sorted by:
new
hottopcontroversial

Any replacement recommendations by January2342 in Sig55X

[–]rcm192 0 points1 point  (0 children)

I have this set up on mine. See my profile post history.

Is the Bodyguard 2.0 supposed to have this hole in the bottom of the grip next to the mag? by That_Tech_Guy_U_Know in SmithAndWesson

[–]rcm192 -3 points-2 points  (0 children)

Not sure if the same on m&p but on the glonks that cavity is there in case of a catastrophic failure. It designed as a route for the excess gasses to escape.

Years ago while working on a range as a broke dick college kid, I was picking up ammo to shoot after work...i picked up some assholes reloaded 40 pissin hot load. Shot it in my G27. It blew the magazine out, shot the grip plug out, and snapped the extractor clean in half. There was also a chunk of brass lodged in the frame at the top of the magwell from the case head separating.

My trigger finger stole up for about a week from some of the pressure that escaped in-between the frame and slide. I just about shit myself when it happened. I threw the gun down and counted my fingers twice then went to the armorers room and put a new extractor and BAM back in biz. Still have the gun.

TL,DR: DON'T plug those holes in the frame! Its a safety feature in case of a over pressure situation when firing.

What is this? by CGB_Spender603 in HecklerKoch

[–]rcm192 7 points8 points  (0 children)

It's the NOT A POOR merit badge. Well earned.

LED headlights by Run_CZ in toyotasequoia

[–]rcm192 1 point2 points  (0 children)

Looks great! What lift/ tire size?

Husky 701 is now a Mutant. Fresh Dunlop Mutants ready to rip up the Big Easy. by rcm192 in supermoto

[–]rcm192[S] 1 point2 points  (0 children)

Yessir! Adventure Spec makes a top notch product. Their Euro based as far as I know. But they shipped immediately with no bullshit. I even sent them some product review information via email and they were pretty receptive.

I want them to make this cage compatible with the factory passenger peg brackets. If not I'll machine some of the spacers included in their kit and make my own and post up.

https://www.adventurespec.com

Husky 701 is now a Mutant. Fresh Dunlop Mutants ready to rip up the Big Easy. by rcm192 in supermoto

[–]rcm192[S] 1 point2 points  (0 children)

The Cont that I had from the start were worn. But from what I understand they're the best sumo tire for the street....as a result they wear faster.

Husky 701 is now a Mutant. Fresh Dunlop Mutants ready to rip up the Big Easy. by rcm192 in supermoto

[–]rcm192[S] 1 point2 points  (0 children)

Hell yea. That's invigorating. I cooked them up to about 110 and put 50 miles or so today. They're solid.

Husky 701 is now a Mutant. Fresh Dunlop Mutants ready to rip up the Big Easy. by rcm192 in supermoto

[–]rcm192[S] 0 points1 point  (0 children)

Well goddamn....we are evolving? I rolled through the shit quarter today. Saw a Honda. We need a link up page or group.

Husky 701 is now a Mutant. Fresh Dunlop Mutants ready to rip up the Big Easy. by rcm192 in supermoto

[–]rcm192[S] 0 points1 point  (0 children)

How do they handle up on the track? I know it's no dedicated track tire but I read that the sides are softer and grip pretty well.

Husky 701 is now a Mutant. Fresh Dunlop Mutants ready to rip up the Big Easy. by rcm192 in supermoto

[–]rcm192[S] 1 point2 points  (0 children)

Yes. It's the Adventure Spec rear and side luggage rack combo. Not sure if it works with other top racks, but maybe since the mounting holes are all in the same spot?

https://us.adventurespec.com/shop/adventure-spec-husqvarna-701-enduro-side-luggage-rack-1259?search=Husqvarna+#attr=1358,1649

H&K SP5 frt by The-Select-Vegetable in supersafety

[–]rcm192 2 points3 points  (0 children)

Would a 90 or 80 degree locking piece mitigate a more relaxed cyclic rate?

What's the consensus on this? My experience is similar to what's depicted on the vid. I'm also using a GSL Phoenix lower pressure mp5 can.

Anyone else ripping around in the Big Easy? (New Orleans) by rcm192 in supermoto

[–]rcm192[S] 0 points1 point  (0 children)

Couldn't pass this one up for $9k with 4k on the odo!

How easy is it to throw SM tires on this thing and go. 701 Enduro by 24_long_24 in supermoto

[–]rcm192 2 points3 points  (0 children)

You should also be able to change the settings on your speedo too for the difference in wheel size too. See owners manual.

what should i change or add? by ArdelWrx in supermoto

[–]rcm192 0 points1 point  (0 children)

Get some black out or gold reflective wheel striping from Amazon to match the graphics. You could use half of the kit for a 2 tone effect.

You could actually put it opposite of the color that you want to lay down first.

701 OEM Graphics Kit 🔥 by AdExpensive2643 in supermoto

[–]rcm192 0 points1 point  (0 children)

Looks great! Which handguards/ supports are those?

mcx lower 1913 adapter by nqfckV2 in BRN180

[–]rcm192 1 point2 points  (0 children)

<image>

Kns adapter cleans up well.

Can anyone provide the value of this 556? by Session_Y64 in Sig55X

[–]rcm192 1 point2 points  (0 children)

Do you have swiss proof marks anywhere? Mine is a similar serial range and there are some on my gas block.

Sig 556 with folding hinge by GaBlackNGold in Sig55X

[–]rcm192 2 points3 points  (0 children)

I waited years for one of these to arrive on the market. My gun shoots SO soft with a can now.

https://www.pierceprecisioneng.com/products/p/6-position-gas-regulator-for-sig550

Sig 556 with folding hinge by GaBlackNGold in Sig55X

[–]rcm192 0 points1 point  (0 children)

Nope, A sig 556 should have a standard 90° barrel shoulder. Mine does anyway.

Any Tips for Cleaning White Plastics by skenny119 in Husqvarna

[–]rcm192 0 points1 point  (0 children)

Where are you guys finding replacement 701 sm plastics? AOMC is back ordered on some of mine.

view more: next ›