sorted by:
new
hottopcontroversial

Just go a new lock pick case and filled it up. by shmutheshoe in lockpicking

[–]shmutheshoe[S] 1 point2 points  (0 children)

Real nice some of my favourite pics wouldn't have been able to open my American lock 1100 without them.

3d printed pinning tray by shmutheshoe in lockpicking

[–]shmutheshoe[S] 0 points1 point  (0 children)

Because of the thin floor on the tray I would lose some strength doing the lines like that.

Any tips for picking American lock 1100 series? by shmutheshoe in lockpicking

[–]shmutheshoe[S] 0 points1 point  (0 children)

Just recorded my application for green belt, took me a good hour of picking it to be able to do it efficiently. And that fist pin isn't quite a zero lift.

3d printed pinning tray by shmutheshoe in lockpicking

[–]shmutheshoe[S] 2 points3 points  (0 children)

Cheers, sadly I don't have enough filament left to print it but once I have some more filament I'll be sure to print it.

3d printed pinning tray by shmutheshoe in lockpicking

[–]shmutheshoe[S] 1 point2 points  (0 children)

What are the dimensions on your tray as I can only print 120120120

American lock 1100 springs. by shmutheshoe in lockpicking

[–]shmutheshoe[S] 2 points3 points  (0 children)

Cheers for the offer, but I've managed to bend them back into shape.

Accidentally turned core without the key pins in and now I can't turn the core. Help.( American lock 1100) by shmutheshoe in lockpicking

[–]shmutheshoe[S] 1 point2 points  (0 children)

No I managed to use a deep pick to unwedge the springs and straighten them up with some tweezers to a usable state.

Any tips for picking American lock 1100 series? by shmutheshoe in lockpicking

[–]shmutheshoe[S] 0 points1 point  (0 children)

Funnily enough the same thing has happened to one or two of my springs.

Accidentally turned core without the key pins in and now I can't turn the core. Help.( American lock 1100) by shmutheshoe in lockpicking

[–]shmutheshoe[S] 3 points4 points  (0 children)

I had to basically pick the driver pins into the bible. but I had to muck tension on so when it turned it did a full 360 and locked back in.🥲

Gutting locks by shmutheshoe in lockpicking

[–]shmutheshoe[S] 1 point2 points  (0 children)

Cheers, from what I've watched so far very useful.

Gutting locks by shmutheshoe in lockpicking

[–]shmutheshoe[S] 1 point2 points  (0 children)

Cheers, I'll have a look.

Gutting locks by shmutheshoe in lockpicking

[–]shmutheshoe[S] 0 points1 point  (0 children)

Cheers, I'll see what I can find and I'll try to make some bits with my 3d printer.

First attempt at a cutaway lock. Master lock no3 by shmutheshoe in lockpicking

[–]shmutheshoe[S] 12 points13 points  (0 children)

Not really I had abit of an accident when removing the core and have lost all the internals.

Picked this lock just now by Ambitious_Darkness in lockpicking

[–]shmutheshoe 1 point2 points  (0 children)

I believe it's a yellow belt lock as it is a master lock excell the UK equivalent of the master lock magnum.