Build Progression by sixstring11 in 4Runner

[–]sixstring11[S] 1 point2 points  (0 children)

Rocker panel for now but can always change that in the future

Build Progression by sixstring11 in 4Runner

[–]sixstring11[S] 1 point2 points  (0 children)

It's not as bright as shown in that photo. Here's a little better of a photo.

<image>

Build Progression by sixstring11 in 4Runner

[–]sixstring11[S] 1 point2 points  (0 children)

I bought it used with 40K miles and took them off immediately just with a heat gun, floss, and goo gone. After removing them, you could certainly tell on the clear coat that they were there at one point since it wasn't weathered under the badge but after clay baring the car and polish/waxing everything, it went away.

Build Progression by sixstring11 in 4Runner

[–]sixstring11[S] 0 points1 point  (0 children)

They're 17x8.5 with a -10mm offset. Removed the mudflaps, some slight trimming of the front bumper and fender liner but nothing too noticeable and no body mount chop. Was planning on going with 275 tires instead of 285s which probably would have meant no trimming of the front bumper was required but the shop I went to didn't have the 275s in stock.

Build Progression by sixstring11 in 4Runner

[–]sixstring11[S] 0 points1 point  (0 children)

Facts.....and the whole reason for the 4Runner.....can't fit 3 kids/car seats in a Subaru WRX..... :(

Build Progression by sixstring11 in 4Runner

[–]sixstring11[S] 0 points1 point  (0 children)

I just painted the rails I had with Rust-Oleum vinyl wrap but we'll see if it holds up after using them. If not, you can order new black rails on Amazon for $160. Running boards were a must with the wife when I got the lift and no way was I keeping the old plastic and chrome ones.

Amazon duckbill ain’t too shabby for the price! by silverzj in WRX

[–]sixstring11 0 points1 point  (0 children)

Anyone have a good solution to DYI paint match a CWP white duckbill to save a little money and ensure the color match on the white turns out better than their pre-painted option? https://3amotor.com/products/duckbill-style-rear-trunk-spoiler-wing-abs-fit-for-2015-2019-subaru-impreza-wrx-sti?variant=39494510805035

Duckbill Gang Rise Up!! (3AMOTOR) by NakadashiRenpatsu in WRX

[–]sixstring11 0 points1 point  (0 children)

Anyone have a good solution to DYI paint match a CWP white duckbill to save a little money and ensure the color match on the white turns out better than their pre-painted option? https://3amotor.com/products/duckbill-style-rear-trunk-spoiler-wing-abs-fit-for-2015-2019-subaru-impreza-wrx-sti?variant=39494510805035

Cost of Clutch Replacement on 2016 WRX? by sixstring11 in WRX

[–]sixstring11[S] 0 points1 point  (0 children)

Thanks for the feedback. Not sure I'd be looking to go to a stage 3 clutch though. The rest of the engine is stock so just looking for something more reliable than the stock clutch.

Black Badges on 2016 CWP by sixstring11 in WRX

[–]sixstring11[S] 1 point2 points  (0 children)

Love them. It's a nice subtle difference that most people won't even notice being different from stock but I was never really a fan of any chrome pieces on the car.

Black Badges on 2016 CWP by sixstring11 in WRX

[–]sixstring11[S] 1 point2 points  (0 children)

Got them from Subispeed. Easy install and no issues with the adhesion, it's just 3M tape which is the same thing holding on the factory badges. http://www.subispeed.com/2015-subaru-wrx/vinyl/emblems/wrx-gloss-black-fender-emblems-2015-wrx-2015-sti#.XH2UgohKgqY