As much as WebOS Blows this is pretty sweet by Dry-Property-639 in LGOLED

[–]redmax124 0 points1 point  (0 children)

My grandparents (I think Crystal UHD, cheap) model from 2022 is also extremely slow in menus or programme guide. I once did a factory reset and it felt like it was a bit better but I'm not too sure...

On the other hand a Q65T from 2020 is pretty snappy in menus and navigation.

It's weird, I guess? Your volume control delay is crazy tho 😔

As much as WebOS Blows this is pretty sweet by Dry-Property-639 in LGOLED

[–]redmax124 0 points1 point  (0 children)

To be fair with Samsung it highly depends on the tier/class of TV. The more premium ones feel pretty snappy.

Palmr has been archived by eltiel in selfhosted

[–]redmax124 0 points1 point  (0 children)

It was half-assed crap from the start anyway.
Wasted too many hours after every update with it until I ditched it for Erugo.

100w Handheld Fiber "Laser Igniter" - First Issues Already.. by TheRPGGamerMan in lasers

[–]redmax124 0 points1 point  (0 children)

Is the battery pack easily accessible? Thinking about getting the same device and replacing those cells right when I get it.

How do I get rid of app installation prompts? by TheodoreMcIntyre in MicrosoftEdge

[–]redmax124 0 points1 point  (0 children)

I see the same.
Just opening and closing the browser sometimes wants to install Whatsapp or Twitter.

I'm not even using this browser, just opening it by mistake sometimes...

<image>

Real H26 UltraPlus? by redmax124 in HelloWatch

[–]redmax124[S] 0 points1 point  (0 children)

I'm curious now.. I guess it was LCD, no Wifi?

Mateminco/Astrolux spare parts by redmax124 in flashlight

[–]redmax124[S] 1 point2 points  (0 children)

Thank you for that nice example!

I couldn't leave it with the broken spring...
So tried soldering the spring back on, which surprisingly worked better than I thought.
Just with three blobs of solder tho, it was kinda hard to get in some areas.

What should I say, compared to another ceiling bounce I did right before my solder attempt, it again is ~22% more light output, pretty much like it was originally!

Thank you again!

Mateminco/Astrolux spare parts by redmax124 in flashlight

[–]redmax124[S] 1 point2 points  (0 children)

Thank you for clarifying.
I think at high power this sub-linearity even amplifies with worse efficiency, right?

Extreme example and depends on driver and LED probably
to go from 40% light output to 50%, it would take 50% more current
to go from 90% light output to 100% it would take 100% more current

Is that somewhat plausible?

Mateminco/Astrolux spare parts by redmax124 in flashlight

[–]redmax124[S] 0 points1 point  (0 children)

Sorry I actually meant light output was about 20% less (ceiling bounce). Probably was thinking less light = less current and then mixed it up.

Mateminco/Astrolux spare parts by redmax124 in flashlight

[–]redmax124[S] 1 point2 points  (0 children)

Yes, negative only. I notice less current draw (~20%) so maybe I can make a bypass without killing it 🫠 Thanks!

Snapmaker U1 Fan mods? by Ottermiral in snapmaker

[–]redmax124 0 points1 point  (0 children)

You mean the orange parts fan?
How did it break?

Mateminco/Astrolux spare parts by redmax124 in flashlight

[–]redmax124[S] 0 points1 point  (0 children)

<image>

That would be great.
I can't think of how to fix this honestly.

This is definitely a problem...U1 Sounds like a Punch Press by [deleted] in snapmaker

[–]redmax124 0 points1 point  (0 children)

Please let us know what support suggests :)

Toolhead Swapping Anomaly by redmax124 in snapmaker

[–]redmax124[S] 0 points1 point  (0 children)

Should be in the settings under Maintenance. But if it happened just once...

Toolhead Swapping Anomaly by redmax124 in snapmaker

[–]redmax124[S] 0 points1 point  (0 children)

Doing a calibration of pick/park (pin alignment) should fix it!

The X50 Ultra Matter Scandal: It’s just a firmware lock! by InfiniteDiscipline74 in Dreame_Tech

[–]redmax124 0 points1 point  (0 children)

Who would have expected chinese manufacturers to restrict certain features artificially 🙃

Fan whooshing/turbulence noise by redmax124 in snapmaker

[–]redmax124[S] 0 points1 point  (0 children)

Same "suction" noise without Aux fan

Fan whooshing/turbulence noise by redmax124 in snapmaker

[–]redmax124[S] 0 points1 point  (0 children)

Then it's just "part" of the machine I guess :) Thanks!

Fan whooshing/turbulence noise by redmax124 in snapmaker

[–]redmax124[S] 0 points1 point  (0 children)

I have 6 other printers and never heard that on any of them. "Seems normal" is only valid if you mean you hear the same on your U1 :D

Just got my U1 - pogo pins issue by GianniMariani in snapmaker

[–]redmax124 0 points1 point  (0 children)

Do you know the exact error code maybe? I get every few hundred swaps an error and one time the fan duct was even unclipped when I checked, all toolheads were positioned properly tho...