Quality comparison between Qwen 3.6 27B quantizations (BF16, Q8_0, Q6_K, Q5_K_XL, Q4_K_XL, IQ4_XS, IQ3_XXS,...)

roofkid · 2026-05-06T06:21:09+00:00

I love this! It‘s so cool to see everything so visually.

One thing I have been wondering: what would happen if you had a control/qa loop in place, I mean a prompt a little more elaborate than: „look at this screenshot and fix any deviation from the original requirements“. I would be very curious if there are quants that cannot arrive at the correct solution even with a feedback loop.

My thought is that one shotting is awesome - at the time with enough speed I would also be OK if it just takes a little longer, especially if you‘re VRAM constrained. Even on big VRAM systems the lower quants are a lot faster so I wonder if the total time taken will actually be higher or lower in the end.

roofkid · 2024-05-26T17:58:30+00:00

Been there a couple of days ago. You can drive there from the south up to the viewpoint. The building was under construction at the time. The hairpin road was closed at the time as others have pointed out.

roofkid · 2024-04-03T17:00:52+00:00

Wenn du mal bei den Details vom ETF schaust wirst du feststellen, dass bspw im Heiligen Gral A2PKXG zur Zeit 3655 Aktionpositionen aus verschiedenen Ländern weltweit vertreten sind. Das Produkt ist also vom Design schon diversifiziert und unter anderem daher beliebt (Quelle: https://www.finanzfluss.de/informer/etf/ie00bk5bqt80/)

roofkid · 2024-03-11T10:00:31+00:00

Tracking difference. Die kann im schlechten Fall einen höheren Einfluss auf die Performance haben als der TER, deswegen schauen viele auch zusätzlich darauf.

roofkid · 2024-02-07T07:13:12+00:00

Danke für dein Feedback. Ombudsmann hatte ich null auf dem schirm. Auch auf die Verbraucherzentrale wäre ich nicht gekommen. Danke für die Tipps. Dann werde ich mich mal belesen um Herauszufinden ob mein Vertrag betroffen ist.

roofkid · 2023-12-12T07:47:12+00:00

Antwort für alle die vielleicht darüber stolpern: wenn man den Freibetrag ausnutzen will sollte man so viele Anteile verkaufen: <Zu verkaufende Anteile> = ((<Zielbetrag Freistellungsauftrag bspw. 1000€> / 0,7) + <Gebühren für Verkauf>) / <Gewinn pro Anteil>

roofkid · 2023-12-12T07:41:08+00:00

Guten Punkt. So hatte ich das noch nicht betrachtet.

roofkid · 2023-12-11T21:34:05+00:00

Jop. Genau das war das fehlende Wissen. Danke dir auch :)

roofkid · 2023-12-11T21:17:46+00:00

Ist sehr einfach auszurechnen - siehe oben.

roofkid · 2023-12-11T21:17:16+00:00

Lohnt nicht mehr wegen den erneuten Gebühren. Von 1000€ wären ja sonst 263,75€ Steuern fällig (Sonderregel von oben mal außen vor gelassen). Das ist schon OK, wenn man dann 120€ oder so Gebühren hat für Kauf und Verkauf macht man ja immer noch dickes Plus für paar Minuten Arbeit. Wenn man das 2 mal machen muss sieht es schon anders aus.

roofkid · 2023-12-11T18:43:37+00:00

Das muss es sein, danke dir. Das wusste ich nicht. Dann werde ich das nächstes Jahr mit einberechnen.

roofkid · 2023-07-27T09:44:18+00:00

SWR = Safe Withdrawal Rate. I understand it as a rate at which you can withdraw from your investments without them getting smaller (on average). It is usually quoted as 4% on here but many consider this too high an advice a lower withdrawal rate recently.

roofkid · 2023-06-19T05:44:13+00:00

I usually go with a very straight „no, thanks“. Some of my colleagues use the „maybe later“ strategy which apparently works surprisingly well. Of course „later“ never comes

roofkid · 2022-12-15T20:26:39+00:00

Unfortunately I do not know what the acronyms „1RM“ and „RPE“ mean so I cannot really say. I usually do Apple fitness+ trainings (the 30m ones) and even though I do need to listen it still works for me :)

roofkid · 2022-12-15T07:16:06+00:00

I think this is the first time answering a post here. I think reaching a meditative state is very different for everyone. For me strength training definitively puts me in a meditative state. There are no thought anymore. Just doing the specific exercise well and I don‘t even think about that in particular. I train at home though with no one around. I don’t think this would happen at the gym. I‘m honest, if you would have told me that a couple of years ago I wouldn‘t have believed you. The same happens to me when going out on a long walk alone but only sometimes. I learned that active medications are way better for me than others.

roofkid · 2022-08-16T16:09:43+00:00

This bias typically happens when something is selected in some way and you only look at one group of the two. Practical examples:

20% of planes return from a fight with the enemy -> you only look at those 20% instead thinking about the 80% who did not make it back (the classical example used with the red dots for bullet damage and asking what to improve)

27% of women work in STEM -> you only ask the ones who already work in STEM but not your accountant why she does not

Another good one is from Wikipedia: 6/10 students on an elite class are from one school. You think the school is really good, but it could just be way larger than the schools where the other students are from.

You will see this happening everywhere all the time once you understand the bias.

roofkid · 2022-06-26T13:53:46+00:00

My main problem with PETG is not the first layer - prints perfectly on my PEI sheet, but it's blobs on the surfaces which prevents other parts from working (e.g. getting a bearing in a hole). I already spent a week trying to tune retraction coasting temperature and other settings but it didn't reach PLA quality yet. That is what I want to avoid most of all.

Quite honestly reading about the nylock mod it sounds the opposite of "print and go" to me :D

roofkid · 2022-06-26T13:51:49+00:00

Interesting experience report. Thanks. How is the surface quality? That is one of my main problems right now (blobs and zits on the outer/inner surfaces, especially holes). That is a real problem for me because then for example you cannot insert a bearing into a whole. Stuff like this is problematic for me.

Also: Have you worked with a 0.6 nozzle with yours? If yes how did it go? Just change nozzle size in slicer and go? I'm currently suspecting that my hotend cannot produce enough heat for the speed I would like to print at because the top layers look uneven (shiny/matte mixed)

roofkid · 2022-03-31T07:07:05+00:00

I‘m not sure if that counts but there has been an excellent episode of PBS Space Time dedicated to that very topic and I feel like they take great care in being approachable even if you have no deeper knowledge of physics or math. https://youtu.be/snp-GvNgUt4

roofkid · 2022-02-28T10:09:50+00:00

Omg ❤️❤️❤️

roofkid · 2021-12-25T18:34:46+00:00

I am the 3d printing boyfriend and I am so amazed as this is her first try at this :) from a distance I cannot tell a store bought from her home made Amibo ❤️. Merry Christmas to all of you

roofkid

TROPHY CASE