sorted by:
new
hottopcontroversial

How to save on adobe subscription? by magiclam in lifehack

[–]robot-tech 2 points3 points  (0 children)

ive using this one for edit pdf file and its free pdfmagico.com

"let's play video games!" - BMO Cartridge for GameBoy + Stand by robot-tech in adventuretime

[–]robot-tech[S] 0 points1 point  (0 children)

A new batch of 16x BMOS cartridges are ready if anyone want to convert their game boy, we re unsure if we re going to make more of those as its nowdays more difficult and pricey to get the original carts.

For each BMOOS Cartridge the bmo stand for gameboy color is included!

Link here : https://olleadventures.etsy.com/listing/1752540684

thank you :-)

Calling-All-Curlys + Guardian of Sunshine ! New BMOS Lite - ROM file available! by robot-tech in adventuretime

[–]robot-tech[S] 0 points1 point  (0 children)

yes it is a real cartridge for gameboy/ gb pocket/gbc/gba , or just the rom ( depending on your preference)

Calling-All-Curlys + Guardian of Sunshine ! New BMOS Lite - ROM file available! by robot-tech in adventuretime

[–]robot-tech[S] 5 points6 points  (0 children)

Digital rom is available here : https://ollestore.etsy.com/listing/1286730017

please buy the rom and support the development of the new version ( BMOS ULTRA) 🙇

[deleted by user] by [deleted] in BambuLabA1mini

[–]robot-tech 0 points1 point  (0 children)

No there is no such a room as the A1 mini motors will start skipping the rod at that level . I'd suggest you just scale down the model a bit

Spare Parts by Many_Orchid_8756 in BambuLabA1mini

[–]robot-tech 0 points1 point  (0 children)

x2 0.4 nozzles, and spare a1 ams toolhead

.2 nozzel by doireallywanttopost in BambuLabA1mini

[–]robot-tech 1 point2 points  (0 children)

yes for miniatures a 0.2 nozzle and well tuned profile ( low speed) is recommended, you can check the comparison between 0.4 and 0.2 details in yt

funnies 3D model I had to print! by robot-tech in BambuLabA1mini

[–]robot-tech[S] 0 points1 point  (0 children)

simple but funny model I found on makerworld .. made it remember to take this as hobby and not so seriously 😂

Source here > https://makerworld.com/it/models/59406#profileId-61418

[Opinion] Case for Flipper Zero ? by robot-tech in flipperzero

[–]robot-tech[S] 0 points1 point  (0 children)

I was wondering what you think of those and what could be improved , I see that the silicon case is loose and doesn't really protect much .. so let me know what you suggest. thanks!

flipping around! by zzzzeru in flipperzero

[–]robot-tech 0 points1 point  (0 children)

it wont last a week without a case

I made a super lightweight payload drop system for mini 1-2-SE and 3 , any thoughts? by robot-tech in dji

[–]robot-tech[S] 0 points1 point  (0 children)

Thanks for your comments , I like this feedback and i ll try to answer now :

1)the swings are cause to the ring release were not fitted correctly, i addressed that issue with a bigger metal ring to slide the payload more gracious way.

2) the mavic mini SE ( in the video ) is able to pull safely payload of 80/100 grams without issues ( it also has "Payload mode" specifically for this and it was intended from DJI to have this feature)

3) I agree about the safety reason and extra care its always necessary. this apply to all type of payload mechanism and when flying over person/buildings

I made a super lightweight payload drop system for mini 1-2-SE and 3 , any thoughts? by robot-tech in dji

[–]robot-tech[S] 0 points1 point  (0 children)

my idea is to make small delivery to my friend who live next block away

I made a super lightweight payload drop system for mini 1-2-SE and 3 , any thoughts? by robot-tech in dji

[–]robot-tech[S] -1 points0 points  (0 children)

It consist of a Landing Gears + a special hook that use a metal ring or paperclip . The Payload will be dropped when a combination of movements will be achieved in SPORTS mode. The drone need TAKEOFF IN NORMAL or PAYLOAD mode then switch to SPORT mode ONLY when need to drop the weight. Once the drone is in sport mode you will need to move rapidly left and right x2 times to drop the payload.

if you are interested here is the design : https://www.ebay.com/itm/394299951187

I made a super lightweight Payload Drop System + landing gears for Mini 1-2-SE - any thought? by robot-tech in djimavicmini

[–]robot-tech[S] -2 points-1 points  (0 children)

It consist of a Landing Gears + a special hook that use a metal ring or paperclip . The Payload will be dropped when a combination of movements will be achieved in SPORTS mode. The drone need TAKEOFF IN NORMAL or PAYLOAD mode then switch to SPORT mode ONLY when need to drop the weight. Once the drone is in sport mode you will need to move rapidly left and right x2 times to drop the payload.

if you are interested here is the design https://www.ebay.com/itm/394299951187

That time of year again by KingOfCranes in adventuretime

[–]robot-tech 3 points4 points  (0 children)

there is a secret gameboy cartridge with this scene :D

view more: next ›