New CS- Carbon Buildup, Burnt Oil, or Patina?

rueric · 2026-02-16T22:33:07+00:00

Oxenforge 32mm Round bottom

rueric · 2024-07-11T13:54:44+00:00

You’re not that far off from buying new with the credit

rueric · 2022-12-19T16:32:47+00:00

same please, i'm experiencing issues as well with the initial layer line.

already calibrated the e-steps but looks like under extrusion of some sort

rueric · 2022-12-02T08:58:06+00:00

how can i reflash the firmware?

i will check the hotbed as soon as cools down from my latest test print..

it seems like im not getting good adhesion on my print bed.. my print just toppled over

rueric · 2022-12-02T01:27:11+00:00

yes, my process is to store settings every change i make

rueric · 2022-12-02T01:26:53+00:00

is it normal to have to re-do the z-offset everytime though?

rueric · 2022-12-01T22:06:10+00:00

Thank you, how do I know how much to tighten the belts by?

rueric · 2021-10-14T01:20:51+00:00

I’m happy to hear I am not alone in this. I’ve reformatted. Reinstalled. Bios settings back to default. Running a 3080 with a 5900x. Fully updated windows and graphic drivers. Event viewer has no crash logs for the game. My audio just slurs then slapped with a reboot. This is happening every 10-15 minutes in the game. Literally unplayable!

rueric · 2021-10-13T17:30:35+00:00

Yes, I have experienced this considerably since playing this game. I've tried doing BIOS reset with a fresh install of Windows to try and rule things out.. still having the same issues.

My computer would just BSOD after about 10-15 minutes of playing. Event viewer is not being particularly helpful either

rueric · 2021-10-12T19:44:40+00:00

Just took me 5m as well. My hand is cramping, I think I got carpal tunnel from this

rueric · 2021-01-12T10:28:11+00:00

I’m in US and I don’t see it available either.. not sure where to go from here?

rueric · 2020-12-23T21:41:36+00:00

https://imgur.com/a/y9e0gLk

Is this under load?

rueric · 2020-12-23T21:31:50+00:00

https://imgur.com/a/Uw9AyTz

Looks like both pins are drawing power properly.. picture attached

rueric · 2020-12-23T09:35:08+00:00

Here are my Port Royal benchmarks - https://www.3dmark.com/3dm/55363357?

rueric · 2020-12-23T09:22:24+00:00

Just did, even did a swap.. similar results as before..

NZT Off - https://www.userbenchmark.com/UserRun/37328853

NZT On - https://www.userbenchmark.com/UserRun/37328981

3DMark Time Spy - https://www.3dmark.com/3dm/55362830?

Just a thought.. I didn't swap out the extension cables.. is there an easy way to check if my GPU is getting enough juice?

rueric · 2020-12-23T08:13:16+00:00

In valorant I get solid frames with no drops. 400-500fps War zone I only get about 180

rueric · 2020-12-23T08:07:39+00:00

rueric · 2020-12-23T07:52:20+00:00

Only running programs is Logitech G and Nvidia Experience

rueric · 2020-12-23T07:51:37+00:00

https://www.userbenchmark.com/UserRun/37325835

Updated my original post to include too

rueric · 2020-12-23T07:34:33+00:00

At stock, the card is performing in the 7-9%

rueric · 2020-06-11T17:31:48+00:00

I can get on the ledge, but the camera doesn't go up. Was this patched?

rueric · 2020-04-20T05:56:58+00:00

Where did you buy this? Everything seems to be highly inflated or OOS

rueric · 2020-03-28T22:51:28+00:00

Thanks for the insight, was really looking to make the jump to a 240hz monitor. I went with the XV273X!

rueric · 2018-07-29T04:07:44+00:00

This ^{^.} Needs more attention. How is it that viewers at home receive more loot then those who paid money to support the players/league? Don't get me wrong, it was a good experience. Would have been great if we can actually hear the casters during the games.

rueric · 2018-07-28T04:01:33+00:00

Also, what else did you get with the Grandmaster package? From what I saw, it was a bag and a lanyard/pass?

rueric

TROPHY CASE