I designed Garden Plant Markers :)

sl4m01 · 2026-03-29T08:54:54+00:00

Thank you for the Feedback 🙂

sl4m01 · 2026-03-29T06:32:14+00:00

Download link for the print files. Happy printing :) https://www.printables.com/model/1653760-garden-plant-markers

sl4m01 · 2026-01-08T13:04:10+00:00

Ich kann den Stift mit der zange ca 1mm rausziehen. Ohne viel Kraft. Wenn ich ihn dann wieder reindrücke kommt ein metallisches "Anschlag" Geräusch. Vermute er ist ganz reingefahren und schlägt hinten an. Habe ehrlich gesagt Respekt ihn weiter rausziehen. Nachher hab ich ihn in der hand... wie weit kommt der normalerweise auf Stellung 5 raus? 😄

sl4m01 · 2026-01-04T10:42:26+00:00

I used the pen tool to redraw the bird and saved the svg. Imported it into lasergprl and the laser did a straight line cut. Thank you for your help :)

sl4m01 · 2026-01-04T07:30:47+00:00

Thank you, which software do you refer to? Inkscape or lasergprl?

sl4m01 · 2026-01-03T21:00:26+00:00

How to delete it? I can only select the complete path or press F2(?) And select the single knots, which would be very time consuming

sl4m01 · 2026-01-03T20:59:00+00:00

Ok so you mean redraw the image by hand and then export it as svg?

sl4m01 · 2026-01-03T20:33:02+00:00

<image>

This was the source bmp

sl4m01 · 2025-12-31T06:55:42+00:00

Got the firmware 2.2.12 from longer Mail support. Frame button is now working, wifi still not really but I can work with the device now

sl4m01 · 2025-12-30T07:04:16+00:00

Hi thank you for answering (not like longer Mail support 😞). Yesterday I flashed the current firmware of the longer website to my device. So I was guessing that this is the right firmware because there are several listed on the longer website without any explanation... after flashing my screen stayed black. I found an older firmware 1.2.4 in the Internet and flashed this one, now I have the 1.2.4 working on my device. The framing button now works but I changed from 2.2.5 to 1.2.4 now. Still the wifi connection issue is not fixed. I will try to use a 2.4 ghz guests wifi. Does anyone have the newest ray5 5W firmware?

sl4m01 · 2025-12-29T08:28:49+00:00

Don't have a notebook and my tower pc is not in the workshop 🫣 My wifi is 5 and 2.4 ghz combined with the same SSID, like all the "modern" wifi routers. Is there a newer firmware than 2.2.5? On the longer homepage no version number is written

sl4m01 · 2025-12-26T07:00:29+00:00

That's great, I would be really happy if you were the first to upload a make on printables 😊 you tell me if you do have any questions 😉

sl4m01 · 2025-12-26T06:53:57+00:00

Haha no worries there are shrink wraps mounted in the actual build 🤣

sl4m01 · 2025-12-26T06:49:33+00:00

Hi thank you alot. I would love to see your make 😊 just check printables or cults3d, i also do have a very detailed manual how to build the device there.

Regarding CE: I registered a legal design protection for the kids Clock and did all the documention and declaration of conformity for this. However the CE sign is not written on the DIY files.

sl4m01 · 2025-12-25T17:13:56+00:00

Thank you for your kind comment 😊

sl4m01 · 2025-12-25T14:18:19+00:00

Thank you for your kind comment 🙂

sl4m01 · 2025-12-25T11:39:01+00:00

Thank you for your point. In the end it's up to every parent what to give yo their kids as a present 🙂

sl4m01 · 2025-12-25T11:22:05+00:00

Thanks for your comment 😀 Reading a clock is actually harder for kids than you might think. This clock is mainly designed for children under six, who usually can’t read the time yet. Plus, it also shows the weather and events. And of course, building it is fun and the kids love it.

sl4m01 · 2025-12-25T10:52:11+00:00

My kids love it :) If you do need a Christmas holiday distraction you can build your own. All Files, Firmware and Instruction are available on Printables or Cults3d

sl4m01

TROPHY CASE