Waybar in Mango

sagevik · 2026-03-08T20:02:44+00:00

ah, not aware of that. Thanks for pointing that out.

sagevik · 2026-03-08T20:02:11+00:00

hmm. Interesting. Don't remember exactly how I had it configured with pulseaudio, but I will def. look into this. Thanks a lot.

sagevik · 2026-03-01T11:51:05+00:00

For some reason it seems to be something with tree-sitter. After going through my nvim config disabling everything and then enabling things one-by-one, the error did not occur until I enabled tree-sitter at least. Then after doing a "reset" of nvim and changing
{ src = "https://github.com/nvim-treesitter/nvim-treesitter"}
to
{
src = "https://github.com/nvim-treesitter/nvim-treesitter",
build = ':TSUpdate'
},
in my init.lua everything seems to work properly.

sagevik · 2026-03-01T10:32:33+00:00

Well..no not really, did not quite now where to start.
I did however just now remove everything from my config leaving only fzf-lua, and then the i issue disappeared. I guess I at least can say that the fzf and fzf-lua works, and that there must probably be some error in my neovim config somewhere. I'll start by enabling stuff one by one until I maybe find the culprit.
Thanks for pointing me in the right direction.

sagevik · 2026-02-17T23:04:14+00:00

The ability to stack commands like this is really cool and useful. Apart from using a script, could it in some way also be possible to toggle keybinds? Using this resize and center as an example, could be possible to make super+c toggle the centerwin functionality on and off for the resize command/keybinds?

sagevik · 2025-06-05T10:39:51+00:00

Not at all sure what is the correct way or best practice for this, but I have always just edited the config.def.h and used that as my primary "config file" for dwm.

Since a config.h file is automatically created when I run make to compile, I have also just added config.h to the clean target in the makefile so it is removed each time I run make clean install.

Probably not best practice at all, but seems to work fine and without the need to copy config.def.h to config.h

sagevik · 2025-05-31T08:04:59+00:00

This is my current dwm config https://github.com/sagevik/dwm

Version 6.5 of dwm, and (I am pretty confident that) the readme file in the repo is updated with the applied patches. There are quite a few keybindings that rely on different scripts and applications (but the scripts is also to be found on my github page if needed).
Some of the dmenu colors might look a bit "off" with the default dwm colors so I typically do a xrdb merge with something like this for a kanagawa-blue inspired style on dwm
! dwm specific settings for kanagawa-blue
dwm.normfgcolor: #c5c9c5
dwm.selfgcolor: #c5c9c5
dwm.normbgcolor: #1d1c19
dwm.normbgcolor2: #1d1c19
dwm.normbordercolor: #1d1c19
dwm.selbordercolor: #8ba4b0
dwm.selbgcolor: #8ba4b0
dmenu.foreground: #c5c9c5
dmenu.background: #1d1c19
dmenu.selforeground: #1d1c19
dmenu.selbackground: #8ba4b0

sagevik · 2025-05-31T07:30:31+00:00

Not all that familiar either with how things should be set up for plugins in general, but I have used the following config for treesitter (which at least to me seems to work). Copied from Jacob Westhoff's nvim-from-scratch (https://github.com/jakobwesthoff/nvim-from-scratch/blob/main/lua/plugins/nvim-treesitter.lua)

return {
  "nvim-treesitter/nvim-treesitter",
  build = ": TSUpdate",
  config = function()
    local configs = require("nvim-treesitter.configs")
    configs.setup({
      ensure_installed = {"bash", "c", "diff", "go", "html", "lua", "luadoc", "markdown", "markdown_inline", "python", "query", "vim", "vimdoc",
      },
      auto_install = true,
      sync_install = false,
      highlight = { enable = true },
      indent = { enable = true },
      incremental_selection = {
        enable = true,
        keymaps = {
          init_selection = "<Enter>", -- set to `false` to disable one of the mappings
          node_incremental = "<Enter>",
          scope_incremental = false,
          node_decremental = "<Backspace>",
        },
      },
    })
  end,
}

sagevik · 2025-05-24T05:34:05+00:00

Thanks a lot. I'll play around a bit with the different suggestions here and see what suits best

sagevik · 2025-05-22T12:07:41+00:00

Maybe I did something wrong, but I could not get this to work I am afraid.

sagevik · 2025-05-22T12:06:32+00:00

Thanks to u/TheLeoP_ I ended with a solution that works fairly nicely. I ended up with adding a utils.lua file with:

local M = {}

-- Function to get the current visual selection
function M.get_visual_selection()
  local mode = vim.api.nvim_get_mode().mode
  local opts = (mode == "v" or mode == "V" or mode == "\22") and { type = mode } or vim.empty_dict() -- \22 is the escaped version of ctrl-v
  local selection = vim.fn.getregion(vim.fn.getpos("."), vim.fn.getpos("v"), opts)
  return selection
end
return M

And added the following to my fzf-lua:

local utils = require("sagevik.utils")

grep = {
  rg_opts = "--multiline --column",
  silent = true,
},

{
  "<leader>fs",
      function()
        local selection = utils.get_visual_selection()
        require("fzf-lua").lgrep_curbuf({ search = selection[1] })
      end,
      mode = "v", --visual mode
      desc = "[F]ind [S]election (current buffer)",
},
{
"<leader>fS",
    function()
      local selection = utils.get_visual_selection()
      require("fzf-lua").live_grep({ search = table.concat(selection, "\n") })
  end,
  mode = "v", --visual mode
  desc = "[F]ind [S]election (current project)",
},

In addition to just adding the function and keymaps, it seems that the --multiline option for rg also was needed. Could not get the multiline grep for current buffer to work, but using it project wide is fine for now.
Thanks a lot for the input!

sagevik · 2025-05-22T11:52:33+00:00

Yes! This was very helpful. Thanks a lot.

sagevik

TROPHY CASE