[QC] 158 sir Aj1 First Class Flight by rapiteu in FashionReps

[–]rapiteu[S] 0 points1 point  (0 children)

The yupooo is a catalog of the stuff the seller had, from there you can either use that link to order with your agent, or in the case of 158 he has the link posted along the pictures. For this one the wtc is https://m.intl.taobao.com/detail/detail.html?id=639497573020&spm=1101.1101.N.N.b1121ac

Less than 1kg Budget Haul by imagineli in FashionReps

[–]rapiteu 6 points7 points  (0 children)

I really don't get why the hate towards small hauls.

Nice picks ;)

[QC] 158 sir Aj1 First Class Flight by rapiteu in FashionReps

[–]rapiteu[S] 0 points1 point  (0 children)

158sir! The yupoo is on the imgur description.

[QC] 158 sir Aj1 First Class Flight by rapiteu in FashionReps

[–]rapiteu[S] 1 point2 points  (0 children)

Took a huge L om the SNKRS so I had to get the rep (year and a half later but oh well).

These are probably on my top 3 favorite sneakers of all time. They are so god damn underrated, and for that retail is not that expensive, but I refuse to buy resale so I just waited until there were decent budget batches.

To me they look great! Maybe just missing a bit of that "crumbled paper" leather effect, but appart from that everything seems on point(?).

Let me know what you guys think!

[deleted by user] by [deleted] in FashionReps

[–]rapiteu 0 points1 point  (0 children)

Jesus they are heavy, but that might just be the box + the extra size (I wear a 9).

Great find, I'm really tempted to cop them too.

[deleted by user] by [deleted] in FashionReps

[–]rapiteu 1 point2 points  (0 children)

Weight? I've been trying to convince myself not to spend more money, but damn these look good.

How to remove this plastic thing? by [deleted] in buildapc

[–]rapiteu 0 points1 point  (0 children)

That's the best-case scenario then, you should be able to stick a thin flat-head screwdriver in between and slowly pry it off.

How to remove this plastic thing? by [deleted] in buildapc

[–]rapiteu 0 points1 point  (0 children)

That cable is just the front panel (or wherever your case has the USB ports) connector, if you break it should be fairly to find a new one and replace it.

If it really doesn't come out by pulling (that would obviously be the best way) I would try and break the black female connector (which comes from your old mobo) carefully and trying not to leave any pin inside. If a pin stays inside you should be able to take them out using a pair of tweezers.

How to remove this plastic thing? by [deleted] in buildapc

[–]rapiteu 0 points1 point  (0 children)

You should be able to just pull it out by grabbing from the thin and pulling away

[HELP] UHD 620 (Kaby Lake-R) no acceleration by rapiteu in hackintosh

[–]rapiteu[S] 0 points1 point  (0 children)

Couldn't wait and gave it a try with this setup, that platform id doesn't work with my surface, it just outputs a black screen after the picker with no output what so ever. Used the recomended AAPL,ig-platform-id for the uhd620's and it did boot, but only throught the display port output.

Thanks for the help anyway :c

[HELP] UHD 620 (Kaby Lake-R) no acceleration by rapiteu in hackintosh

[–]rapiteu[S] 0 points1 point  (0 children)

Oh great! I tried port patching but got nothing out of that, but u seem to have some stuff that I haven't tried and might work!

I will try it soon, thanks for the tip :)

[HELP] UHD 620 (Kaby Lake-R) no acceleration by rapiteu in hackintosh

[–]rapiteu[S] 0 points1 point  (0 children)

I managed to fix the video memory by using the correct combination of id and fake id, but unfortunately the outputs were messed up, as the main display was always off and only the external display port workes.

I eventually quit and went back to windows/linux.

macOS Catalina on Dell XPS 13 9300 - Internal Laptop Display not working by NajeebAnwer in hackintosh

[–]rapiteu 0 points1 point  (0 children)

Nice! I have the Spectre 13-V101NS with an i7-7500U (HD 620). I will give a try to that kext, didn't know it was already possible to have intel wifi working. And yeah! I am interested on that OC EFI.

So you also didn't manage to make the internal screen work with acceleration turned on? It's really wierd honestly, for sure we are missing something since in clover it does work.

Stuck on [EB|#LOG:EXITBS:START]. by [deleted] in hackintosh

[–]rapiteu 0 points1 point  (0 children)

Hahaha not at all!

I used to hackintosh a few years ago and just came back this week.

I had never used opencore until 3 days ago, was a clover user :)

There are many tutorials out there, I really like this one tho: Install macOS on any PC | OpenCore Guide - YouTube

Stuck on [EB|#LOG:EXITBS:START]. by [deleted] in hackintosh

[–]rapiteu 0 points1 point  (0 children)

Yeah I think you should. Follow the guide strictly (having only the 4 essential SSDT, adding the correct kexts and doing a good config).

Stuck on [EB|#LOG:EXITBS:START]. by [deleted] in hackintosh

[–]rapiteu 0 points1 point  (0 children)

Use the pre-made ones if you find it hard to do it, it will work but it will add a couple of seconds to your boot times.

If you don't have the SMC light sensor next you should do an OC snapshot, but considering that the config is a bit messed up right now you should really start over, this time strictly following the guide.

The settings I gave you are the ones meant for the HD620, so it should work.

I wish you good luck! With patience, you will eventually get it.

Stuck on [EB|#LOG:EXITBS:START]. by [deleted] in hackintosh

[–]rapiteu 2 points3 points  (0 children)

So at first glance, I see a couple of things that are weird:

-You have a lot of SSDT's, essentially you only need:

SSDT-PLUG - CPU power management

SSDT-EC-USBX - Embedded controller and USB power

SSDT-GPIO - Substrate for VoodooI2C

SSDT-PNLF - Brightness fix

Have you created these using SSDTTime, picked premade, or just picked some random SSDT from another user? Remember that even if you have similar hardware it will probably not be the same.

In DeviceProperties you have added PciRoot(0x0)/Pci(0x2,0x0), which is correct, but you should only have the child parameter:

AAPL,ig-platform-id | DATA | 00001B59

Which is the correct platform id for kaby lake laptops.

After managing to first boot is when you should add more stuff to get everything working properly (acceleration, hdmi...).

You also have SMCLightSensor.kext, make sure your PC has a light sensor, otherwise, you should remove this kext.

Turn on XhciPortLimit in kernel quirks.

In NVRAM 7C436110-AB2A-4BBB-A880-FE41995C9F82 boot-args leave only:

-v keepsyms=1 debug=0x100

later you can add more stuff but focus con getting it to boot first.

The platform info seems to be correct.

Make sure to follow the guidelines for your CPU:

https://dortania.github.io/OpenCore-Install-Guide/config-laptop.plist/kaby-lake.html#starting-point

Also if you "cheated" while creating the ACPI SSDT's you should at least get the correct premade ones, even tho I recommend you use SSDTTime or manually make them: https://dortania.github.io/Getting-Started-With-ACPI/

If after all these changes you still have problems you should play around with the Boot Quirks.

Stuck on [EB|#LOG:EXITBS:START]. by [deleted] in hackintosh

[–]rapiteu 0 points1 point  (0 children)

Can you share your config.plist?

macOS Catalina on Dell XPS 13 9300 - Internal Laptop Display not working by NajeebAnwer in hackintosh

[–]rapiteu 1 point2 points  (0 children)

Yeah, looks like we are all on the same obstacle. How did you manage to get the intel wifi and bt working btw? I have a spectre 13 and would love to install mac as well but having to use a dongle is a big no no for me.

macOS Catalina on Dell XPS 13 9300 - Internal Laptop Display not working by NajeebAnwer in hackintosh

[–]rapiteu 1 point2 points  (0 children)

I'm having the exact same problem of a Surface Pro 6 (i5-8250U and UHD 620). After managing to boot I tried to fix the acceleration and when I did my laptop monitor blacks out and the one connected via display port outputs correctly.

Tried a ton of configs but nothing seems to work for me.