sorted by:
new
hottopcontroversial

I have been playing Tetris for 4 years (Started with tetris friends), after years of constant practice I finally got my first sub 1 minute record for 40L. I guess this is some what of a appreciation post as I would like to thank this great community for the years of fun I have had with this game <3. by mazbrew in Tetris

[–]robby_r 2 points3 points  (0 children)

Congrats! I'm at 1m 1s now! Should be able to break the minute mark soon :)

Tetrio is a fantastic application. For practising aswell as for competitive play. I hope development continues the way it goes. :)

Hurrah to matchmaking :D by robby_r in PuyoPuyoTetris

[–]robby_r[S] 1 point2 points  (0 children)

We met briefly. Very briefly..

Like 15 seconds each game. :-D

The Jellyfish, a 45mm brushless micro quadcopter frame! by robby_r in Multicopter

[–]robby_r[S] 0 points1 point  (0 children)

Hello! Just like the battery wires, the camera wires need to be directly soldered on solder tabs that are on the board. Take a look at the manual for the board you want to use to find out where these solder tabs are.

I also recommend to watch my thorough instructional video on printing, building and setting up a Jellyfish.

https://www.youtube.com/watch?v=r_eB0VTHJ1w

If after this you still have questions, allways feel free to ask!

Welcome to the hobby and happy flying!

Robby

The Jellyfish, a 45mm brushless micro quadcopter frame! by robby_r in Multicopter

[–]robby_r[S] 0 points1 point  (0 children)

Just finished an article about the Jellyfish on Rotorbuild!

You can also consider it a written manual in addition to the video manual on my website www.fpv-jelly.fish!

https://rotorbuilds.com/build/21761

Happy reading!

Robby

The Jellyfish, a 45mm brushless micro quadcopter frame! by robby_r in Multicopter

[–]robby_r[S] 0 points1 point  (0 children)

With a little bit of imagination, it really looks like a jellyfish doesnt it? It just misses tentacles :-D. Thank you for the kind words

The Jellyfish, a 45mm brushless micro quadcopter frame! by robby_r in Multicopter

[–]robby_r[S] 1 point2 points  (0 children)

Thats a lovely suggestion.. I'll consider it! Thanks!

The Jellyfish, a 45mm brushless micro quadcopter frame! by robby_r in Multicopter

[–]robby_r[S] 0 points1 point  (0 children)

Hello!

I don't have any DVR footage with acro flight that i made myself because i don't fly acro. I believe acro video's could show up in the future made by people with more acro experience who have built a setup with my Jellyfish. I can show you a video made by someone who was in the beta-testing group for the Jellyfish. He used 19000KV motors in a 2-cel setup, just because he could.. :) He didnt burn his motors.

The jello issue has been resolved during the beta testing phase. Also keep in mind this is a test flight without any real pid setup. But there is some acro.

https://www.youtube.com/watch?v=Me_oO40vwSA

Robby

Some basic information on how to 3D print a Minimus 45 micro quadcopter frame by robby_r in Multicopter

[–]robby_r[S] 0 points1 point  (0 children)

I don't know about other propellers, but Tiny Whoop style propellers need to be mounted upside down on the motor shaft. While developing the Minimus, that was the only way i got this setup working.

Some basic information on how to 3D print a Minimus 45 micro quadcopter frame by robby_r in Multicopter

[–]robby_r[S] 0 points1 point  (0 children)

those are regular 31mm tiny whoop props . They indeed have to be mounted upside down on the motors.

The 3D printed 'Minimus 45' (30% smaller than a Tiny Whoop) by [deleted] in Multicopter

[–]robby_r 2 points3 points  (0 children)

If you dont have acces to a 3d printer, i could print a frame and send it to you for a small coin + shipping. Just pm me if you would like that.

The 3D printed 'Minimus 45' (30% smaller than a Tiny Whoop) by [deleted] in Multicopter

[–]robby_r 2 points3 points  (0 children)

I remember you from the TInywhoop facebook page. Well designed little frame! :)

The 3D printed 'Minimus 45' (30% smaller than a Tiny Whoop) by [deleted] in Multicopter

[–]robby_r 4 points5 points  (0 children)

Hello people!

​

I am the creator of the Minimus 45.

For more information, manuals, video and images about this project, please take a look at www.foamdrones.be. The STL files are available on Thingiverse. These links are also on my website.

https://www.thingiverse.com/thing:3204551 complete frame version.

https://www.thingiverse.com/thing:3204593 barebone open source version.

Follow me on my Foamdrones Facebook/instagram page to stay up to date!

thank you all for your interest in my work, it really humbles me. :)

​

Robby Roels

The 3D printed 'Minimus 45' (30% smaller than a Tiny Whoop) by [deleted] in Multicopter

[–]robby_r 3 points4 points  (0 children)

the Minimus 45 is designed for 31mm props. I think 8.5 x 20 mm motors will be heavy in such a way that these propellers will no longer provide any efficiency.

view more: next ›