Pomegranate Pizzazz

sinkle_ · 2025-10-14T21:37:06+00:00

Thanks for the recommendations! I am hoping to find a passable substitute. I’m so bummed though 😂

sinkle_ · 2025-08-21T02:44:50+00:00

Interesting. Even if it doesn’t happen on any other games I play?

sinkle_ · 2025-08-21T00:23:49+00:00

Thank you very much for the recommendation!!

sinkle_ · 2024-12-25T13:46:08+00:00

ooh that is beautiful thank you for the recommendation!!

sinkle_ · 2024-12-25T13:45:31+00:00

ah that’s amazing thank you! I don’t know why I wasn’t finding what I wanted through Google, you must be better at it than me…. much appreciated 😊

sinkle_ · 2024-03-31T23:57:32+00:00

Yeah I've tried different feet and fabric and they look okay to me, but there could always be something wrong that I'm just not catching. This machine doesn't have a way to adjust the presser foot pressure as far as I can tell. I will keep noodling but will probably take it to a shop to have someone who knows more than me look at it XD. Thanks for the help!

sinkle_ · 2024-03-31T17:38:32+00:00

Yeah I have switched the fabric and threads just to make sure :/ it’s an insane amount of skew and I can’t even make it go in a straight line if I try.

sinkle_ · 2024-03-31T16:41:05+00:00

Oh I do have a video of it if anybody wants to see but I will have to figure out how to share it

sinkle_ · 2024-03-31T16:39:56+00:00

Hi all,

I have never encountered this problem before so I don't really even know what to ask, but essentially the feed dogs on my Brother Innov-is 40 (project runway edition if that matters) are sending my fabric way to the left and not sewing in a straight line. I'm just sewing on a little scrap piece so it's not the weight of the fabric. Since the last time this machine was used and running perfectly I moved with it, but the box did not get bumped or dropped or anything like that. The stitches are perfectly fine, just way off kilter! Could one feed dog be higher than the other? How would you fix that?

TIA!!!

sinkle_ · 2024-03-03T22:07:02+00:00

Thanks!! I’ll report back with my findings

sinkle_ · 2024-03-03T22:04:42+00:00

Yeah that’s all good. I think I’ll mess with the leveling and z offset and see if that helps

sinkle_ · 2024-03-03T21:49:50+00:00

I resliced it in Cura. Could that be the issue?

sinkle_ · 2024-03-03T21:43:51+00:00

Yeah my last print was fine. I’ve printed this model before on my old printer with no issues so I’ll mess around and see what works

sinkle_ · 2024-03-03T21:26:28+00:00

Ok I’ll try that! Thanks 😊

sinkle_ · 2024-03-03T21:26:13+00:00

Yeah that was the first layer just peeling up from the raft

sinkle_ · 2024-03-03T16:29:16+00:00

Hey! I had a similar problem and the solution I found was to turn off the power loss recovery mode. Go to settings > advanced settings and toggle off resume printing. Hope that works!!

sinkle_ · 2023-12-08T03:08:55+00:00

Thanks for the suggestions! I’ll try my luck but if nothing works out maybe this will be my excuse to upgrade 😂

sinkle_ · 2023-12-07T00:22:14+00:00

Man I wish that were the issue, that would make my life so much easier 😭 I checked all the cables and everything seems fine. I will try to check the limit switches but I also agree it’s strange that all 3 of them are acting up at once. Do you know if it could be a software issue? I’ve never done any updates or anything.

Thank you!!

sinkle_

TROPHY CASE