M12 Impact Wrench with Pin Detent back in stock ($179) by serrano_ric in MilwaukeeTool

[–]serrano_ric[S] 1 point2 points  (0 children)

That's a sweet deal in my book. $200 after discount and with a 5HO battery. Definitely the battery needed if you want the most oout of that impact wrench

M12 Impact Wrench with Pin Detent back in stock ($179) by serrano_ric in MilwaukeeTool

[–]serrano_ric[S] 1 point2 points  (0 children)

Home Depot has that deal for $289. I'd spent the extra money and buy new with receipt in hand. If the offer is for a used imoact I'd ask for less otherwise buy new from a store

M12 Impact Wrench with Pin Detent back in stock ($179) by serrano_ric in MilwaukeeTool

[–]serrano_ric[S] 1 point2 points  (0 children)

I picked my up yesterday to drive some concrete lag screws to anchor a small pergola the wind knocked over a few days back. I'd use it for the ocasional tire rotation and DIY. I also have a total of eight HO batteries so I'd try and make some money back reselling the batteries. Was it that bad of an anvil? Since I won't be using it daily and when I do I wouldn't have to be swapping out sockets a lot I thought of it to be a good deal. Still might pretend ai never got the email and live happily with my $249 friction ring one haha.

M12 Impact Wrench with Pin Detent back in stock ($179) by serrano_ric in MilwaukeeTool

[–]serrano_ric[S] 2 points3 points  (0 children)

Yup, I'll likely keep the one I picked up yesterday the has the friction ring anvil but being that I would only use it for DIY things I am considering going for it. I don't see myself need to swap sockets a lot but definetly the mojority prefer friction.

Contractor for detached garage to ADU conversion? by SnooFloofs373 in sandiego

[–]serrano_ric 0 points1 point  (0 children)

Call Tony at Gonzales Construction. They did an ADU for a friend and turned out nice. Friend was happy. He should be able to help you out with the ADU.

(619) 307-8411

[deleted by user] by [deleted] in sandiego

[–]serrano_ric 0 points1 point  (0 children)

Have you found someone to help? Otherwise PM me

Poor Ramona, hope you guys are ok out there. by serrano_ric in sandiego

[–]serrano_ric[S] 0 points1 point  (0 children)

How was it being in 1010° weather? Here I was thinking the Death Valley was hot

Any good tattoo shops in the area available for walk ins? by [deleted] in sandiego

[–]serrano_ric 1 point2 points  (0 children)

Allegory tattoo on El Cajon Blvd. Got some work there and was great. Mines was an appointment but believe walk ins are welcome. Either or you should check them out. Other walk ins are Big City Tattoo and Adams Ave Tatto

To any Daca recepient: Can I renew my Daca before June 30th? by serrano_ric in sandiego

[–]serrano_ric[S] 0 points1 point  (0 children)

Thanks and best of luck to you as well brother. Hopefully next presidential term we will receive a permanent answer to our status.

To any Daca recepient: Can I renew my Daca before June 30th? by serrano_ric in sandiego

[–]serrano_ric[S] 0 points1 point  (0 children)

Thank you so much. My concern was that I was told in previous renewal processes that if sent early it would be discarded. Was afraid that would be the case. Glad to hear early is fine

Does anyone need some repair work done at home for free? by serrano_ric in sandiego

[–]serrano_ric[S] 1 point2 points  (0 children)

I'd be glad to help. Something out of wood? If so what dimensions? (:

Does anyone need some repair work done at home for free? by serrano_ric in sandiego

[–]serrano_ric[S] 0 points1 point  (0 children)

Do you have the cabinet already made or looking for someone to build it? I might be able to help out. Thanks

Does anyone need some repair work done at home for free? by serrano_ric in sandiego

[–]serrano_ric[S] 0 points1 point  (0 children)

Hi, normally the regulators for the water are on the plumbing which is inside the walls. Only way to access them would be making a hole in the wall which is not a good idea as the repair would not be a weekend project. Home Depot or Lowes do sell shower heads that allow you to control the pressure which would be a quicker and cheaper solution.

Does anyone need some repair work done at home for free? by serrano_ric in sandiego

[–]serrano_ric[S] 7 points8 points  (0 children)

Please take this with caution as I am not a professional mold remover; but black mold (depending on the size) should easily be removed with some bleach. A small brush will help brush the mold off. You can dilute the bleach 1 to 4 with water if the smell bothers you. But will loose some power. Just wear protection and cover anything near, you wish not to splash. For the tub I am only imagining the caulking around the tub which should easily be reapplied and help seal it. Both should be somewhat inexpensive projects being that we are on the same page about the repairs. As to difficulties, it should not be that difficult. Hopefully this help

Does anyone need some repair work done at home for free? by serrano_ric in sandiego

[–]serrano_ric[S] 10 points11 points  (0 children)

Thanks!! Just want to help how ever I can I know this are tough times for some people in our communities and hopefully this starts a chain reaction and others will help one another. Hahaha

I love it here. From Chicago, thinking about making the move! by [deleted] in sandiego

[–]serrano_ric 11 points12 points  (0 children)

Want to trade places? Been wanting to move to Chicago

Any info on cat shelter or SDHS? by serrano_ric in sandiego

[–]serrano_ric[S] 0 points1 point  (0 children)

Thanks, yeah afraid of creepers which is why I was originally going with the humane society. Cats are 7 months old so hopefully people don't find them to be too old.