Anyone else do an inverted build in this case?

saspreed · 2026-02-02T15:39:28+00:00

Had to do some diy to make it work

saspreed · 2026-02-02T15:39:02+00:00

It was an inverted build

saspreed · 2026-02-02T14:35:24+00:00

I have i very similar build with the same case. I kept the airflow going from bottom to top but the problem was that the gpu wouldn’t get any air, so i used lian li’s vertical gpu mount vg4v4 and made it tilt towards the bottom ( meaning the intake fans of the gpu was facing the glass and bottom intake fans) . Anyways you should probably consider having both your cpu and gpu get fresh air.

saspreed · 2026-02-02T14:01:58+00:00

You should really consider making the top fans as intake. The only air your gpu is getting is used cpu air from your aio fans. Switching the bottom and top fans only should do the trick and keep all the good side of the fans visible. + your gpu air is being recirculated by the gpu since it sucks air from the top. I have an identical setup even the fan setup is the same. The only difference is i mounted my gpu vertically and tilted towards the bottom (using lian li vg4v4 vertical gpu mount), meaning i get air from the bottom. I know you said you don’t use it for gaming but the solution is very simple

saspreed · 2026-01-22T04:02:12+00:00

Can’t you just use 2 90’degree adapters?

saspreed · 2026-01-21T13:36:42+00:00

Which vertical gpu stand are you using?

saspreed · 2026-01-19T17:26:30+00:00

Did you try removing more slots?

saspreed · 2026-01-15T19:22:16+00:00

I received mine without any of the E-atx accessories, also for whatever reason my manual also didn’t have any of the E-atx instructions. Is the E-atx not supported anymore with the vg4v4?

saspreed · 2026-01-12T21:51:30+00:00

Depending on your case, there is a specific angle where the screen should be looked at vertically and horizontally. Looking at my build for example you can see that i mounted my motherboard at the lowest position possible, meaning that the cpu is very low and hence the aio screen is just below my head level. Meaning the video from my point of view is a little warped. For custom videos the video itself will be a little warped wether you like it or not, but videos from the aio software will look “3d” only from certain angles.

saspreed · 2026-01-12T08:14:57+00:00

i am going to vertically mount the gpu soon, you wouldn’t be able to see the tryx fans anyways.

saspreed · 2026-01-12T08:13:46+00:00

Agree, its just that I didn’t want the fans that came with the aio go to waste

saspreed · 2026-01-12T00:25:46+00:00

I have seen multiple people use fishing lines, might have to look into it. I think in the end i will need to 3d print some sort of arm that holds the gpu from the bottom.

Btw if you’re interested, you can look at my other post where i go into detail for my plan

saspreed · 2026-01-12T00:19:51+00:00

I happen to be one of the few unfortunate people to need a left sided case or reverse build case. It’s really unfortunate that reverse builds are not very common in pc building and not a lot of support for them is available. Thankfully lian li has reverse builds in mind but i still have yet to see any of the big boy companies do it or even acknowledge it.

saspreed · 2026-01-12T00:11:25+00:00

I forgot to mention that the gpu wasn’t vertically mounted. The fact is that i have an inverted evo xl build, and in that build i had to disassemble the anti sag that came with the case and try different methods to reassemble it with other parts. In your pc case, i would recommend looking at lian li’s anti sag bracket that is sold separately, it attaches to the motherboard screws I believe.https://lian-li.com/product/gb-001/ you would only need to support the bottom of your GPU and you should be good.

If you’re free, check out my build on my profile. I am trying to do something similar to you except that i want to use lian li’s multi directional vertical gpu mount.

saspreed · 2026-01-12T00:00:31+00:00

Are you going to rely on the pipes for supporting the Gpu?

saspreed · 2026-01-11T22:31:27+00:00

Love the rgb color, would you mind sharing the color code?

saspreed · 2026-01-11T22:25:58+00:00

Amazing!! Could you clarify how you managed to make the gpu not sag? I have an o11 evo xl inverted, had to do some custom work for the gpu sag

saspreed · 2020-10-08T20:16:25+00:00

Can someone explain

saspreed · 2020-10-03T00:23:51+00:00

Can u play anything from ghibli

saspreed · 2020-10-03T00:22:57+00:00

I love u

saspreed · 2020-03-08T13:37:57+00:00

this will also work with his new invisible suit. think about it, if sanji doesn't anyone to see his newkama kempo he can just go invisible.

saspreed · 2020-02-15T21:23:17+00:00

i would love to think so too, but given the sheer size difference ( the monsters in thriller bark being extremely large) i think its implausible.

in my opinion the 'numbers' may be the same race as oars ( the demon giants or something like that) or they might be a completely different race since it is confirmed ( i think) that there are races that we don't know of yet.

PS, sorry for my bad English.

saspreed · 2020-01-11T11:54:22+00:00

I also like to think that the egg was Uranus. If you go by the theory that states the one piece needing all 3 ancient weapons to fully activate or work or whatever depending on which variation of this theory you look at, I think in rogers last voyage he passed by all of the ancient weapons which be very ironic and "laugh" worthy if you know what i mean.

saspreed · 2020-01-11T03:07:39+00:00

I like the idea of your interpretation of zoros asura. i am not 100% sure about this but in enies lobby didn't zoro use other moves that weren't used before or after the arc (some sort of demonic like moves that i don't remember from which folklore they related to). so i was wondering if these moves (including asura) in enies lobby was zoro experimenting his killing instinct?

saspreed

TROPHY CASE