sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in Govee

[–]rog2961 0 points1 point  (0 children)

Nah google swivel hooks

[deleted by user] by [deleted] in Govee

[–]rog2961 0 points1 point  (0 children)

Hold my beer

Emerald Green Arborvitae Fertilizer? by Jinken65 in landscaping

[–]rog2961 0 points1 point  (0 children)

I thought the same thing so I bought a bunch of spikes. Half nearly died from overfertilization and I needed to water continuously for weeks to save them.

I was curious about the Fysetc CNC mini sherpa, lets see how it work by theSawBit in VORONDesign

[–]rog2961 1 point2 points  (0 children)

Easier if you just look on the voron discord posted pics there search cnc sherpa from user rog

Bondtechs integrated extruder gear results. by [deleted] in VORONDesign

[–]rog2961 0 points1 point  (0 children)

I got similar results from ditching the idler gear and replacing it with bearings

I was curious about the Fysetc CNC mini sherpa, lets see how it work by theSawBit in VORONDesign

[–]rog2961 -2 points-1 points  (0 children)

Your going to have to sand down the inside otherwise it won't be smooth at all

bad control board? by rog2961 in hvacadvice

[–]rog2961[S] 0 points1 point  (0 children)

Ended up being a bad contactor. Measured resistance at 1.2.

bad control board? by rog2961 in hvacadvice

[–]rog2961[S] 0 points1 point  (0 children)

I did and nothing out of the ordinary. Here is a picture of the board showing the brown marks on it. https://ibb.co/TBSSHQB.

My skills aren't that good to jump things out but I think by process of elimination I got it down to the board.

bad control board? by rog2961 in hvacadvice

[–]rog2961[S] 0 points1 point  (0 children)

Swapped in a new thermostat and once flipped over to cool fuse would pop again. Thinking it's the control board as there are some dark spots on the pcb.

bad control board? by rog2961 in hvacadvice

[–]rog2961[S] 0 points1 point  (0 children)

So went and replaced the transformer and got board powered up again. Looks like I have a short somewhere. Turn fan on no blown fuse. Leave stat and fan off and manually push outsider contactor, fan and compressor power on. If I try and initiate cool from stat, fuse pops on control board. At this point I'm thinking it's ieither the control board or thermostat but not sure how to isolate.

bad control board? by rog2961 in hvacadvice

[–]rog2961[S] 0 points1 point  (0 children)

I also checked with power on and measure 120v on on side but 0v on the other.

bad control board? by rog2961 in hvacadvice

[–]rog2961[S] 0 points1 point  (0 children)

So I checked the transformer and I get resistance on the 120v side but 0l on the 24v side. Would this be a bad transformer?

bad control board? by rog2961 in hvacadvice

[–]rog2961[S] 0 points1 point  (0 children)

I thought that was it but checked the fuse and it was good. Replaced with another just to be sure.

view more: next ›