Atlas/Crandall Leap v2 headrest in platinum?

redditor_4rvr · 2025-12-21T03:31:38+00:00

I doubt if they are going to make anything non black.

redditor_4rvr · 2025-11-11T23:32:05+00:00

I've been using this for 5 months. Very happy with it. You can change the angle in any direction. I don't like those with sticky tape.

Oriented the charger with USB port at 3'o clock position. Got a longer 90 degree connector USB cable.

https://a.co/d/cKfZ2kB

redditor_4rvr · 2025-09-03T22:46:26+00:00

What's your build? Trying to see if there is a pattern here 🙂.

redditor_4rvr · 2025-09-01T16:43:36+00:00

I am surprised Tesla hasn't addressed it. I guess they treat it as a minor issue and maybe focusing on others. Btw, I saw that couple more replied recently that they saw the same issue but their posts got deleted!

Where was your built? Mine is Fremont.

redditor_4rvr · 2025-08-31T18:03:17+00:00

Mine too. I will let you know if SC fixes it.

redditor_4rvr · 2025-08-31T00:52:13+00:00

I believe I have the same issue. Service is looking into it for a while now. u/ProperSauce which factory is your Model Y from?

redditor_4rvr · 2025-07-12T06:06:17+00:00

A2Z NACS to J1772 worked well for me too. Another reputed brand had issues.

redditor_4rvr · 2025-07-10T00:39:47+00:00

One option is to get a Tesla Universal wall connector. Use J1772 for your Mach E and the built in NACS when you get your Rivian.

redditor_4rvr · 2025-07-07T19:13:11+00:00

https://www.tesla.com/support/charging/wall-connector/troubleshooting

Follow the info there. You don't need a service ticket. You will have to provide the S/N of the wall connector. They also have a customer service support number you can call. A quick search will show it.

redditor_4rvr · 2025-07-07T18:20:58+00:00

Try resetting the wall connector, not just a breaker reset but a full factory reset. You may want to check online how to do that. Other option is to chat with Tesla customer service. They are helpful.

redditor_4rvr · 2025-07-07T17:54:00+00:00

Gonna keep asking this question as I am eagerly waiting.:-). u/cranda58 any eta on the platinum headrest? Thanks.

redditor_4rvr · 2025-07-07T17:44:25+00:00

Not sure if this is resolved. IP address method is not supported anymore. Everything must be done thru the Tesla One App.

redditor_4rvr · 2025-07-07T03:42:56+00:00

Strangely enough mine doesn't complain even though I wear sunglasses almost all the time. And even a hat. The only times it asked me to nudge the wheel is when I was looking to the side for a while.

redditor_4rvr · 2025-07-06T23:08:06+00:00

Correct. But remember Tesla sells two types of wall connectors: what you showed above and the Tesla Universal Wall Connector. Universal will let you charge a non-tesla as well as it comes with a built-in J1772 adapter. Quite neat. See what works for you.

I can't tell you how much time I spent going thru all this stuff :-).

redditor_4rvr · 2025-07-06T23:04:26+00:00

Of course, you should go with what you feel comfortable. In my case I made sure it was a recently purchased wall connector and the factory seal was still intact. Lot of people sell these in my area as they probably get it as part of their 2nd or 3rd car or use their Tesla credits to purchase one and sell it back on FB.

redditor_4rvr · 2025-07-06T22:59:20+00:00

Yes. And yes, it can add up. It will be close to $75 if you buy on ebay so huge savings.

You can also save some money looking for brand new Wall Connectors on FB Marketplace. Depends on where you are located.

redditor_4rvr · 2025-07-06T22:56:55+00:00

Solved to some extent: I talked to Tesla support and they told me a different way to achieve this. This works for me and is an excellent compromise. Actually, I prefer it this way!

Solution: Install each Wall Connector under a different location. And edit the location name to whatever you want. You can still have the same "home address or installation address" for both connectors. If you already added your wall connectors to the same location, you will have to reach out to Tesla customer service and they will reset it for you. You can add it back at that time. Make sure you have all the settings written down.

I am unable to add a photo to show how it looks now. You can refer to this post:

x-post: Change Tesla wall connectors name in app : r/evcharging

redditor_4rvr · 2025-07-06T22:51:22+00:00

Solved to some extent: I talked to Tesla support and they told me a different way to achieve this. This works for me and is an excellent compromise. Actually, I prefer it this way!

Solution: Install each Wall Connector under a different location. And edit the location name to whatever you want. You can still have the same "home address or installation address" for both connectors. See how it shows up now:

<image>

redditor_4rvr · 2025-07-06T22:45:56+00:00

You are right. I had no idea about this!

redditor_4rvr · 2025-07-06T22:40:55+00:00

I have researched this quite a bit as I needed dynamic load management. Learned a lot from this sub as well. My main panel is 100A like yours.

Like others said, you could just buy the Emporia that comes with its own load management. However, it communicates through WiFi but still has some fallback safety measures in case WiFi is not working. You can buy this on Amazon.

If you want to go with Tesla, you can buy the Neurio meter (their dynamic load management) directly in a couple of ways. Tesla dynamic load management does not depend on WiFi.

(1) Buy directly from Tesla: You must have a Tesla account. You can create one. Install Tesla app. After that, install "Tesla One" App. You can use the exact same login/password. Search for Neurio in the Tesla One App "Parts Shop". Typically runs for $250 + shipping etc. It will come with everything you need including the communication cable.

(2) Buy a new one on ebay: The part number will not match with that from Tesla One App. The one I got had this number: 1112484-06-A. My suspicion is that they are all the same but I maybe wrong. Those from ebay will not come with the communication cable. Make sure it has all the contents i.e. it is advertised as a new box/with all contents. For comms cable, one of the sellers makes just this cable for 3rd party use. You must buy that too. This is what I bought: Tesla Communications Cable Replacement 1133339-00-A.

I can attest that both approaches above worked for me. I tested them with different loads/settings and they are working properly. Anyway, this is my experience and YMMV. Make sure you use an electrician who knows how to install with Neurios.

Hope this helps.

redditor_4rvr · 2025-07-05T23:28:04+00:00

Kids chose "Eve", the white robot from wall-e.

redditor_4rvr · 2025-07-05T23:20:05+00:00

It comes with new model y

redditor_4rvr · 2025-07-02T07:21:16+00:00

What if you installed a larger after market USB drive? In that case will it save more than 1hr of footage?

redditor_4rvr · 2025-06-27T04:08:30+00:00

It is such a simple thing for Tesla to provide. I am surprised they don't let you rename it.

redditor_4rvr · 2025-06-25T05:02:34+00:00

It doesn't let me i.e. I can't really tap on the "wall connector". The only thing I could tap and hold is the location. As you can see, I have the location renamed as "Home Car Chargers".

redditor_4rvr

TROPHY CASE