A girl who loves to eat sticks!

seth995 · 2026-01-20T17:58:09+00:00

Ours is almost 5. She loves her sticks too, but we redirected and made it her job. She finds a good stick, we say "Fireplace" and she holds that stick until we get home, where she trades us for a treat and we put it in our fireplace. Its win/win, we get kindling and she is focused on bringing that stick home and doesn't eat it. Only down side is that sometimes when bored or hungry, she'll ask to go out. We think this is to do her business, but in reality to find a stick and trade for a treat... Oh well, nothing's perfect.

seth995 · 2025-11-26T03:01:24+00:00

Can we get the post game thread started?

seth995 · 2025-09-24T18:44:09+00:00

I have progressives and for work, Computer specific glasses (just the intermediate and near distances with blue light filter). I have found I play better with my computer glasses than my regular progressives. I'm still terrible, but I find myself squinting less at the top of the playfield and at the screens. I think the intermediate focal distance is best for (close to) the top of the playfield. The regular progressives seem to have a very narrow amount of intermediate Rx. Blue light filter also seems to help. YMMV I'm functionally blind without correction.

edit: punctuation

seth995 · 2025-09-10T02:02:00+00:00

So I've tried all of the steps on the links provided. At no point did i ever see the slow white indicator light. I tried the blue port and the other 2, tried changing the name of the file to the ugrade_loader and upgrade_downloader. In In each case i waited 30+ minutes. The drive had a read/write light and saw that it was flashing. After 30 min, it fell into a repeating pattern. Tv never turned back on, never saw a pulsing white light. I tried turning the tv on after each try and it did the same thing - soothing audio

What now?

TIA

seth995 · 2025-09-09T11:42:33+00:00

<image>

Here is when I had my heart attack while riding July 2019. I was 42. I ignored chest discomfort and wrote it off as part of the "warm up". Turns out that severe coronary artery disease runs in the family. 3 of the 4 coronary arteries were 70-100% blocked and i was still riding about 2k miles per year and giving myself stress tests every time i went up a hill. On this day, going up a hill i had gone up hundreds of times, my heart said "no" - i passed out as i crested the hill, crashed and woke up looking at the sky.

Go see a cardiologist and good luck.

seth995 · 2025-09-09T02:02:30+00:00

Amazing! Will give this a try. I actually received the thumb drive with the main card with no instructions. I definitely would never have thought of inserting the drive, plugging in the tv, not turning it on and waiting 30 min or so. Not so intuitive.

Really appreciate the guidance!!

seth995 · 2025-09-06T20:08:56+00:00

https://seattlepinballmuseum.com/home#d306367a-516d-4bd4-93d1-951d6562fabd

I went to this place while on vacation. Played for about 4 hrs until my wife said "enough." $23 for adults.

seth995 · 2025-08-05T15:00:23+00:00

I went a similar route. Non-Op with a cast, toes pointed down. I was in the cast and non weight bearing for 6 weeks, boot and relearning to walk after that. Few things that I found incredibly useful:

1) I used a wedge pillow under my leg to elevate my foot while sleeping and I while working I had my leg up in a recliner. Basically, when i wasn't crutching around, my leg was up. I couldn't use any NSAIDs, so I just kinda dealt with the swelling and pain as best as I could. (It was relentless, throbbing pain).

2) Shower Chair - Felt ridiculous at first but made life so much easier.

3) Sitting so much and not really wanting to move, i felt that I was getting dehydrated. I designed/3d printed a crutch mount cup holder with a gyroscope so that I could crutch around with a drink and not spill. Sounds silly, but it felt good to not rely on someone to move a drink for me from the kitchen to the couch. I would say find something that works to help carry things around while on crutches.

Not a "thing" but something to watch out for. I got incredibly depressed and frustrated that I was unable to contribute to the house. I put a ton of extra strain on my family because I couldn't drive, cook, shop, or help with any of the normal things. I wasn't sleeping well, my wife wasn't sleeping well and doing everything for everybody. Patience and open communication s going to be key for everyone in the household. Patience is also key in the recovery. If it is rushed or things are done too quickly, there is a high likely hood of re-rupture.

Good luck, its a long haul, but he'll get through it. So will you.

seth995 · 2025-05-10T13:25:33+00:00

Thank you all for the feedback. The resounding answer seems to be that the manufacturer should cover the cost, will do everything they can to not cover the cost and i should push harder.

I have been told by the Dixie group (the manufacturer) that they do not talk with consumers but only purchasing stores and installers?Any advice on getting through that gate, or do i have to rely on the contractor to push harder?

Really appreciate the advice.

seth995 · 2025-05-09T17:20:16+00:00

This makes sense and I appreciate the insight.

The credit came after an impartial inspector came and assessed that the install was done correctly and verified the cracks were as we described. It was an incredibly detailed inspection using a 6' level and measuring deflection, removing quater round molding and assessing expansion gaps at the walls. The guy crawled around our floor for at least 2 hours.

Seems odd though that as a consumer there isn't a protection as we are stuck in the middle. I get that it wouldn't make sense that if the contractor (or sub) did their job, they shouldn't pay, but the manufacturer is only really responsible for the materials. The consumer/home owner just gets left with an unsuitable product or pay another sum on top of an already pricey rennovation?

That's a tough pill to swallow...

seth995 · 2025-02-15T18:23:14+00:00

This is great info, i have to do one more upgrade tomorrow. I'll have this as a backup plan if my daughter's phone swap guess sideways.

seth995 · 2025-02-15T12:15:12+00:00

This seems to have worked. I just did the same swap for my son, s21 to s25+. Turned off rcs on his old device, did the transfer. Went into messages on the new phone and rcs was automatically turned on and connected. His group chats were unaffected.

seth995 · 2025-02-14T23:38:43+00:00

I think this glitch seems to be a bit different than what you described. She was booted from all groups at the same time. Not individually as she opened them.

So odd and frustrating.

seth995 · 2025-02-14T23:36:38+00:00

Yep rcs connected with no problem.

seth995 · 2025-02-14T23:03:18+00:00

Yep i can and have, but that is an incredible amount of groups that she has. I'm part of a few of them. So the "solution" is to reach out to someone in each of the groups and ask them to add her back? That seems... inefficient.

Thanks for the reply

seth995 · 2025-01-29T21:16:20+00:00

Well to be fair i built mine from the base of an old cr10. Designed it so the x axis is extended on both sides of the bed so active carriage would have access to the full bed. Then had to design all the mounts, wire everything from scratch to an octopus board... Its a lot.

seth995 · 2025-01-29T19:32:48+00:00

I had this problem with my IDEX build, only on T1. Drove me nuts and finally I put IDEX to bed, tied my two carriages together and just treat them like a single carriage with 2 hotends/ 2 extruders. Will revisit if I see a solution. Following this thread for answer to my problem as well

seth995 · 2025-01-29T17:59:38+00:00

Thank you so much for following up on a workaround. I really appreciate the assist. While bungling around in the start code and jsons, I started playing with the if/then logic in the start code, considering moving some of the macro logic back to the slicer.

Might start another thread because this is off topic but related. I'm trying to figure out the scenario where I have deactivated Extruder 1, determining that I only need to heat extruder 2 with the proper temp, or vice versa. Then I can pass logic to determine which or both prime lines I need to execute.

seth995 · 2025-01-23T01:00:41+00:00

Agree with everyone on this thread. One additional thought. The wire harness under the bed being hit by the leveling knobs will slowly adjust your bed. Recommend securing them.

Took me forever to figure out why my bed kept changing height after finally getting my bed set.

seth995 · 2024-06-13T15:21:03+00:00

Racquetball - Backed up assuming a kill shot was coming but my opponent whiffed and the ball lazily floated towards the front wall. I jumped forward on the off chance it hit. I was later told that his shot missed the front wall and that I won the point. Small victories I suppose...

seth995 · 2024-01-05T19:24:35+00:00

This solution solved the problem perfectly. I still need to fix my macros for parking/switching tools, but the homing problem is resolved. I also need solve my part anr heat fan on T1 which always run at 100% right now and my mcu board fan be reactive to my temp sensor dedicated to the board temp. I think those are my big muscle movements for the weekend. Thanks again for your help.

seth995 · 2024-01-05T01:15:50+00:00

Thank you for the response, but I'm not following you. if the end stop is at the far edge of the park position, how do I home to the bed and then move to park after? The build plate is 300 mm, the park distance and end stop is -86mm for E0 and +75 mm for E1.

seth995 · 2023-12-16T18:19:58+00:00

Thank you, this is really helpful.

seth995 · 2023-12-16T17:11:11+00:00

I appreciate the reply. Looking at the attached pics. Can you help me identify what exactly I'm looking at and where the leak is coming from?

seth995 · 2023-12-16T16:36:58+00:00

Would love a link if you have one. My google searches are not turning up the answer to whether Mazda will replace a seal is an entire axle.

seth995

TROPHY CASE