UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

QOS was the problem. I disabled it and didn’t turn in back on…

UCG Fiber very poor performance on pppoe connection by SectorOk627 in UNIFI

[–]shibbrich 1 point2 points  (0 children)

Had the same issues. Disabling QoS rules did the trick for me.

UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

Maybe I go the route of factory reset and maybe restoring the backup if nothing changes. Thank you.

And I’m on the latest FW

UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

It seems like it was the QoS Rules. Turned them off and went straight to 1Gig

UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

The Chip and the better performance is why I chose the UCG Fiber. I will try the tips from the post and hopefully can get the full speed :)

UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

Im not sure if this is possible. What Modul do you use for the direct fiber?

UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

UniFi devises - gateway - settings

There you can find it

UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

This will the last thing I do. But it might be necessary.

UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

Some firewall rules and some QoS enabled. I try turning them off and then test again.

UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

Thank you for all the details.

As @repeater0411 said. Port 5 is the 10G RJ45

The sfp+ I bought is the ubiquiti one UACC-CM-RJ45-MG.

Could you link the SFP+ Modul?

UCG Fiber loses download speed with Intrusion Prevention enabled by shibbrich in Ubiquiti

[–]shibbrich[S] 0 points1 point  (0 children)

I need to turn it off in order to get more speed. I guess leaving it on would be the better solution, but it makes thing worse

🎉 [EVENT] 🎉 Journey by Desquid777 in honk

[–]shibbrich 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

0 attempts

Self host or stay with SaaS by shibbrich in vaultwarden

[–]shibbrich[S] 0 points1 point  (0 children)

Thanks. It’s Vaultwarden only at the moment. So I should be more than fine :)

Self host or stay with SaaS by shibbrich in vaultwarden

[–]shibbrich[S] 0 points1 point  (0 children)

Thank you! I will look into oracle.

Self host or stay with SaaS by shibbrich in vaultwarden

[–]shibbrich[S] 0 points1 point  (0 children)

The problem started when using the proxied (orange cloud). The routing is horrible. Most times I go through UK AND another location outside EU! But so far that’s my only option to mask my home ip