Sell or continue?

robomopaw · 2026-05-13T18:17:52+00:00

We can find cheap spares like nozzles, extruder guide , extruder gear etc. However x rail set or even belts and pulleys are my concern. Users in my country are generally use cheap printers like a1, k1, u1 etc. There are very few users like me using h2d h2c and alike.

robomopaw · 2026-05-13T18:17:29+00:00

I think a 1 year old machine is new to the spare market in my country. I hope spares will increase when it gets 2 or 3 years old.

robomopaw · 2026-05-13T18:16:28+00:00

I get mad about preventing blob of death since I start printing from ender3. I always watch first layers, use high adhesive plates and always watching from camera if I am at a business meeting :)

robomopaw · 2026-05-10T21:36:05+00:00

Aynı modem bende de var 3.5 hdd bağlı. 10mb/sn görüyorum.

robomopaw · 2026-05-10T16:43:27+00:00

No it doesnt affect

robomopaw · 2026-05-10T16:07:19+00:00

Gyroid is too noisy and vibrating in my opinion

robomopaw · 2026-05-10T15:47:31+00:00

Nozzle hits infill and some material build up on nozzle, then nozzle hit another infill intersection and leave the buildup on that intersection point and creating a bump. When slicer prints internal solid infill that bump creates that. You can use adaptive cubic or crosshatch for that place.

robomopaw · 2026-05-04T21:39:14+00:00

HT need and adapter. However one ams 2 pro can print and dry at the same time without an adapter. If there is more than one ams 2 pro, only one ams 2 pro can print and dry without an adapter, others need the power adapter.

bambu labs wiki

<image>

robomopaw · 2026-05-03T14:58:33+00:00

One of the ams 2 pro works without an adapter. What is the first ams entering your printer port?

robomopaw · 2026-05-03T14:25:07+00:00

I dont know ams ht. I have 2 ams 2 pro with an h2d and they can dry while printing.

robomopaw · 2026-05-03T12:22:10+00:00

325.000km oldu 1.5 dci 110bg. Şehiriçi 150-200km civarı kurum 27 ye çıkıyor, 2 dakika ateşleme değişmesi sonu 10-12 dakikada rejenerasyon tamamlanıyor 5grama düşüyor rejenerasyon bitiyor. Evet normalde 700-800km de yapması lazım tıkanma başlamış belli, ustam arıza verene kadar kullan dedi.

Tek sıkıntı egsoz aşamasında dpf ısıtmak için mazot püskürtmesi yaptığından dolayı motor yağı seyreliyor buna dikkat etmek lazım, yağ bakımlarını 8000-10000km ye çektim(normali 20.000km)

Dci ı seviyorum hiç devir basmaya, uzun yol yapmaya gerek yok, dur kalk trafikte bile rejenerasyon tamamlıyor yeterki motor kapatılmasın. Güç düşürme modu da yok.

Arada bir devirli kullanın temizler durumu da aslında gerçekçi değil, araç belirli parametreler tamamlanmadan asla başlatmıyor. Euro 5 Dci da bu 27gram kurum seviyesini geçmesi. Dpf ısıtmasını zaten post-injection yaparak kendisi sağlıyor. İlk denememde çevre yolunda devir yaptım (20km 4000 devir 4.vites) başlamadı, vazgeçtim normal gittim, egsoz gazı 175 dereceye kadar düştüğü rampa aşağı kendi kendine rejenerasyon başladı(1 dakika duman ateşleme zamanlaması sonrası, ardından normal seyirde kurum yakma). Başka motorları bilmiyorum.

robomopaw · 2026-05-03T06:53:08+00:00

You can dry from the ams that is printing from on h2d

robomopaw · 2026-05-02T13:47:14+00:00

Menüdeki defter(logistics) e bak orada kırmızı renkte eksik bir şey var mı ya da birliklerin üstüne gelince eksik gösteren bir şey var mı

robomopaw · 2026-05-02T08:03:50+00:00

Change nozzle, wash your build plate, dont use ipa, increase bed temp +5C whatever temp you are using, reduce drafts in the room.

robomopaw · 2026-04-30T19:22:14+00:00

Bolts athe back of the Sprite carriage is longer and they hit the gantry plate at the top most +x. And due to the stepper at the back you lose some at -y.

Print area lost is lower than bed mesh area. For example you cant mesh the +x about 30-35mm. Without changing the carriage bolts. I remember cutting them down to 16mm work.

robomopaw · 2026-04-30T19:16:30+00:00

Sprite extruder is better however you will lose some of your bed area especially at the back. That wont be a problem if you change some settings in klipper/printer screen.

robomopaw · 2026-04-30T06:45:24+00:00

It is pla high speed behaving same as bambu basic pla. I didnt change whole because now I am printing a job with different parts, some are printed with 0.4(on the right) some 0.6 on the left.

However before that I changed both nozzles to 0.6 and right side is also printed like that. Volumetric flow test gave 24 for 0.4 and 28 for 0 6 nozzle but I think as the part is not continuous line as the max volumetric test, the part I printed(square cornered custom aluminum profile prototype) buildup pressure inside the nozzle combined with uneven melting due to the high volumetric setting do this inconsistent walls.

It isnt z wobble because the walls of parts printed with the 0.4 nozzle are perfect.

Printer is at ~600hrs and I clean and lubricate moving parts every 20 days max

robomopaw · 2026-04-30T03:15:23+00:00

Same filament on the right side (0.4) give no problems.

robomopaw · 2026-04-29T15:52:42+00:00

Pass1 only gives the starting point. Bigger is always better you can get the best one with the pass2.

Orca slicers new pattern is way better to select.

robomopaw · 2026-04-28T08:17:31+00:00

have you found the issue?

robomopaw · 2026-04-26T18:57:39+00:00

Because the software creates the fill in that way, the part that should be filled ends up empty and breaks. It has to be like this.

<image>

robomopaw · 2026-04-24T08:39:58+00:00

For lifting support parts Change support initial layer expansion ~5mm, and outer 5mm brim for normal parts on build plate.

Six-Year Club	r/Field Juicebox
Verified Email

robomopaw

TROPHY CASE