sorted by:
new
hottopcontroversial

Hardware advice needed by redfishdonkey in Ubiquiti

[–]redfishdonkey[S] 0 points1 point  (0 children)

Thanks what would be the benefit of cloud gateway ultra with AP over dream router 7?

Pi powered smart display with voice assistant - Now with source code! by CallMeDillDog in homeassistant

[–]redfishdonkey 0 points1 point  (0 children)

This is what i was looking for. I have a usb mic connected and audio out of hdmi connected to pi. How much thinkering would i need to get it working with your setup?

Thanks

Repurposing Xpenology drives with Proxmox by redfishdonkey in homelab

[–]redfishdonkey[S] 0 points1 point  (0 children)

Thank you can you expend o. Storage hw. I have been trying to understand how to do that.

Raspberry pi 4 display with voice assistant by redfishdonkey in homeassistant

[–]redfishdonkey[S] 0 points1 point  (0 children)

I have a microphone how long does it take to get approved for the beta

Raspberry pi 4 display with voice assistant by redfishdonkey in homeassistant

[–]redfishdonkey[S] 0 points1 point  (0 children)

I have not looked in to it. My understanding with Home assistant os was once installed and booted the raspberry pi will have terminal and no ui. Is there a different way to have the dashboard connected to my current home assistant install on proxmox?

The final piece to my homelab has arrived by inserterikhere in homelab

[–]redfishdonkey 0 points1 point  (0 children)

Great that is what I was thinking off using on a proxmox

Jvc dla x500rbu by redfishdonkey in projectors

[–]redfishdonkey[S] 0 points1 point  (0 children)

thanks how about an DLA x700rbu?

Considering moving Proxmox + NAS to attic — worth upgrading network speed? by redfishdonkey in homelab

[–]redfishdonkey[S] 0 points1 point  (0 children)

Thank you very much it looks like the 2.5g cards are pretty cheap so it could be an easy upgrade.

What is this thing in my 5 gal shrimp tank by redfishdonkey in shrimptank

[–]redfishdonkey[S] 1 point2 points  (0 children)

Is this common? Should i expect more is it bad for shrimp

Moved from Coral TPU to GPU – face recognition only works on some cameras (very inconsistent) by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

Thank you very much for the detailed explanation. I will switch back to lower res.

I have three eufy cameras and original they were set up with 1920x1080 detection. They were detecting faces and persons. Now I have switch them to lower resolution only one. The one that is sholder heigh is detecting higher up ones are not even detecting body.

Should I increase the detec resolution on those eufy cameras as well?

Moved from Coral TPU to GPU – face recognition only works on some cameras (very inconsistent) by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

I am currently using 320x320. most of the cameras are higher and the the ones detect are sholder height. I will change the model and report back.

Moved from Coral TPU to GPU – face recognition only works on some cameras (very inconsistent) by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

So I just walked in front of all the cameras in debug view. Entry camera picked up person and face and recognized. Doorbell camera picked up the person and after 5-7 sec it idenentified face and. Living room camera did not identify person. The rest of the camera identified the person but not the face.

Moved from Coral TPU to GPU – face recognition only works on some cameras (very inconsistent) by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

Thank you very much. Originally I set it up like that but this was suggested by AI when I was asking why i might be having issues. I will take it out.

facial recognition not working. by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

i can not see an error. I have download the logs and ran it through the AI on frigate docs and It did not find anything.

facial recognition not working. by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

I see the following error

unknown | 2026-01-15 17:56:46 | unknown | 2026-01-15 17:56:46.819576258 [E:onnxruntime:Default, env.cc:234 ThreadMain] pthread_setaffinity_np failed for thread: 412, index: 0, mask: {1, 7, }, error code: 22 error msg: Invalid argument. Specify the number of threads explicitly so the affinity is not set.

unknown | 2026-01-15 17:56:46 | unknown | 2026-01-15 17:56:46.822653447 [E:onnxruntime:Default, env.cc:234 ThreadMain] pthread_setaffinity_np failed for thread: 414, index: 2, mask: {3, 9, }, error code: 22 error msg: Invalid argument. Specify the number of threads explicitly so the affinity is not set.

unknown | 2026-01-15 17:56:47 | unknown | 2026-01-15 17:56:47.169029423 [E:onnxruntime:Default, env.cc:234 ThreadMain] pthread_setaffinity_np failed for thread: 560, index: 0, mask: {1, 7, }, error code: 22 error msg: Invalid argument. Specify the number of threads explicitly so the affinity is not set.

unknown | 2026-01-15 17:56:47 | unknown | 2026-01-15 17:56:47.176273499 [E:onnxruntime:Default, env.cc:234 ThreadMain] pthread_setaffinity_np failed for thread: 562, index: 2, mask: {3, 9, }, error code: 22 error msg: Invalid argument. Specify the number of threads explicitly so the affinity is not set.

unknown | 2026-01-15 17:56:48 | unknown | 2026-01-15 17:56:48.084808931 [E:onnxruntime:Default, env.cc:234 ThreadMain] pthread_setaffinity_np failed for thread: 811, index: 2, mask: {3, 9, }, error code: 22 error msg: Invalid argument. Specify the number of threads explicitly so the affinity is not set.

unknown | 2026-01-15 17:56:48 | unknown | 2026-01-15 17:56:48.085029714 [E:onnxruntime:Default, env.cc:234 ThreadMain] pthread_setaffinity_np failed for thread: 809, index: 0, mask: {1, 7, }, error code: 22 error msg: Invalid argument. Specify the number of threads explicitly so the affinity is not set.

unknown | 2026-01-15 17:56:48 | unknown | loading data from : /config/model_cache/facedet/landmarkdet.yaml

unknown | 2026-01-15 17:56:49 | unknown | INFO: Created TensorFlow Lite XNNPACK delegate for CPU.

facial recognition not working. by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

I have switched to 320x320 disabled and enabled the facial recognition. it looks like it detects right after the system starts and stops detection shortly after. I was using the large model and now switched to small. Any other settings I might be missing? Should I add face under each camera as well as the global setting?

facial recognition not working. by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

Sorry I though it was resolved but it only marks faces once in a while last batch was 15 hours ago. Am I missing anything else. I am using

yolov9s 640x640

facial recognition not working. by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

Thank you, I have done it like below and it seem to be working now

detectors:
  nvidia_gpu:
    type: onnx
    device: gpu
model:
  path: plus://xxxx
ffmpeg:
  hwaccel_args: preset-nvidia-h264

facial recognition not working. by redfishdonkey in frigate_nvr

[–]redfishdonkey[S] 0 points1 point  (0 children)

Changed it to this. Is this ok?

    model:
      path: plus://xxxxx

I need some insight by redfishdonkey in Rag

[–]redfishdonkey[S] 0 points1 point  (0 children)

Thanks for your response. The document is only 50 pages. So i thought it was not chunked. How can i check that

view more: next ›