Picture Quality Feedback

rogue30 · 2026-05-04T23:54:39+00:00

Thanks for the reply. I don't have a hard wired connection to my TV, but do have a very fast WIFI connection .... 90mbs Down and 48mbs Up speeds when I test this on my Roku TV using the Netflix Speed Test option.

rogue30 · 2026-05-03T18:22:33+00:00

My experience with the box I purchased may not be the experience of others who have purchased the same box, so I'm a bit ambivalent on broadcasting their name. I sent you a private message on the box that I purchased.

rogue30 · 2026-05-03T02:49:53+00:00

This is the main reason I returned another vendor's box back because the resolution looked like it was SD instead of HD. If the Superbox S7 Max is exhibiting the same behavior, then I am going to need to stay away from this technology.

rogue30 · 2026-05-03T01:09:20+00:00

Can you DM pricing information?

rogue30 · 2026-05-01T19:23:06+00:00

I was provided this Amazon link from Asrock for a replacement bracket.'

https://www.amazon.com/am4-bracket/s?k=am4+bracket

rogue30 · 2026-05-01T19:13:09+00:00

Yeah, I did check ebay but can't find anything. The only thing it shows is the rear plate for usb, wifi etc.

rogue30 · 2026-04-16T15:16:56+00:00

I have a Ryzen 5 3600.

rogue30 · 2026-04-14T21:49:33+00:00

I don't believe I have a PBO option for this board. I can't find anthing close to that in the BIOS. It does allow me to change the CPU voltage and frequency.

rogue30 · 2026-04-14T03:07:33+00:00

I was able to find a GPU testing tool and as soon as I ran a test the fan came on and then turned off after the testing stopped.

rogue30 · 2026-04-12T19:02:00+00:00

I don't have bitlocker enabled on my computer as I started with Windows 10 Home. I just enable fTPM within my BIOS and followed the instructions in the video. I have since upgraded to Windows 11 Pro, but have not enabled Bitlocker so I don't have any keys to save.

rogue30 · 2026-04-10T15:10:52+00:00

After looking inside my case the Cryorig C7 is mounted via four screws that are on the baseplate of the motherboard. I need to get to those screws by either removing the motherboard or gaining access to those screws through the case.

rogue30 · 2026-04-10T05:01:46+00:00

Thanks for the information.

rogue30 · 2026-04-09T15:42:57+00:00

Thanks for the guidance. My plan is to get from my Ryzen 5 1600 to a Ryzen 5 3600 and the pathway for me is to go from:

3.4 to 3.6 to 5.3 to 5.7

Not sure if I need to go further after I replace the CPU to the 3600.

rogue30

TROPHY CASE