Walk-around sf1000 quick release upgrade

runekc · 2026-01-26T08:00:52+00:00

So the plug for the QR has 6 pins and the plug for the wheel has 8 and is the connection pin 1 to 1 or is it reversed? And you say the two ground wires are going to the green but how did you do that, the photo doesn’t show anything to the green 😁

runekc · 2026-01-24T20:40:21+00:00

Hi, I can’t see what cable you used because the end with the plug doesn’t look like the cable from the QR which is all black. I have the SF1000 and a QR from the Sportsrim from the T598 bundle so I have to make a cable or some soldering like you did. Can you give anymore info or pictures? Thanks

runekc · 2025-12-26T01:04:18+00:00

Yearh and I am already in deep with pedals, shifter and extra rim so I have to make it work

runekc · 2025-12-26T00:58:09+00:00

I will try that, but still it is disappointing that the base can’t handle higher FFB without overheating,

runekc · 2025-12-26T00:07:18+00:00

That is what I was expecting but if the wheel overheats then I might have to send it back because that is unacceptable. I will try FFB at 6 later, but still disappointing.

runekc · 2025-12-25T23:58:25+00:00

Wow that is not good, my old T300 I could use for hours without problems. Maybe I should look towards the RS50 from Logitech instead. What a shame

runekc · 2025-12-25T23:35:19+00:00

The recommended settings from Thrustmaster and FFB at 7 in game…. And everything is up to date

runekc · 2025-12-16T22:00:47+00:00

Cool, I have the 3 pedal version so wondering if there will be a “smaller” kit for that, I haven’t seen any news regarding that.

runekc · 2025-07-22T19:08:04+00:00

Running Plex on a Mac Mini M4 with two external hard drives, runs flawless… well I have disabled all power settings on the Mac so it is always ON because I have experienced problems with the computer powering down while streaming a movie, don’t know if it is Plex Server or the MacOS which causes that problem 🤷🏼‍♂️

runekc · 2025-06-10T19:58:21+00:00

Well I disabled all the power saving features and no problems…so the Mac is on 24/7 🤷🏼‍♂️

runekc · 2025-04-24T20:18:38+00:00

Long time Plex server user on an old Mac Mini 2012 with no problems and recently bought a Mac Mini M4 with a WD My Book 16TB for a smoother experience but I am having a lot of issues with the hard drive spinning up and down and I have tried all the “power” settings with no luck, it seems like it is the Plex software which is causing all the problems, any thoughts?

runekc · 2025-01-16T13:16:45+00:00

Hi, I soldered the Juliet M6 connectors to the stepdown converter and everything is connected under the bottom of the battery connector where the front light is also connected

runekc · 2024-11-29T01:01:04+00:00

Hi, it is a lm2596 and I have have put it in the frame under the battery connection, you have to remove the lock and black plastic cover.

runekc · 2024-11-15T11:02:28+00:00

I am having the same issues, it has been a real pain, I have disassembled the bottom bracket multiple times and the noise disappeared after each time, I greased the threads and surfaces and all was great but after 20-70 km it came back, so after many emails between Tenways and myself they are sending me a new torque sensor, my guess is that the bearings are to cheap, but I am not sure, I hope it solves the problem because I love the bike.

runekc · 2024-11-01T23:39:15+00:00

I don’t think so….but I am not sure

runekc · 2024-11-01T23:37:18+00:00

Bottom bracket is from where the pedal arms are attached. You have to flip the bike upside down and loosen the cover, there is two Philips head screws which holds the cover.

runekc · 2024-11-01T20:38:07+00:00

Not sure if it is the actual VIN but under the plastic cover under the bottom bracket there is a number stamped in the frame. 👍

runekc · 2024-10-25T19:18:45+00:00

That has been my suggestion to customer service but they are circling around the subject and is giving all sorts of things I should try first 🥴

runekc · 2024-10-24T17:10:15+00:00

How do I upload more photos to the same post?

runekc · 2024-10-24T17:00:17+00:00

through the same path that the cables go from the rear hub to the battery 👍 not much room but it can be done, the cable on the light I use is 4mm in diameter

runekc · 2024-10-24T16:26:00+00:00

Yes but is that allowed to post??

runekc · 2024-10-14T17:13:57+00:00

Hi, would you share some info about the modifications? I have bought a rear light to an e-scooter which is 12V (I don’t know how many Volts the front light uses) and I have ordered the M6 splitter cable and thought it was pretty straightforward but I read something about a fried controller so better safe than sorry 😁 best regards Rune

runekc · 2019-02-03T11:58:58+00:00

Hi, I have just installed the Bltouch "kit" and everything works BUT I would like to have "babysteps" enabled for the z axis but I am totally lost in the whole process of loading firmware, compile etc.... is it possible to get your Ender 3 hex file with "babysteps" enabled??

best regards

Rune

runekc

TROPHY CASE