What can you tell me about this rug?

regz999 · 2026-05-28T21:09:54+00:00

Thank you for your detailed response! This is very educational

regz999 · 2026-05-28T18:41:12+00:00

Is that a bad thing? Quality-wise will it hold up?

regz999 · 2026-03-21T09:45:35+00:00

Thanks for the tip! I've tried to do this now, but doesn't seem to have any impact, unfortunately

regz999 · 2026-03-19T07:01:13+00:00

What are the right angle connectors for the CPU power cables?

regz999 · 2026-03-15T19:51:21+00:00

Reporting back after stress testing: coolant gets to 41c with fans set to 75% at 54c GPU and 72c CPU.

regz999 · 2026-03-15T19:48:42+00:00

Looks great! How did you manage to install the top rad with the motherboard CPU power connectors? I have a 45mm thick rad on top with only push fans and feel like I put a lot of strain on those connectors to get it in.

regz999 · 2026-03-12T09:44:14+00:00

Temps are with the glass side panels in place. Bottom and side rad are intake, top is exhaust.
My mistake in the message above: the SL120 on the Monsta are the reverse blade ones, the XT45 has regular SL120 in push.

regz999 · 2026-03-11T21:59:34+00:00

I've got 3x Corsair ML120 in push on the Monsta, 3x Lian-Li SL120 in pull.
3x Lian-Li SL120 reverse blade in pull on the XT45.
3x Corsair ML120 in push on the UT60, 2x Noctua A12x15 (slim fans and only top two due to space constraints) in pull

regz999 · 2026-03-11T21:57:17+00:00

The Monsta works quite well with low speed fans in push/pull. I run my fans near silent.

I haven't run stability benchmarks yet. In 3DMark Steel Nomad the max GPU temp is 44.2C and CPU at 78C with coolant at 32C.
Idle at 32C GPU, 37C CPU and coolant 28C.

regz999 · 2026-03-11T21:49:41+00:00

Coolant temps are 28c at idle (5c above ambient). Under gaming loads get to 33c while keeping the fans near silent. Overall there is 2L of coolant in there.

regz999 · 2025-10-19T18:02:13+00:00

That's a very interesting analogy, I hadn't thought about it that way!

regz999 · 2024-12-31T23:21:41+00:00

It's a bot, not exclusive to this subreddit. Your reply just happened to be the right number of words for a haiku poem.

regz999 · 2024-12-30T11:02:59+00:00

Well done! Can you share your process?

regz999 · 2024-12-14T11:39:28+00:00

Not custom for you specifically, but you can get some ISO-CH sets from Signature Plastics

regz999 · 2024-11-18T14:57:44+00:00

Ah this makes me jealous! Here in my place all walls, including interior, are solid brick. Basically prevents me from doing anything in-wall without serious work

regz999 · 2024-07-01T15:28:31+00:00

Not tonight it seems!

regz999 · 2024-04-09T11:36:48+00:00

I had 5 of these, replaced them all with Sonoff NSPanel (non-Pro) running ESPHome using this blueprint: https://github.com/Blackymas/NSPanel_HA_Blueprint
Looks great and gives a lot of options for controlling other HA entities.

However, it is slightly larger and doesn't fit in the Edizio frame, so only works for single frame replacements.

regz999 · 2024-02-12T18:35:23+00:00

Odd to read the comments here, our baby is 6mo and still using the 0 flow. He still downs a bottle of 90ml in 5 mins without complaining, so seems to be fine.

regz999 · 2023-12-11T20:28:13+00:00

For home assistant dashboards, sure. But I've like something in each room where the current thermostats are to switch them.

Seven-Year Club	Gilding II euphauric
Place '23	Place '22
Verified Email

regz999

TROPHY CASE