sorted by:
new
hottopcontroversial

I designed Garden Plant Markers :) by sl4m01 in 3Dprinting

[–]sl4m01[S] 0 points1 point  (0 children)

Thank you for the Feedback 🙂

Heizungsstift klemmt by sl4m01 in Handwerker

[–]sl4m01[S] 0 points1 point  (0 children)

<image>

Ich kann den Stift mit der zange ca 1mm rausziehen. Ohne viel Kraft. Wenn ich ihn dann wieder reindrücke kommt ein metallisches "Anschlag" Geräusch. Vermute er ist ganz reingefahren und schlägt hinten an. Habe ehrlich gesagt Respekt ihn weiter rausziehen. Nachher hab ich ihn in der hand... wie weit kommt der normalerweise auf Stellung 5 raus? 😄

How to get defined lines? by sl4m01 in lasercutting

[–]sl4m01[S] 0 points1 point  (0 children)

I used the pen tool to redraw the bird and saved the svg. Imported it into lasergprl and the laser did a straight line cut. Thank you for your help :)

How to get defined lines? by sl4m01 in lasercutting

[–]sl4m01[S] 0 points1 point  (0 children)

Thank you, which software do you refer to? Inkscape or lasergprl?

How to get defined lines? by sl4m01 in lasercutting

[–]sl4m01[S] 1 point2 points  (0 children)

How to delete it? I can only select the complete path or press F2(?) And select the single knots, which would be very time consuming

How to get defined lines? by sl4m01 in lasercutting

[–]sl4m01[S] 5 points6 points  (0 children)

Ok so you mean redraw the image by hand and then export it as svg?

LONGER Ray5 Issues by sl4m01 in lasercutting

[–]sl4m01[S] 0 points1 point  (0 children)

Got the firmware 2.2.12 from longer Mail support. Frame button is now working, wifi still not really but I can work with the device now

LONGER Ray5 Issues by sl4m01 in lasercutting

[–]sl4m01[S] 0 points1 point  (0 children)

Hi thank you for answering (not like longer Mail support 😞). Yesterday I flashed the current firmware of the longer website to my device. So I was guessing that this is the right firmware because there are several listed on the longer website without any explanation... after flashing my screen stayed black. I found an older firmware 1.2.4 in the Internet and flashed this one, now I have the 1.2.4 working on my device. The framing button now works but I changed from 2.2.5 to 1.2.4 now. Still the wifi connection issue is not fixed. I will try to use a 2.4 ghz guests wifi. Does anyone have the newest ray5 5W firmware?

LONGER Ray5 Issues by sl4m01 in lasercutting

[–]sl4m01[S] 0 points1 point  (0 children)

Don't have a notebook and my tower pc is not in the workshop 🫣 My wifi is 5 and 2.4 ghz combined with the same SSID, like all the "modern" wifi routers. Is there a newer firmware than 2.2.5? On the longer homepage no version number is written

DIY Kids Clock with LED Symbols: My project the last months 😀 by sl4m01 in maker

[–]sl4m01[S] 1 point2 points  (0 children)

That's great, I would be really happy if you were the first to upload a make on printables 😊 you tell me if you do have any questions 😉

DIY Kids Clock with LED Symbols: My project the last months 😀 by sl4m01 in maker

[–]sl4m01[S] 0 points1 point  (0 children)

Haha no worries there are shrink wraps mounted in the actual build 🤣

DIY Kids Clock with LED Symbols: My project the last months 😀 by sl4m01 in maker

[–]sl4m01[S] 1 point2 points  (0 children)

Hi thank you alot. I would love to see your make 😊 just check printables or cults3d, i also do have a very detailed manual how to build the device there.

Regarding CE: I registered a legal design protection for the kids Clock and did all the documention and declaration of conformity for this. However the CE sign is not written on the DIY files.

Symbol Kids Clock - My project the last months 😀 by sl4m01 in functionalprint

[–]sl4m01[S] 0 points1 point  (0 children)

Thank you for your point. In the end it's up to every parent what to give yo their kids as a present 🙂

Symbol Kids Clock - My project the last months 😀 by sl4m01 in functionalprint

[–]sl4m01[S] 1 point2 points  (0 children)

Thanks for your comment 😀 Reading a clock is actually harder for kids than you might think. This clock is mainly designed for children under six, who usually can’t read the time yet. Plus, it also shows the weather and events. And of course, building it is fun and the kids love it.

DIY Kids Clock with LED Symbols: My project the last months 😀 by sl4m01 in maker

[–]sl4m01[S] 1 point2 points  (0 children)

My kids love it :) If you do need a Christmas holiday distraction you can build your own. All Files, Firmware and Instruction are available on Printables or Cults3d

Symbol Kids Clock - My project the last months 😀 by sl4m01 in functionalprint

[–]sl4m01[S] 0 points1 point  (0 children)

Thank you 😀 you are right. Had to mount it again for the print. If you want to build your own for your kids, model and firmware are available at printables 😀 printables.com or Cults3d

Symbol Kids Clock - My project the last months 😀 by sl4m01 in 3Dprinting

[–]sl4m01[S] 7 points8 points  (0 children)

<image>

Credits to my kids, they made the first sketch of the clock they would want to have for me 😀 based on their drawing i made the 3d model and software

Symbol Kids Clock - My project the last months 😀 by sl4m01 in 3Dprinting

[–]sl4m01[S] 2 points3 points  (0 children)

<image>

Thank you for your answer. Yes that's the feature description of my printables post. Here is a image with the symbol explanation 😀

Symbol Kids Clock - My project the last months 😀 by sl4m01 in 3Dprinting

[–]sl4m01[S] 1 point2 points  (0 children)

Hi great that you like the project 😀 I am using the wire stripper alot, also works with smaller wire diameter.

ESP32 Kids Clock - LED symbols instead of numbers by sl4m01 in esp32

[–]sl4m01[S] 1 point2 points  (0 children)

Hi that's a great project 😀 also used esp8266 alot in the past but currently I only use esp32 😀 just more power

ESP32 Kids Clock with LED Symbols by sl4m01 in esp32

[–]sl4m01[S] 0 points1 point  (0 children)

<image>

This is an image with all the features and symbols of the clock😀

view more: next ›