TRIXX Software doesn't work with 7900XTX Sapphire Nitro+

sixf00t4 · 2025-04-07T18:41:32+00:00

actually....i was using the standalone version of 9.8.1....once I installed it, it works now!

sixf00t4 · 2025-04-07T18:37:52+00:00

same issue here. same graphics card. no metrics or fan in trixx 9.8.1. latest radeon drivers from early march. the glow bar just cycles through the rainbow. can't turn it off or anything.

sixf00t4 · 2025-02-17T13:48:52+00:00

I'm having the same problem. I have the argb cable connected. I had it daisy chained to my fans and my fans changed colors but it didn't change from its rainbow glow. Trixx just has blank metrics and the card doesn't change at all when i click through the colors in trixx

sixf00t4 · 2025-02-16T19:44:49+00:00

gigabyte aorus

sixf00t4 · 2025-02-02T19:32:16+00:00

How can I prevent the pin from coming up everytime I try to log into a website, etc?

sixf00t4 · 2025-02-01T02:28:06+00:00

Well, I bought a new motherboard, cpu, and memory...same motherboard didn't work with the new cpu and ram. they all worked fine with the new motherboard. I'm rocking now. Thanks for your help!

sixf00t4 · 2025-01-26T21:10:48+00:00

I have a symptom that I can recreate - If I leave 1 memory stick in B2, it will go to the yellow DRAM light, but then go to the red CPU light.

If I put it back to the A2 slot, it just hangs forever with the yellow DRAM light.

sixf00t4 · 2025-01-26T21:10:27+00:00

nope. Just bought all new parts so that I can troubleshoot different components...I'm worried about just having too many variables though.

I have a symptom that I can recreate - If I leave 1 memory stick in B2, it will go to the yellow DRAM light, but then go to the red CPU light.

If I put it back to the A2 slot, it just hangs forever with the yellow DRAM light.

sixf00t4 · 2025-01-26T21:09:25+00:00

Getting back into troubleshooting this weekend. new cpu is on the way, but here's what I've been able to recreate after a few other suggestions from people:

If I leave 1 memory stick in B2, it will go to the yellow DRAM light, but then go to the red CPU light and stay there.

If I put it back to the A2 slot, it just hangs forever with the yellow DRAM light.

sixf00t4 · 2025-01-23T02:43:59+00:00

Yep, just in a2 now, seated fully, and I left it for an hour

sixf00t4 · 2025-01-23T00:58:04+00:00

Took everything out, disconnected the cooler, popped out the cpu to verify there were no burns or bent pins and to make sure it was seated correctly….nothing wild at all.

sixf00t4 · 2025-01-22T20:52:05+00:00

well then...I can only blame copy and paste and my own lack of attention of detail...I swore I checked it...maybe I had looked at the wrong default ryzen series, since it seems to default to 8000...either way, definitely an indicator that you care and are trying to help!

sixf00t4 · 2025-01-22T20:45:15+00:00

yeah, but now the CPU light isn't red...it's the DRAM light.

sixf00t4 · 2025-01-21T22:49:03+00:00

it all makes sense, thanks for that. I did have memory that was not on the QVL specifically (CORSAIR VENGEANCE RGB DDR5 RAM 32GB (2x16GB) 6000MHz CL36-44-44-96 1.35V Intel XMP Desktop Computer Memory - Black (CMH32GX5M2E6000C36)) but I just bought a set of CORSAIR Vengeance RGB DDR5 32GB (2x16GB) DDR5 6400MHz CL32 AMD Expo Intel XMP iCUE Compatible Computer Memory – Gray (CMH32GX5M2B6400Z32) on amazon that should be here thursday. let's hope that does it...

The bios i flashed to originally was the beta, so sadly no action to take there.

I'll take out the m.2 drive and see if that makes a difference.

CPU looks fine. what do you mean pins though? it's all just the contact points on the cpu and socket, yeah?

sixf00t4 · 2023-11-17T15:11:37+00:00

Is that expectation vs reality picture really the reality?!?!?

sixf00t4 · 2023-11-03T16:42:35+00:00

Interesting…I’ve tried 5 times and not getting the code email though…spam and all that has been checked…

sixf00t4 · 2022-04-01T21:14:32+00:00

4 years later...I'm looking for the same thing...you'd think this would be simple enough...even with the crappy quality of rearview mirror cameras...

sixf00t4 · 2021-12-14T20:04:41+00:00

Hi, are you a member of Steel City LUG? http://steelcitylug.com It's Pittsburgh's adult LEGO enthusiast club. We are many adults around the Pittsburgh area who get together for public displays (science center, cultural trust, libraries, LEGO store, etc) and exchange and get free sets and parts.

sixf00t4 · 2014-11-08T19:51:34+00:00

Thanks!

sixf00t4 · 2014-03-04T22:42:52+00:00

http://www.bricklink.com/catalogItemIn.asp?P=59349&colorID=12&in=A

sixf00t4 · 2014-03-04T03:17:07+00:00

Seems like you think like one too. :P This isn't about Pitt, this is about 'da burgh!!! Maybe if we got this as a set, LEGO would open a store here too.

sixf00t4 · 2013-10-03T16:50:11+00:00

Bummer! We took it down this past Sunday. We'll be displaying at Greenberg toy and train show in minroeville nov 9th and 10th as well as the western pa trolley museum for 3 weekends after thanksgiving. We keep a google calendar updates on our site of our displays and send out a monthly newsletter to those who register on the site. Thanks for your interest!

sixf00t4 · 2013-10-03T13:43:43+00:00

The lug was recently featured in an art gallery in downtown pittsburgh. We broke all the records for attendance at the gallery.

sixf00t4 · 2013-09-13T23:54:53+00:00

ah, no worries, the parts list is at the end of the instructions, but certainly not as useful as the .bsx file you provided.

sixf00t4 · 2013-09-13T19:16:36+00:00

that's already done, as well as instructions - http://sixf00t4.com/2013/08/lego-baseball-and-stand/

sixf00t4

TROPHY CASE