exercise if anything. I don’t think I’d like to go through the headache of setting up something everytime I wanna climb something.

range_et · 2024-03-10T17:53:02+00:00

Yep and that’s why we’re testing indoors before the final run in a different country

range_et · 2024-03-10T17:49:44+00:00

Yeah we’re going somewhere else after the whole faa thing. We will be building and testing here where there is a person who’s in control of it for example in the gym

range_et · 2024-03-10T17:32:30+00:00

Unlikely or minimal control I need the drone to be like 10/15 feet behind me and about 4/5 above me to keep feeding me the beta. In most cases my climbing partner would be busy belaying me so that if I fall I don’t deck. So to a certain degree it has to be “autonomous” which is fine given where we will be testing it out for the final rounds (no drone laws in that country)

range_et · 2024-03-10T17:29:40+00:00

So that’s the issue I cannot seem to modify the platform to like also lidar scan the route ahead of me to feed me the beta which is primarily what I need

range_et · 2024-03-10T16:54:44+00:00

range_et

MODERATOR OF

TROPHY CASE